Key Line Inhibit During Tune

[kw4ex]

Need for not keying amplifier while generation Tune signal

Describe the solution you'd like

Option for Thetis - Do not toggle the “Key Line” when pressing the TUN option. This would allow an external tuner to be used without keying an amplifier.

[ramdor]

wire the keyline through a relay that uses the OC pins, and configure the Transmit Pin Action accordingly

[laurencebarker]

This is a firmware issue, not a Thetis one. Laurence Barker G8NJJ ***@***.*** From: kw4ex ***@***.***> Sent: Tuesday, January 16, 2024 8:20 PM To: ramdor/Thetis ***@***.***> Cc: Subscribed ***@***.***> Subject: [ramdor/Thetis] Key Line Inhibit During Tune (Issue #391) Need for not keying amplifier while generation Tune signal Describe the solution you'd like Option for Thetis - Do not toggle the “Key Line” when pressing the TUN option. This would allow an external tuner to be used without keying an amplifier. — Reply to this email directly, view it on GitHub <#391> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AEXTXZ55MPMS6IX53F4T3QDYO3OG7AVCNFSM6AAAAABB5NCP42VHI2DSMVQWIX3LMV43ASLTON2WKOZSGA4DIOBRGEYTGNY> . You are receiving this because you are subscribed to this thread. <https://github.com/notifications/beacon/AEXTXZ5QHY4ZFDVFRAFZTSLYO3OG7A5CNFSM6AAAAABB5NCP42WGG33NNVSW45C7OR4XAZNFJFZXG5LFVJRW63LNMVXHIX3JMTHHYQ5RQE.gif> Message ID: ***@***.*** ***@***.***> >

[RdWing]

wire the keyline through a relay that uses the OC pins, and configure the Transmit Pin Action accordingly

The only problem with this, and this might be a firmware problem, but CW via QSK will fail to key the OC pin used for amp keying.