You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
I uploaded the alternative gateware for the 10 RX slices with SparkSDR and Quisk.
Both give the same result when trying to run a receiver in SparkSDR.
On all frequencies, in all bands the same spectrum and white noise only.
Gain stays on 100 rbfs in MAX and OFF modes.
Roll back to main.rbf works and back to 4 RX slices is working.
What else can I try to get to a working 10 RX slice Hermes Lite V2 ?
In the SparkSDR error log I can see that in the programming step the Erase always fails and I also see that Main is a little bigger than Cicrx. Will this non erase issue leave wrong bits in the system?
The text was updated successfully, but these errors were encountered:
Hi,
Can we move this to the Google group?
hermeslite.com
Are you running with RX bandwidth of 192kHz? To fit 10 receivers, we have
to simplify things and run at 192kHz with only CIC filtering, so only ~40%
of the bandwidth is usable.
73,
Steve
kf7o
On Sun, Jul 4, 2021 at 2:30 PM waterwin ***@***.***> wrote:
I uploaded the alternative gateware for the 10 RX slices with SparkSDR and
Quisk.
Both give the same result when trying to run a receiver in SparkSDR.
On all frequencies, in all bands the same spectrum and white noise only.
Gain stays on 100 rbfs in MAX and OFF modes.
Roll back to main.rbf works and back to 4 RX slices is working.
What else can I try to get to a working 10 RX slice Hermes Lite V2 ?
—
You are receiving this because you are subscribed to this thread.
Reply to this email directly, view it on GitHub
<#159>, or
unsubscribe
<https://github.com/notifications/unsubscribe-auth/ABO4THIDEJDULBCECTJBC23TWDHGJANCNFSM47ZSAYUA>
.
Thanks for your quick reaction Steve,
I tried all bandwidth possibilities.
The issue is there when starting 1 receiver, or 2, or 3 ..... or 10
I'll copy the info to the group and do a second try today with Quisk as well
I uploaded the alternative gateware for the 10 RX slices with SparkSDR and Quisk.
Both give the same result when trying to run a receiver in SparkSDR.
On all frequencies, in all bands the same spectrum and white noise only.
Gain stays on 100 rbfs in MAX and OFF modes.
Roll back to main.rbf works and back to 4 RX slices is working.
What else can I try to get to a working 10 RX slice Hermes Lite V2 ?
In the SparkSDR error log I can see that in the programming step the Erase always fails and I also see that Main is a little bigger than Cicrx. Will this non erase issue leave wrong bits in the system?
The text was updated successfully, but these errors were encountered: