My Arduino, ATTiny85, ESP8266/32 and RPi (Raspberry Pi) projects
Reference information:
- ATTiny85
- ESP8266
- esp-wroom
- GPIO-pi3: pin diagram for RPi3.
- i2c: Arduino and RPi3 master, ATTiny85 slave
- i2s
- spi
- IDE : general setup, particularly about ATTiny85 setup.
- sketch_feb05a : RTC clock + zeroseg (0seg) to create a digital clock
- debounce a button
- picocom
- Twiddle-factor FFT for mcus
- 0clock: clock made with nano, 0seg, and tiny RTC.
- abaclock: clock made with a RTC clock and an Arduino LED backpack
- alacrity: pills reminder and warnings raised by alarm
- alarm: raises a panic call to alacrity
- atlast: a Forth for mcus based on Walker's Forth
- blinky85: directory containing code for blinking an ATTiny85 from RPi - consider it a baseline for making projects using C++, and not the IDE
- blinkt.
- clockesp IN PROGRESS
- dev01: meditation timer
- dev02: projects for the DEV02 home-made board: green_red and mhz85
dev04: Programming an ATTiny85 from the Pi- dev05: ATTiny85 programmer for the Pi
- dev06: 8x8, nano
- minitone85: working version of tone() for ATtiny85
- mins30-85: 30 minute timer for ATTiny85, programmable from the Pi (
DEV01
). - pills: remember to take your pills
- synth: sound synthesizer/tone-maker
- sleep85: conserving power by putting the ATTiny85 to sleep
- Enclosures 10pcs 75 x 54 x 27mm DIY Plastic Project Housing Electronic Junction Case Power Supply Box
- Mini USB nano. Amazon also has good deals on these
- ZeroSeg
1306 I2C, WROOM
SPI
I2C
Stereo Audio Jack. G=GND, L=Left speaker, R=Right speaker, 1=unknown, 2=unknown. Underside shown.
I2C