Mount for Big Tree Tech PI TFT 5 Inch for the Voron 2.4, using 2.2 mount. Along with the screen you'll need a longer ribbon cable, as the screen comes with a 2" cable since it's designed to be used with the Raspberry Pi attached to the back.
Special thanks to OrkusMG for doing most of the work on this, I just modified it for use with a different screen.
Link to his original project
Required Materials:
12x M3x12 SHCS
2x M5x10 BHCS
4x Heatset Inserts
1x BTT PI TFT 5 inch
1x Extended Ribbon Cable
Step 1:
Step 2:
Step 3:
Step 4: Sorry I don't have images for these later parts, I screenshotted the previous one from the 2.2 manual. Insert 4 heatset inserts into front cover. Insert screen. Connect ribbon cable to screen.
Step 5: Route ribbon cable through one of the holes in the back. 4 M3x12 SHCS go into back to connect to front cover. Do not overtighten! Connect ribbon cable to display port on Raspberry Pi.
Step 6: 4 M3x12 SHCS connect screen case to mount.
Step 7: Install KlipperScreen.
Step 8: ???
Step 9: Profit.
