spell out status LED colors on PDF and BOM #57
Milestone
Comments
rusefi
pushed a commit
to rusefi/rusefi
that referenced
this issue
Jun 10, 2019
|
Is this OK? PE1 is orange - warning I just changed the PE# to match the BOM which I think Matt had created. I figured changing the note was easier than changing the BOM. Let me know if this should change. I think this is now closed. |
jharvey
pushed a commit
to jharvey/hw_microRusEfi
that referenced
this issue
Jul 5, 2019
|
Any pinout would work for me, very easy yo change on my end |
rusefi
pushed a commit
that referenced
this issue
Jul 5, 2019
…es and pads changed slightly (#78) * Update * removed fp-info-cache from git * Gerbers * moved connector * Mostly Ola's e-mailed copy, plus some of my own fixes to his almost done revision. I also did some house cleaning, with boundary edges, removed most DRC and ERC errors, etc. * added Fiducial's * Updated logo symbol and footprint, BOM is 99% entered in KC schematic now. * Several U# were changed to RN# as they are resistor networks, not semiconductor chips. RN1 is now clearly a 1k. * Several U# were changed to RN# as they are resistor networks, not semiconductor chips. RN1 is now clearly a 1k. Also some U# were changed to CN#. BOM is now completely populated. * Some general MISC cleanup of overlapping text, etc. * Added LED note to schematic and PCB silk. #57 * Changed net names, per issue 63, also added many thermal via's and several electrical GND via's. #63 * Added branding per issue 68, as well added 1,2,3,4 copper layer to clarify to PCB MFG's what the stack up is. #68 * For issue 65, I added a comment to the PCB silk and to the schematic about power consumption. #65 * some very mild schematic clean up * Some unused pads exposed to be accessible as test points, etc. * Minor schematic text changes to VDD on STM32 page.
rusefi
pushed a commit
that referenced
this issue
Jul 7, 2019
* Update * removed fp-info-cache from git * Gerbers * moved connector * Mostly Ola's e-mailed copy, plus some of my own fixes to his almost done revision. I also did some house cleaning, with boundary edges, removed most DRC and ERC errors, etc. * added Fiducial's * Updated logo symbol and footprint, BOM is 99% entered in KC schematic now. * Several U# were changed to RN# as they are resistor networks, not semiconductor chips. RN1 is now clearly a 1k. * Several U# were changed to RN# as they are resistor networks, not semiconductor chips. RN1 is now clearly a 1k. Also some U# were changed to CN#. BOM is now completely populated. * Some general MISC cleanup of overlapping text, etc. * Added LED note to schematic and PCB silk. #57 * Changed net names, per issue 63, also added many thermal via's and several electrical GND via's. #63 * Added branding per issue 68, as well added 1,2,3,4 copper layer to clarify to PCB MFG's what the stack up is. #68 * For issue 65, I added a comment to the PCB silk and to the schematic about power consumption. #65 * some very mild schematic clean up * Some unused pads exposed to be accessible as test points, etc. * Minor schematic text changes to VDD on STM32 page. * updated BOM's * added MRE logo to project specific library * Added LED's for CAM / CRANK. #75 Added silk screen for 48 pin connector. #25 * Added "net-tie"'s to the schematic and layout removing the final ERC warnings. #70 * Update silk screen to indicate OLA was the primary contributor to R0.1, and DAECU was the contributor to R0.2. This is per Ola's request to remove his name from this board. * Added LED's for one ignition, one injector, and one VVT output. #76
rusefi
pushed a commit
that referenced
this issue
Jul 8, 2019
* Update * removed fp-info-cache from git * Gerbers * moved connector * Mostly Ola's e-mailed copy, plus some of my own fixes to his almost done revision. I also did some house cleaning, with boundary edges, removed most DRC and ERC errors, etc. * added Fiducial's * Updated logo symbol and footprint, BOM is 99% entered in KC schematic now. * Several U# were changed to RN# as they are resistor networks, not semiconductor chips. RN1 is now clearly a 1k. * Several U# were changed to RN# as they are resistor networks, not semiconductor chips. RN1 is now clearly a 1k. Also some U# were changed to CN#. BOM is now completely populated. * Some general MISC cleanup of overlapping text, etc. * Added LED note to schematic and PCB silk. #57 * Changed net names, per issue 63, also added many thermal via's and several electrical GND via's. #63 * Added branding per issue 68, as well added 1,2,3,4 copper layer to clarify to PCB MFG's what the stack up is. #68 * For issue 65, I added a comment to the PCB silk and to the schematic about power consumption. #65 * some very mild schematic clean up * Some unused pads exposed to be accessible as test points, etc. * Minor schematic text changes to VDD on STM32 page. * updated BOM's * added MRE logo to project specific library * Added LED's for CAM / CRANK. #75 Added silk screen for 48 pin connector. #25 * Added "net-tie"'s to the schematic and layout removing the final ERC warnings. #70 * Update silk screen to indicate OLA was the primary contributor to R0.1, and DAECU was the contributor to R0.2. This is per Ola's request to remove his name from this board. * Added LED's for one ignition, one injector, and one VVT output. #76 * Gerbers for R0.2 released. * Released schematics nd PCB dimensions for R0.2 * PDF of R0.2 schematic.
rusefi
pushed a commit
that referenced
this issue
Jul 13, 2019
* Update * removed fp-info-cache from git * Gerbers * moved connector * Mostly Ola's e-mailed copy, plus some of my own fixes to his almost done revision. I also did some house cleaning, with boundary edges, removed most DRC and ERC errors, etc. * added Fiducial's * Updated logo symbol and footprint, BOM is 99% entered in KC schematic now. * Several U# were changed to RN# as they are resistor networks, not semiconductor chips. RN1 is now clearly a 1k. * Several U# were changed to RN# as they are resistor networks, not semiconductor chips. RN1 is now clearly a 1k. Also some U# were changed to CN#. BOM is now completely populated. * Some general MISC cleanup of overlapping text, etc. * Added LED note to schematic and PCB silk. #57 * Changed net names, per issue 63, also added many thermal via's and several electrical GND via's. #63 * Added branding per issue 68, as well added 1,2,3,4 copper layer to clarify to PCB MFG's what the stack up is. #68 * For issue 65, I added a comment to the PCB silk and to the schematic about power consumption. #65 * some very mild schematic clean up * Some unused pads exposed to be accessible as test points, etc. * Minor schematic text changes to VDD on STM32 page. * updated BOM's * added MRE logo to project specific library * Added LED's for CAM / CRANK. #75 Added silk screen for 48 pin connector. #25 * Added "net-tie"'s to the schematic and layout removing the final ERC warnings. #70 * Update silk screen to indicate OLA was the primary contributor to R0.1, and DAECU was the contributor to R0.2. This is per Ola's request to remove his name from this board. * Added LED's for one ignition, one injector, and one VVT output. #76 * Gerbers for R0.2 released. * Released schematics nd PCB dimensions for R0.2 * PDF of R0.2 schematic. * Created LED footprint which better matches the MFG's suggested footprint, as well it includes a clear polarity indicator. #81 Changed VVT, injector, and coil LED's to turn on when the device is being driven. #82 * Moved via's to prevent them from sucking solder off pads, bumped it back to R0.2 as it had never been ordered, so R0.2.1 was not needed. * Added silk screen to J2 which indicates which way to install the header. #49 * Corrected silk screen from last commit, J2 now has proper orientation mark. https://rusefi.com/forum/viewtopic.php?f=4&t=381&start=61 #49 * Updated 1k/1.5k resistor arrays, updated 2.7k's and R141. Changed several K's into k's for consistent ref designation names. #51
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
PE1 is blue - communication
PE2 is red - fatal
PE3 is green - running
PE4 is orange - warning
The text was updated successfully, but these errors were encountered: