-
Notifications
You must be signed in to change notification settings - Fork 445
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Unexpected SetMatches::len()
behavior
#625
Comments
I probably agree that |
In looking over past issues, I stumbled on this one and realized that there is no |
I see there is a |
Oh, whoops. I did not re-read the issue closely enough. I think the fix here is to clarify the docs. If I could do it over, I'd choose different names. |
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
It is really unfortunate, but SetMatches::len and SetMatcher::iter().count() do not correspond go the same thing. It's not clear why I even added the SetMatches::len method in the first place, but it always returns the number of regexes in the set, and not the number of regexes that matched. We can't change the name (or remove the method) obviously, but we do add a warning to the docs. Fixes #625
1.8.0 (2023-04-20) ================== This is a sizeable release that will be soon followed by another sizeable release. Both of them will combined close over 40 existing issues and PRs. This first release, despite its size, essentially represent preparatory work for the second release, which will be even bigger. Namely, this release: * Increases the MSRV to Rust 1.60.0, which was released about 1 year ago. * Upgrades its dependency on `aho-corasick` to the recently release 1.0 version. * Upgrades its dependency on `regex-syntax` to the simultaneously released `0.7` version. The changes to `regex-syntax` principally revolve around a rewrite of its literal extraction code and a number of simplifications and optimizations to its high-level intermediate representation (HIR). The second release, which will follow ~shortly after the release above, will contain a soup-to-nuts rewrite of every regex engine. This will be done by bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into this repository, and then changing the `regex` crate to be nothing but an API shim layer on top of `regex-automata`'s API. These tandem releases are the culmination of about 3 years of on-and-off work that [began in earnest in March 2020](#656). Because of the scale of changes involved in these releases, I would love to hear about your experience. Especially if you notice undocumented changes in behavior or performance changes (positive *or* negative). Most changes in the first release are listed below. For more details, please see the commit log, which reflects a linear and decently documented history of all changes. New features: * [FEATURE #501](#501): Permit many more characters to be escaped, even if they have no significance. More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be escaped. Also, a new routine, `is_escapeable_character`, has been added to `regex-syntax` to query whether a character is escapeable or not. * [FEATURE #547](#547): Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise introduce any new expressive power. * [FEATURE #595](#595): Capture group names are now Unicode-aware. They can now begin with either a `_` or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and `]`. Note that replacement syntax has not changed. * [FEATURE #810](#810): Add `Match::is_empty` and `Match::len` APIs. * [FEATURE #905](#905): Add an `impl Default for RegexSet`, with the default being the empty set. * [FEATURE #908](#908): A new method, `Regex::static_captures_len`, has been added which returns the number of capture groups in the pattern if and only if every possible match always contains the same number of matching groups. * [FEATURE #955](#955): Named captures can now be written as `(?<name>re)` in addition to `(?P<name>re)`. * FEATURE: `regex-syntax` now supports empty character classes. * FEATURE: `regex-syntax` now has an optional `std` feature. (This will come to `regex` in the second release.) * FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications made to it. * FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF mode. This will be supported in `regex` proper in the second release. * FEATURE: `regex-syntax` now has proper support for "regex that never matches" via `Hir::fail()`. * FEATURE: The `hir::literal` module of `regex-syntax` has been completely re-worked. It now has more documentation, examples and advice. * FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed to `utf8`, and the meaning of the boolean has been flipped. Performance improvements: * PERF: The upgrade to `aho-corasick 1.0` may improve performance in some cases. It's difficult to characterize exactly which patterns this might impact, but if there are a small number of longish (>= 4 bytes) prefix literals, then it might be faster than before. Bug fixes: * [BUG #514](#514): Improve `Debug` impl for `Match` so that it doesn't show the entire haystack. * BUGS [#516](#516), [#731](#731): Fix a number of issues with printing `Hir` values as regex patterns. * [BUG #610](#610): Add explicit example of `foo|bar` in the regex syntax docs. * [BUG #625](#625): Clarify that `SetMatches::len` does not (regretably) refer to the number of matches in the set. * [BUG #660](#660): Clarify "verbose mode" in regex syntax documentation. * BUG [#738](#738), [#950](#950): Fix `CaptureLocations::get` so that it never panics. * [BUG #747](#747): Clarify documentation for `Regex::shortest_match`. * [BUG #835](#835): Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`. * [BUG #846](#846): Add more clarifying documentation to the `CompiledTooBig` error variant. * [BUG #854](#854): Clarify that `regex::Regex` searches as if the haystack is a sequence of Unicode scalar values. * [BUG #884](#884): Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute. * [BUG #893](#893): Optimize case folding since it can get quite slow in some pathological cases. * [BUG #895](#895): Reject `(?-u:\W)` in `regex::Regex` APIs. * [BUG #942](#942): Add a missing `void` keyword to indicate "no parameters" in C API. * [BUG #965](#965): Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`. * [BUG #975](#975): Clarify documentation for `\pX` syntax.
1.8.0 (2023-04-20) ================== This is a sizeable release that will be soon followed by another sizeable release. Both of them will combined close over 40 existing issues and PRs. This first release, despite its size, essentially represent preparatory work for the second release, which will be even bigger. Namely, this release: * Increases the MSRV to Rust 1.60.0, which was released about 1 year ago. * Upgrades its dependency on `aho-corasick` to the recently release 1.0 version. * Upgrades its dependency on `regex-syntax` to the simultaneously released `0.7` version. The changes to `regex-syntax` principally revolve around a rewrite of its literal extraction code and a number of simplifications and optimizations to its high-level intermediate representation (HIR). The second release, which will follow ~shortly after the release above, will contain a soup-to-nuts rewrite of every regex engine. This will be done by bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into this repository, and then changing the `regex` crate to be nothing but an API shim layer on top of `regex-automata`'s API. These tandem releases are the culmination of about 3 years of on-and-off work that [began in earnest in March 2020](#656). Because of the scale of changes involved in these releases, I would love to hear about your experience. Especially if you notice undocumented changes in behavior or performance changes (positive *or* negative). Most changes in the first release are listed below. For more details, please see the commit log, which reflects a linear and decently documented history of all changes. New features: * [FEATURE #501](#501): Permit many more characters to be escaped, even if they have no significance. More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be escaped. Also, a new routine, `is_escapeable_character`, has been added to `regex-syntax` to query whether a character is escapeable or not. * [FEATURE #547](#547): Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise introduce any new expressive power. * [FEATURE #595](#595): Capture group names are now Unicode-aware. They can now begin with either a `_` or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and `]`. Note that replacement syntax has not changed. * [FEATURE #810](#810): Add `Match::is_empty` and `Match::len` APIs. * [FEATURE #905](#905): Add an `impl Default for RegexSet`, with the default being the empty set. * [FEATURE #908](#908): A new method, `Regex::static_captures_len`, has been added which returns the number of capture groups in the pattern if and only if every possible match always contains the same number of matching groups. * [FEATURE #955](#955): Named captures can now be written as `(?<name>re)` in addition to `(?P<name>re)`. * FEATURE: `regex-syntax` now supports empty character classes. * FEATURE: `regex-syntax` now has an optional `std` feature. (This will come to `regex` in the second release.) * FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications made to it. * FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF mode. This will be supported in `regex` proper in the second release. * FEATURE: `regex-syntax` now has proper support for "regex that never matches" via `Hir::fail()`. * FEATURE: The `hir::literal` module of `regex-syntax` has been completely re-worked. It now has more documentation, examples and advice. * FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed to `utf8`, and the meaning of the boolean has been flipped. Performance improvements: * PERF: The upgrade to `aho-corasick 1.0` may improve performance in some cases. It's difficult to characterize exactly which patterns this might impact, but if there are a small number of longish (>= 4 bytes) prefix literals, then it might be faster than before. Bug fixes: * [BUG #514](#514): Improve `Debug` impl for `Match` so that it doesn't show the entire haystack. * BUGS [#516](#516), [#731](#731): Fix a number of issues with printing `Hir` values as regex patterns. * [BUG #610](#610): Add explicit example of `foo|bar` in the regex syntax docs. * [BUG #625](#625): Clarify that `SetMatches::len` does not (regretably) refer to the number of matches in the set. * [BUG #660](#660): Clarify "verbose mode" in regex syntax documentation. * BUG [#738](#738), [#950](#950): Fix `CaptureLocations::get` so that it never panics. * [BUG #747](#747): Clarify documentation for `Regex::shortest_match`. * [BUG #835](#835): Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`. * [BUG #846](#846): Add more clarifying documentation to the `CompiledTooBig` error variant. * [BUG #854](#854): Clarify that `regex::Regex` searches as if the haystack is a sequence of Unicode scalar values. * [BUG #884](#884): Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute. * [BUG #893](#893): Optimize case folding since it can get quite slow in some pathological cases. * [BUG #895](#895): Reject `(?-u:\W)` in `regex::Regex` APIs. * [BUG #942](#942): Add a missing `void` keyword to indicate "no parameters" in C API. * [BUG #965](#965): Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`. * [BUG #975](#975): Clarify documentation for `\pX` syntax.
This PR contains the following updates: | Package | Type | Update | Change | |---|---|---|---| | [regex](https://github.com/rust-lang/regex) | dependencies | minor | `1.7.3` -> `1.8.1` | --- ### Release Notes <details> <summary>rust-lang/regex</summary> ### [`v1.8.1`](https://github.com/rust-lang/regex/blob/HEAD/CHANGELOG.md#​181-2023-04-21) \================== This is a patch release that fixes a bug where a regex match could be reported where none was found. Specifically, the bug occurs when a pattern contains some literal prefixes that could be extracted *and* an optional word boundary in the prefix. Bug fixes: - [BUG #​981](rust-lang/regex#981): Fix a bug where a word boundary could interact with prefix literal optimizations and lead to a false positive match. ### [`v1.8.0`](https://github.com/rust-lang/regex/blob/HEAD/CHANGELOG.md#​180-2023-04-20) \================== This is a sizeable release that will be soon followed by another sizeable release. Both of them will combined close over 40 existing issues and PRs. This first release, despite its size, essentially represents preparatory work for the second release, which will be even bigger. Namely, this release: - Increases the MSRV to Rust 1.60.0, which was released about 1 year ago. - Upgrades its dependency on `aho-corasick` to the recently released 1.0 version. - Upgrades its dependency on `regex-syntax` to the simultaneously released `0.7` version. The changes to `regex-syntax` principally revolve around a rewrite of its literal extraction code and a number of simplifications and optimizations to its high-level intermediate representation (HIR). The second release, which will follow ~shortly after the release above, will contain a soup-to-nuts rewrite of every regex engine. This will be done by bringing [`regex-automata`](https://github.com/BurntSushi/regex-automata) into this repository, and then changing the `regex` crate to be nothing but an API shim layer on top of `regex-automata`'s API. These tandem releases are the culmination of about 3 years of on-and-off work that [began in earnest in March 2020](rust-lang/regex#656). Because of the scale of changes involved in these releases, I would love to hear about your experience. Especially if you notice undocumented changes in behavior or performance changes (positive *or* negative). Most changes in the first release are listed below. For more details, please see the commit log, which reflects a linear and decently documented history of all changes. New features: - [FEATURE #​501](rust-lang/regex#501): Permit many more characters to be escaped, even if they have no significance. More specifically, any ASCII character except for `[0-9A-Za-z<>]` can now be escaped. Also, a new routine, `is_escapeable_character`, has been added to `regex-syntax` to query whether a character is escapeable or not. - [FEATURE #​547](rust-lang/regex#547): Add `Regex::captures_at`. This filles a hole in the API, but doesn't otherwise introduce any new expressive power. - [FEATURE #​595](rust-lang/regex#595): Capture group names are now Unicode-aware. They can now begin with either a `_` or any "alphabetic" codepoint. After the first codepoint, subsequent codepoints can be any sequence of alpha-numeric codepoints, along with `_`, `.`, `[` and `]`. Note that replacement syntax has not changed. - [FEATURE #​810](rust-lang/regex#810): Add `Match::is_empty` and `Match::len` APIs. - [FEATURE #​905](rust-lang/regex#905): Add an `impl Default for RegexSet`, with the default being the empty set. - [FEATURE #​908](rust-lang/regex#908): A new method, `Regex::static_captures_len`, has been added which returns the number of capture groups in the pattern if and only if every possible match always contains the same number of matching groups. - [FEATURE #​955](rust-lang/regex#955): Named captures can now be written as `(?<name>re)` in addition to `(?P<name>re)`. - FEATURE: `regex-syntax` now supports empty character classes. - FEATURE: `regex-syntax` now has an optional `std` feature. (This will come to `regex` in the second release.) - FEATURE: The `Hir` type in `regex-syntax` has had a number of simplifications made to it. - FEATURE: `regex-syntax` has support for a new `R` flag for enabling CRLF mode. This will be supported in `regex` proper in the second release. - FEATURE: `regex-syntax` now has proper support for "regex that never matches" via `Hir::fail()`. - FEATURE: The `hir::literal` module of `regex-syntax` has been completely re-worked. It now has more documentation, examples and advice. - FEATURE: The `allow_invalid_utf8` option in `regex-syntax` has been renamed to `utf8`, and the meaning of the boolean has been flipped. Performance improvements: - PERF: The upgrade to `aho-corasick 1.0` may improve performance in some cases. It's difficult to characterize exactly which patterns this might impact, but if there are a small number of longish (>= 4 bytes) prefix literals, then it might be faster than before. Bug fixes: - [BUG #​514](rust-lang/regex#514): Improve `Debug` impl for `Match` so that it doesn't show the entire haystack. - BUGS [#​516](rust-lang/regex#516), [#​731](rust-lang/regex#731): Fix a number of issues with printing `Hir` values as regex patterns. - [BUG #​610](rust-lang/regex#610): Add explicit example of `foo|bar` in the regex syntax docs. - [BUG #​625](rust-lang/regex#625): Clarify that `SetMatches::len` does not (regretably) refer to the number of matches in the set. - [BUG #​660](rust-lang/regex#660): Clarify "verbose mode" in regex syntax documentation. - BUG [#​738](rust-lang/regex#738), [#​950](rust-lang/regex#950): Fix `CaptureLocations::get` so that it never panics. - [BUG #​747](rust-lang/regex#747): Clarify documentation for `Regex::shortest_match`. - [BUG #​835](rust-lang/regex#835): Fix `\p{Sc}` so that it is equivalent to `\p{Currency_Symbol}`. - [BUG #​846](rust-lang/regex#846): Add more clarifying documentation to the `CompiledTooBig` error variant. - [BUG #​854](rust-lang/regex#854): Clarify that `regex::Regex` searches as if the haystack is a sequence of Unicode scalar values. - [BUG #​884](rust-lang/regex#884): Replace `__Nonexhaustive` variants with `#[non_exhaustive]` attribute. - [BUG #​893](rust-lang/regex#893): Optimize case folding since it can get quite slow in some pathological cases. - [BUG #​895](rust-lang/regex#895): Reject `(?-u:\W)` in `regex::Regex` APIs. - [BUG #​942](rust-lang/regex#942): Add a missing `void` keyword to indicate "no parameters" in C API. - [BUG #​965](rust-lang/regex#965): Fix `\p{Lc}` so that it is equivalent to `\p{Cased_Letter}`. - [BUG #​975](rust-lang/regex#975): Clarify documentation for `\pX` syntax. </details> --- ### Configuration 📅 **Schedule**: Branch creation - At any time (no schedule defined), Automerge - At any time (no schedule defined). 🚦 **Automerge**: Disabled by config. Please merge this manually once you are satisfied. ♻ **Rebasing**: Whenever PR becomes conflicted, or you tick the rebase/retry checkbox. 🔕 **Ignore**: Close this PR and you won't be reminded about this update again. --- - [ ] <!-- rebase-check -->If you want to rebase/retry this PR, check this box --- This PR has been generated by [Renovate Bot](https://github.com/renovatebot/renovate). <!--renovate-debug:eyJjcmVhdGVkSW5WZXIiOiIzNS42MS4wIiwidXBkYXRlZEluVmVyIjoiMzUuNjYuMyIsInRhcmdldEJyYW5jaCI6ImRldmVsb3AifQ==--> Co-authored-by: cabr2-bot <cabr2.help@gmail.com> Co-authored-by: crapStone <crapstone01@gmail.com> Reviewed-on: https://codeberg.org/Calciumdibromid/CaBr2/pulls/1874 Reviewed-by: crapStone <crapstone@noreply.codeberg.org> Co-authored-by: Calciumdibromid Bot <cabr2_bot@noreply.codeberg.org> Co-committed-by: Calciumdibromid Bot <cabr2_bot@noreply.codeberg.org>
The document explains
SetMatches::len()
as “the total number of regexes in the set that created these matches”.At first sight, I thought
SetMatches
as a collection of matched regular expression indices, so naturally, I expect the following function to always returntrue
:But it seems that this method always returns the number of all regular expressions in the corresponding
RegexSet
object, not the number of matched regular expressions.I think the name of
len()
strongly suggests that it is consistent with the behavior ofiter()
, maybe it’s better to rename this method or add a better explanation to reduce confusion.The text was updated successfully, but these errors were encountered: