webui_macros300elf.cfg

[virtual_sdcard]
path: /home/pi/gcode_files

[pause_resume]

[display_status]

[gcode_macro CANCEL_PRINT]
description: Cancel the actual running print
rename_existing: CANCEL_PRINT_BASE
gcode:
    TURN_OFF_HEATERS
    CANCEL_PRINT_BASE

[gcode_macro PAUSE]
description: Pause the actual running print
rename_existing: PAUSE_BASE
# change this if you need more or less extrusion
variable_extrude: 1.0
gcode:
    ##### read E from pause macro #####
    {% set E = printer["gcode_macro PAUSE"].extrude|float %}
    ##### set park positon for x and y #####
    # default is your max posion from your printer.cfg
    {% set x_park = printer.toolhead.axis_maximum.x|float - 5.0 %}
    {% set y_park = printer.toolhead.axis_maximum.y|float - 5.0 %}
    ##### calculate save lift position #####
    {% set max_z = printer.toolhead.axis_maximum.z|float %}
    {% set act_z = printer.toolhead.position.z|float %}
    {% if act_z < (max_z - 2.0) %}
        {% set z_safe = 2.0 %}
    {% else %}
        {% set z_safe = max_z - act_z %}
    {% endif %}
    ##### end of definitions #####
    PAUSE_BASE
    G91
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G1 E-{E} F2100
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}
    {% if "xyz" in printer.toolhead.homed_axes %}
      G1 Z{z_safe} F900
      G90
      G1 X{x_park} Y{y_park} F6000
    {% else %}
      {action_respond_info("Printer not homed")}
    {% endif %} 
    
[gcode_macro RESUME]
description: Resume the actual running print
rename_existing: RESUME_BASE
gcode:
    ##### read E from pause macro #####
    {% set E = printer["gcode_macro PAUSE"].extrude|float %}
    #### get VELOCITY parameter if specified ####
    {% if 'VELOCITY' in params|upper %}
      {% set get_params = ('VELOCITY=' + params.VELOCITY)  %}
    {%else %}
      {% set get_params = "" %}
    {% endif %}
    ##### end of definitions #####
    {% if printer.extruder.can_extrude|lower == 'true' %}
      G91
      G1 E{E} F2100
    {% else %}
      {action_respond_info("Extruder not hot enough")}
    {% endif %}  
    RESUME_BASE {get_params}
[firmware_retraction]
retract_length: 1.2
#   The length of filament (in mm) to retract when G10 is activated,
#   and to unretract when G11 is activated (but see
#   unretract_extra_length below). The default is 0 mm.
retract_speed: 30
#   The speed of retraction, in mm/s. The default is 20 mm/s.
#unretract_extra_length: 0
#   The length (in mm) of *additional* filament to add when
#   unretracting.
unretract_speed: 20
#   The speed of unretraction, in mm/s. The default is 10 mm/s.
[gcode_macro PRINT_START8]
#   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
gcode:

    G1 X50 Y0 F2000 ; move to prime
    G92 E0 ; reset extrusion distance
    G1 Z0.6 F2000 ; get ready to prime
    G1 X100 E4 F1000 ; Unretract and wipe
    G1 X200 E30 F2000 ; prime nozzle
    G1 X250  F3000 ; quick wipe   
[gcode_macro PRINT_START6]
#   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
gcode:

    G1 X50 Y0 F2000 ; move to prime
    G92 E0 ; reset extrusion distance
    G1 Z0.4 F2000 ; get ready to prime
    G1 X100 E6 F1000 ; Unretract and wipe
    G1 X200 E20 F2000 ; prime nozzle
    G1 X250  F3000 ; quick wipe   
[gcode_macro PRINT_START4]
#   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
gcode:


    G1 X50 Y0 F4000 ; move to prime
    G92 E0 ; reset extrusion distance
    G1 Z0.3 F2000 ; get ready to prime
    G1 X100 E4 F1000 ; Unretract and wipe
    G1 X200 E16 F2000 ; prime nozzle
    G1 X250  F3000 ; quick wipe

[gcode_macro PRINT_START2]
#   Use PRINT_START for the slicer starting script - please customise for your slicer of choice
gcode:
    G1 X50 Y0 F4000 ; move to prime
    G92 E0 ; reset extrusion distance
    G1 Z0.16 F2000 ; get ready to prime
    G1 X100 E2 F1000 ; Unretract and wipe
    G1 X200 E4 F2000 ; prime nozzle
    G1 X250  F3000 ; quick wipe
    
[gcode_macro PRINT_END]
#   Use PRINT_END for the slicer ending script - please customise for your slicer of choice
gcode:
    M400                           ; wait for buffer to clear
    G92 E0                         ; zero the extruder
    G1 E-4.0 F3600                ; retract filament
    G91                            ; relative positioning
    G0 Z1.00 X2.0 Y2.0 F20000    ; move nozzle to remove stringing
    TURN_OFF_HEATERS
    M107                           ; turn off fan
    G1 Z20 F3000                    ; move nozzle up 2mm
    G90                            ; absolute positioning
    G0  X150 Y290 F3600       ; park nozzle at center

    
    
## 	Thermistor Types
##   "EPCOS 100K B57560G104F"
##   "ATC Semitec 104GT-2"
##   "NTC 100K beta 3950"
##   "Honeywell 100K 135-104LAG-J01"
##   "NTC 100K MGB18-104F39050L32" (Keenovo Heater Pad)
##   "AD595"
##   "PT100 INA826"


[gcode_macro UNLOAD_FILAMENT]
gcode:
    M83
    G1 E10 F300
    G1 E-100 F1800
    M82

[gcode_macro LOAD_FILAMENT]
gcode:
    M83
    G1 E70 F1800
    G1 E30 F300
    G1 E15 F150
    G1 E-3
    M82

[idle_timeout]
gcode:

    M84
    TURN_OFF_HEATERS
timeout: 1800


[gcode_macro TIMELAPSE_TAKE_FRAME]
gcode:
 {action_call_remote_method("timelapse_newframe")}

[gcode_macro TIMELAPSE_RENDER]
gcode:
 {action_call_remote_method("timelapse_render")}