Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

[PW_SID:894432] [v1,1/2] Bluetooth: btintel_pcie: Add handshake between driver and firmware #1898

Closed
wants to merge 16 commits into from
Closed

[PW_SID:894432] [v1,1/2] Bluetooth: btintel_pcie: Add handshake between driver and firmware #1898

wants to merge 16 commits into from

Conversation

tedd-an
Copy link
Owner

@tedd-an tedd-an commented Oct 1, 2024

The following handshake mechanism needs be followed after firmware
download is completed to bring the firmware to running state.

After firmware fragments of Operational image are downloaded and
secure sends result of the image succeeds,

  1. Driver sends HCI Intel reset with boot option [PW_SID:358591] Bluetooth: Add new MGMT interface for advertising add  #1 to switch FW image.
  2. FW sends Alive GP[0] MSIx
  3. Driver enables data path (doorbell 0x460 for RBDs, etc...)
  4. Driver gets Bootup event from firmware
  5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0)
  6. FW sends Alive GP[0] MSIx
  7. Device host interface is fully set for BT protocol stack operation.
  8. Driver may optionally get debug event with ID 0x97 which can be dropped

For Intermediate loadger image, all the above steps are applicable
expcept #5 and #6.

On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait
for it before passing control over to bluetooth stack.

Co-developed-by: Devegowda Chandrashekar chandrashekar.devegowda@intel.com
Signed-off-by: Devegowda Chandrashekar chandrashekar.devegowda@intel.com
Signed-off-by: Kiran K kiran.k@intel.com

drivers/bluetooth/btintel.c | 56 ++++++-
drivers/bluetooth/btintel.h | 7 +
drivers/bluetooth/btintel_pcie.c | 262 ++++++++++++++++++++++++++++++-
drivers/bluetooth/btintel_pcie.h | 16 +-
4 files changed, 329 insertions(+), 12 deletions(-)

Vudentz and others added 16 commits September 13, 2024 12:49
@Vudentz
Bluetooth: MGMT: Fix possible crash on mgmt_index_removed
eb3ad76 
If mgmt_index_removed is called while there are commands queued on
cmd_sync it could lead to crashes like the bellow trace:

0x0000053D: __list_del_entry_valid_or_report+0x98/0xdc
0x0000053D: mgmt_pending_remove+0x18/0x58 [bluetooth]
0x0000053E: mgmt_remove_adv_monitor_complete+0x80/0x108 [bluetooth]
0x0000053E: hci_cmd_sync_work+0xbc/0x164 [bluetooth]

So while handling mgmt_index_removed this attempts to dequeue
commands passed as user_data to cmd_sync.

Fixes: 7cf5c29 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Reported-by: jiaymao <quic_jiaymao@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@ChrisCH-Lu @Vudentz
Bluetooth: btusb: mediatek: move Bluetooth power off command position
65e9c1b 
Move MediaTek Bluetooth power off command before releasing
usb ISO interface.

Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@ChrisCH-Lu @Vudentz
Bluetooth: btusb: mediatek: add callback function in btusb_disconnect
bcfc09e 
Add disconnect callback function in btusb_disconnect which is reserved
for vendor specific usage before deregister hci in btusb_disconnect.

Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@ChrisCH-Lu @Vudentz
Bluetooth: btusb: mediatek: add intf release flow when usb disconnect
6f3f7e9 
MediaTek claim an special usb intr interface for ISO data transmission.
The interface need to be released before unregistering hci device when
usb disconnect. Removing BT usb dongle without properly releasing the
interface may cause Kernel panic while unregister hci device.

Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@ChrisCH-Lu @Vudentz
Bluetooth: btusb: mediatek: change the conditions for ISO interface
667e802 
Change conditions for Bluetooth driver claiming and releasing usb
ISO interface for MediaTek ISO data transmission.

Signed-off-by: Chris Lu <chris.lu@mediatek.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@Vudentz
Bluetooth: L2CAP: Fix uaf in l2cap_connect
d93544b 
[Syzbot reported]
BUG: KASAN: slab-use-after-free in l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
Read of size 8 at addr ffff8880241e9800 by task kworker/u9:0/54

CPU: 0 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-00268-g788220eee30d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024
Workqueue: hci2 hci_rx_work
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:93 [inline]
 dump_stack_lvl+0x116/0x1f0 lib/dump_stack.c:119
 print_address_description mm/kasan/report.c:377 [inline]
 print_report+0xc3/0x620 mm/kasan/report.c:488
 kasan_report+0xd9/0x110 mm/kasan/report.c:601
 l2cap_connect.constprop.0+0x10d8/0x1270 net/bluetooth/l2cap_core.c:3949
 l2cap_connect_req net/bluetooth/l2cap_core.c:4080 [inline]
 l2cap_bredr_sig_cmd net/bluetooth/l2cap_core.c:4772 [inline]
 l2cap_sig_channel net/bluetooth/l2cap_core.c:5543 [inline]
 l2cap_recv_frame+0xf0b/0x8eb0 net/bluetooth/l2cap_core.c:6825
 l2cap_recv_acldata+0x9b4/0xb70 net/bluetooth/l2cap_core.c:7514
 hci_acldata_packet net/bluetooth/hci_core.c:3791 [inline]
 hci_rx_work+0xaab/0x1610 net/bluetooth/hci_core.c:4028
 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
 process_scheduled_works kernel/workqueue.c:3312 [inline]
 worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389
 kthread+0x2c1/0x3a0 kernel/kthread.c:389
 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244
...

Freed by task 5245:
 kasan_save_stack+0x33/0x60 mm/kasan/common.c:47
 kasan_save_track+0x14/0x30 mm/kasan/common.c:68
 kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:579
 poison_slab_object+0xf7/0x160 mm/kasan/common.c:240
 __kasan_slab_free+0x32/0x50 mm/kasan/common.c:256
 kasan_slab_free include/linux/kasan.h:184 [inline]
 slab_free_hook mm/slub.c:2256 [inline]
 slab_free mm/slub.c:4477 [inline]
 kfree+0x12a/0x3b0 mm/slub.c:4598
 l2cap_conn_free net/bluetooth/l2cap_core.c:1810 [inline]
 kref_put include/linux/kref.h:65 [inline]
 l2cap_conn_put net/bluetooth/l2cap_core.c:1822 [inline]
 l2cap_conn_del+0x59d/0x730 net/bluetooth/l2cap_core.c:1802
 l2cap_connect_cfm+0x9e6/0xf80 net/bluetooth/l2cap_core.c:7241
 hci_connect_cfm include/net/bluetooth/hci_core.h:1960 [inline]
 hci_conn_failed+0x1c3/0x370 net/bluetooth/hci_conn.c:1265
 hci_abort_conn_sync+0x75a/0xb50 net/bluetooth/hci_sync.c:5583
 abort_conn_sync+0x197/0x360 net/bluetooth/hci_conn.c:2917
 hci_cmd_sync_work+0x1a4/0x410 net/bluetooth/hci_sync.c:328
 process_one_work+0x9c5/0x1b40 kernel/workqueue.c:3231
 process_scheduled_works kernel/workqueue.c:3312 [inline]
 worker_thread+0x6c8/0xed0 kernel/workqueue.c:3389
 kthread+0x2c1/0x3a0 kernel/kthread.c:389
 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147
 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244

Reported-by: syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com
Tested-by: syzbot+c12e2f941af1feb5632c@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=c12e2f941af1feb5632c
Fixes: 7b064ed ("Bluetooth: Fix authentication if acl data comes before remote feature evt")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@Vudentz
Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()
f9c212d 
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable when request IRQ.

Fixes: bb7f4f0 ("btmrvl: add platform specific wakeup interrupt support")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@pyma1 @Vudentz
Bluetooth: btusb: add Foxconn 0xe0fc for Qualcomm WCN785x
47d72bf 
Firmwares are already in upstream.

kernel boot log as following:
Bluetooth: hci0: using rampatch file: qca/rampatch_usb_00190200.bin
Bluetooth: hci0: QCA: patch rome 0x190200 build 0x5656, firmware rome 0x190200 build 0x43fb
Bluetooth: hci0: using NVM file: qca/nvm_usb_00190200.bin

Paired BT headphone, output is good.

T:  Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0fc Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by: Aaron Ma <aaron.ma@canonical.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@zijun-hu @Vudentz
Bluetooth: btusb: Add one more ID 0x0489:0xe0f3 for Qualcomm WCN785x
8e4ce1b 
Add one more part with ID (0x0489, 0xe0f3) to usb_device_id table for
Qualcomm WCN785x, and its device info from /sys/kernel/debug/usb/devices
is shown below:

T:  Bus=01 Lev=01 Prnt=01 Port=13 Cnt=03 Dev#=  4 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=0489 ProdID=e0f3 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@Vudentz
Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE
370e38c 
This aligned BR/EDR JUST_WORKS method with LE which since 92516cd
("Bluetooth: Always request for user confirmation for Just Works")
always request user confirmation with confirm_hint set since the
likes of bluetoothd have dedicated policy around JUST_WORKS method
(e.g. main.conf:JustWorksRepairing).

CVE: CVE-2024-8805
Cc: stable@vger.kernel.org
Fixes: ba15a58 ("Bluetooth: Fix SSP acceptor just-works confirmation without MITM")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Tested-by: Kiran K <kiran.k@intel.com>
@zijun-hu @Vudentz
Bluetooth: btusb: Add one more ID 0x13d3:0x3623 for Qualcomm WCN785x
6abb078 
Add one more part with ID (0x13d3, 0x3623) to usb_device_id table for
Qualcomm WCN785x, and its device info from /sys/kernel/debug/usb/devices
is shown below:

T:  Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#=  2 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=13d3 ProdID=3623 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms
I:  If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  63 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  63 Ivl=1ms
I:  If#= 1 Alt= 7 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  65 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  65 Ivl=1ms

Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@Vudentz
Bluetooth: btnxpuart: Drop _v0 suffix from FW names
fa5c74f 
This updates all FW names by dropping the _v0 suffix.
Its been decided that all NXP BT/ WiFi FW names won't support _v0 suffix.
The suffix would be kept for next HW versions such as v1, v2 and so on,
which do not have backward compatible FW.

This change affects W8987, IW416 and IW615 chipsets, out of which new FW
files for W8987 and IW615 are yet to be released to broad market.

For IW416, old and new FW names are added to maintain backward
compatibility for existing customers.

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@Vudentz
Bluetooth: btnxpuart: Rename IW615 to IW610
cc34f7a 
This changes the chip name of IW615 to IW610.

IW610 (formerly called IW615) is yet to be released to broad market,
hence there is no issue of backward compatibility.

Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
@tedd-an
workflow: Add workflow files for ci
944bd4d 
This patch adds workflow files for ci:

[schedule_work.yml]
 - The workflow file for scheduled work
 - Sync the repo with upstream repo and rebase the workflow branch
 - Review the patches in the patchwork and creates the PR if needed

[ci.yml]
 - The workflow file for CI tasks
 - Run CI tests when PR is created
@kirankrishnappa-intel @tedd-an
Bluetooth: btintel_pcie: Add handshake between driver and firmware
b20bc92 
The following handshake mechanism needs be followed after firmware
download is completed to bring the firmware to running state.

After firmware fragments of Operational image are downloaded and
secure sends result of the image succeeds,

1. Driver sends HCI Intel reset with boot option #1 to switch FW image.
2. FW sends Alive GP[0] MSIx
3. Driver enables data path (doorbell 0x460 for RBDs, etc...)
4. Driver gets Bootup event from firmware
5. Driver performs D0 entry to device (WRITE to IPC_Sleep_Control =0x0)
6. FW sends Alive GP[0] MSIx
7. Device host interface is fully set for BT protocol stack operation.
8. Driver may optionally get debug event with ID 0x97 which can be dropped

For Intermediate loadger image, all the above steps are applicable
expcept #5 and #6.

On HCI_OP_RESET, firmware raises alive interrupt. Driver needs to wait
for it before passing control over to bluetooth stack.

Co-developed-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: Devegowda Chandrashekar <chandrashekar.devegowda@intel.com>
Signed-off-by: Kiran K <kiran.k@intel.com>
@kirankrishnappa-intel @tedd-an
Bluetooth: btintel_pcie: Add recovery mechanism
47c904f 
This patch adds a recovery mechanism to recover controller if firmware
download fails due to unresponsive controller, command timeout, firmware
signature verification failure etc. Driver attmepts maximum of 5 times
before giving up.

Signed-off-by: Kiran K <kiran.k@intel.com>
@github-actions github-actions bot force-pushed the workflow branch 7 times, most recently from dc8fe50 to 041b34c Compare October 8, 2024 14:25
@github-actions github-actions bot force-pushed the workflow branch 7 times, most recently from 87c8a11 to 0c85bce Compare October 16, 2024 20:25
@github-actions github-actions bot force-pushed the workflow branch 5 times, most recently from d15f420 to ca93168 Compare October 23, 2024 14:24
@github-actions github-actions bot force-pushed the workflow branch 2 times, most recently from 287172f to 4dbf1a3 Compare October 30, 2024 19:02
@tedd-an tedd-an closed this Oct 31, 2024
@tedd-an tedd-an deleted the 894432 branch October 31, 2024 11:13
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
6 participants
@tedd-an @Vudentz @ChrisCH-Lu @pyma1 @zijun-hu @kirankrishnappa-intel