See CANBus Triple for more information, or to purchase hardware.
This repository contains Shell M. Shrader's modifications to the base CBT firmware and libraries for the CANBus Triple to support Genesis Connect, an Android based LCD replacement for Hyundai Genesis Coupes.
The complementary Android client software can be found here: https://github.com/synman/GenesisConnect
This code is tested with Arduino 1.6.1. Download and install the appropriate file for your platform.
Clone this repo / download to your Arduino Sketchbook/hardware folder. The path should look like this
Documents/Arduino/hardware/CANBus-Triple
To clone:
git clone https://github.com/synman/CANBus-Triple_Genesis-Connect.git
Or download the zip and extract it to your sketchbook folder.
Launch the Arduino IDE and select the newly available board variant from the menu bar under Tools > Board > CANBus Triple
Open the base sketch by selecting File > Sketchbook > hardware > CANBus-Triple > avr > CANBusTriple
This is the basic sketch that talks to the CAN Controllers MCP2515, reads CAN packets from them, and routes them through the Middleware system.
Assure your CANBus Triple is connected to your PC via the supplied USB cable. Then select the appropriate port from Tools > Ports. It will probably say Arduino Leonardo beside the correct port.
Press the Build and Upload button:
The IDE will compile and upload to the CANBus Triple.
If you simply want to flash the newest firmware build you can use AVRDude or XLoader for windows to flash the appropriate .hex file to your device. The built firmware files are found in the builds folder of the repo.
Example AVRDude command:
avrdude -Cavrdude.conf -v -patmega32u4 -cavr109 -P/dev/cu.usbmodem1411 -b57600 -D -Uflash:w:CANBusTriple.cpp.hex:i
I use CoolTerm. It is free software available for Linux, MacOS, and Windows. Use the terminal software of your choice.
Connect to your CBT Serial port and you're ready to send commands.
- Send 0x0101 to get general device information.
- Send 0x011001 to get CAN Bus 1 information.
- Send 0x011002 to get CAN Bus 2 information.
- Send 0x011003 to get CAN Bus 3 information.
See the docs for available commands.
A hybrid web app for Android, iOS, Windows, and MacOS is in development and will be available soon.
Head to the documentation site for more in depth information.
Make sure to sign up at the forum for support and to engage with the community!