QML Toolbox flashes XD75 successfully but keyboard will not work

[df111]

I use QMK configurator ( https://config.qmk.fm/#/xd75/LAYOUT_ortho_5x15 ) to create my keymap for xd75re bought from kprepublic (the same model keyboard referenced in the qmk configurator code for the xd75). I configure the keymap to be simple as a test just assigning each a letter (nothing fancy no layers). I flash it to my xd75 using qmk toolbox. It is successful. See message below.

But when i type on my keyboard all sorts of windows pop open and weird stuff happens. Most keys do nothing.

I have spent hours on this. Going through every reddit post. I have limited knowledge so programming a c file myself and editing source code is out of the question. I basically just follow the noobs tutorial for the tools above and it all worked as it should. But the keyboard doesnt work.

*** DFU device connected: ATmega32U4 -- 03EB:2FF4:0001 {eb781aaf-9c70-4523-a5df-642a87eca567}

Something went wrong when trying to get the keyboard list from QMK.FM, you might not have a internet connection or the servers are down.

*** Attempting to flash, please don't remove device

dfu-programmer.exe atmega32u4 erase --force

Erasing flash... Success

Checking memory from 0x0 to 0x6FFF... Empty.

dfu-programmer.exe atmega32u4 flash "C:\Users\redacted\Documents\1-Personal\Filing Cabinet\Projects\Keyboard\XD75\xd75_layout_mine 2.hex"

Checking memory from 0x0 to 0x5EFF... Empty.

0% 100% Programming 0x5F00 bytes...

dfu-programmer.exe atmega32u4 reset

[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success

0% 100% Reading 0x7000 bytes...

[>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>] Success

Validating... Success

0x5F00 bytes written into 0x7000 bytes memory (84.82%).

*** DFU device disconnected: ATmega32U4 -- 03EB:2FF4:0001 {eb781aaf-9c70-4523-a5df-642a87eca567}

[drashna]

Just to make sure, does unplugging and replugging in the board fix the issue?

[df111]

no it does not.

i have spent about 15 hours trying to make it work now. i have done hand stands in between pulling it out and plugging it back in. that doesnt work either

[fauxpark]

Did you try resetting the EEPROM?

[drashna]

Also, are you sure it's not this board?

https://config.qmk.fm/#/idobo/LAYOUT_ortho_5x15

[markstos]

There's been no further follow-up from the post author for a couple months. Should this be closed?

[stale]

This issue has been automatically marked as resolved because it has not had activity in the last 90 days. It will be closed in the next 30 days unless it is tagged properly or other activity occurs.

[stale]

This issue has been automatically closed because it has not had activity in the last 30 days. If this issue is still valid, re-open the issue and let us know.