r30gb - Dome Guard - rebooting

[rpkilgore]

I bought 2 brand new Dome Guard cams (r30gb), and when I apply the hack it just constantly reboots.
So far I have tried to disabled things 1 at a time by changing things to no in the system.comf until I had everything disabled including the web service. It still reboots unless I wipe everything off the sd card or boot it up without an sd card. Also tried enabling just the swap file and same results.
I'm attaching a dump of both the hacked cam and the clean cam. to see if that helps.

I have 2 older versions of the exact cam and the hack works on them, but I did notice some differences in the mtd.txt. Attaching the dump from those cams too.

backup_DomeGuard_older.zip
r30gb_backup_clean.zip
r30gb_backup_hacked.zip

Thanks,
Robert

[roleoroleo]

New cams are r35gb, not r30gb.
But the hack worked properly, this explains why the cam doesn't reboot when you remove the card.
Try r35gb file.

[rpkilgore]

That did the trick. Thanks!

[roleoroleo]

Thank you very much for your donation!

[rpkilgore]

No problem.. Thank you for maintaining this repo so well. That was also for the excellent unbrick tool (saving me from buying another cam) and for the quick answer to my question :)