Support for ESP-S3-12K

[MrReSc]

I am currently trying to add support for the ESP-S3-12K from AI-Thinker.

If I now change the board in the build environment [env:generic] to board = esp32-s3-devkitc-1, then all is compiled without errors and OpenDTU runs without problems on the ESP.

[platformio]
default_envs = generic

[env:generic]
board = esp32-s3-devkitc-1

But if I now add a new build environment [env:esp32-s3-devkitc-1] with the same board and also switch the build environment in VScode, then I get the following errors.

[platformio]
default_envs = esp32-s3-devkitc-1

[env:generic]
board = esp32dev

[env:esp32-s3-devkitc-1]
board = esp32-s3-devkitc-1

Processing esp32-s3-devkitc-1 (board: esp32-s3-devkitc-1; framework: arduino; platform: espressif32@>=5.2.0)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Verbose mode can be enabled via `-v, --verbose` option
Firmware Revision: gfe16a92
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/esp32-s3-devkitc-1.html
PLATFORM: Espressif 32 (5.2.0) > Espressif ESP32-S3-DevKitC-1-N8 (8 MB QD, No PSRAM)
HARDWARE: ESP32S3 240MHz, 320KB RAM, 8MB Flash
DEBUG: Current (esp-builtin) On-board (esp-builtin) External (cmsis-dap, esp-bridge, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES: 
 - framework-arduinoespressif32 @ 3.20005.220925 (2.0.5) 
 - tool-esptoolpy @ 1.40201.0 (4.2.1) 
 - tool-openocd-esp32 @ 2.1100.20220706 (11.0) 
 - toolchain-riscv32-esp @ 8.4.0+2021r2-patch3 
 - toolchain-xtensa-esp32s3 @ 8.4.0+2021r2-patch3
LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
LDF Modes: Finder ~ chain, Compatibility ~ soft
Found 42 compatible libraries
Scanning dependencies...
Dependency Graph
|-- ESP Async WebServer @ 1.2.3+sha.1dde9cf
|   |-- AsyncTCP @ 1.1.1
|   |-- ArduinoJson @ 6.19.4
|   |-- FS @ 2.0.0
|   |-- WiFi @ 2.0.0
|-- ArduinoJson @ 6.19.4
|-- espMqttClient @ 1.3.3+sha.6a3f3a8
|   |-- AsyncTCP @ 1.1.1
|   |-- WiFiClientSecure @ 2.0.0
|   |   |-- WiFi @ 2.0.0
|   |-- WiFi @ 2.0.0
|-- RF24 @ 1.4.5
|   |-- SPI @ 2.0.0
|-- LittleFS @ 2.0.0
|   |-- FS @ 2.0.0
|-- Hoymiles @ 0.0.1
|   |-- RF24 @ 1.4.5
|   |   |-- SPI @ 2.0.0
|   |-- Every
|   |-- SPI @ 2.0.0
|   |-- CircularBuffer
|   |-- TimeoutHelper
|-- Ticker @ 2.0.0
|-- Ethernet @ 2.0.0
|   |-- WiFi @ 2.0.0
|-- WiFi @ 2.0.0
|-- Update @ 2.0.0
|-- ResetReason
|-- DNSServer @ 2.0.0
|   |-- WiFi @ 2.0.0
Building in release mode
Converting .pio/build/esp32-s3-devkitc-1/index.html.gz.txt.o
Converting .pio/build/esp32-s3-devkitc-1/zones.json.gz.txt.o
Converting .pio/build/esp32-s3-devkitc-1/favicon.ico.txt.o
Converting .pio/build/esp32-s3-devkitc-1/app.js.gz.txt.o
Compiling .pio/build/esp32-s3-devkitc-1/src/Configuration.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/MqttHassPublishing.cpp.o
Compiling .pio/build/esp32-s3-devkitc-1/src/MqttPublishing.cpp.o
Compiling .pio/build/esp32-s3-devkitc-1/src/MqttSettings.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/NetworkSettings.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/NtpSettings.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/Utils.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi.cpp.o
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi_config.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi_devinfo.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi_dtu.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi_eventlog.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi_firmware.cpp.o
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi_inverter.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi_limit.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
Compiling .pio/build/esp32-s3-devkitc-1/src/WebApi_maintenance.cpp.o
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
<command-line>: error: ISO C++11 requires whitespace after the macro name [-Werror]
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/NtpSettings.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/Utils.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/MqttPublishing.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/NetworkSettings.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/Configuration.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/MqttSettings.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi_firmware.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi_devinfo.cpp.o] Error 1
cc1plus: all warnings being treated as errors
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/MqttHassPublishing.cpp.o] Error 1
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi_eventlog.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi_maintenance.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi_dtu.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi_config.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi_limit.cpp.o] Error 1
cc1plus: all warnings being treated as errors
*** [.pio/build/esp32-s3-devkitc-1/src/WebApi_inverter.cpp.o] Error 1
===================================================================== [FAILED] Took 6.14 seconds =====================================================================

Environment         Status    Duration
------------------  --------  ------------
esp32-s3-devkitc-1  FAILED    00:00:06.139
=============================================================== 1 failed, 0 succeeded in 00:00:06.139 ===============================================================

[MrReSc]

The hyphen in the build environment name was not allowed! It works now. But I still need to test the pinout.