[PW_SID:363021] None #9

github-actions · 2020-10-31T04:33:34Z

A new flag BTUSB_INTEL_NEWGEN has been defined for new generation Intel
controllers. Map Typhoon peak Intel controller to BTUSB_INTEL_NEWGEN

Signed-off-by: Kiran K kiran.k@intel.com

WCN3991 supports connectable advertisements so we need to add the valid le states quirk so the 'central-peripheral' role is exposed in userspace. Signed-off-by: Abhishek Pandit-Subedi <abhishekpandit@chromium.org> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

AMP_MGR is getting derefernced in hci_phy_link_complete_evt(), when called from hci_event_packet() and there is a possibility, that hcon->amp_mgr may not be found when accessing after initialization of hcon. - net/bluetooth/hci_event.c:4945 The bug seems to get triggered in this line: bredr_hcon = hcon->amp_mgr->l2cap_conn->hcon; Fix it by adding a NULL check for the hcon->amp_mgr before checking the ev-status. Fixes: d5e9119 ("Bluetooth: AMP: Process Physical Link Complete evt") Reported-and-tested-by: syzbot+0bef568258653cff272f@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=0bef568258653cff272f Signed-off-by: Anmol Karn <anmol.karan123@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

When h5_close() gets called, the memory allocated for the hu gets freed only if hu->serdev doesn't exist. This leads to a memory leak. So when h5_close() is requested, close the serdev device instance and free the memory allocated to the hu entirely instead. Fixes: https://syzkaller.appspot.com/bug?extid=6ce141c55b2f7aafd1c4 Reported-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Tested-by: syzbot+6ce141c55b2f7aafd1c4@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

This patch adds workflow files for ci: [schedule_work.yml] - The workflow file for scheduled work - Sync the repo with upstream repo and rebase the workflow branch - Review the patches in the patchwork and creates the PR if needed [ci.yml] - TBD

A new flag BTUSB_INTEL_NEWGEN has been defined for new generation Intel controllers. Map Typhoon peak Intel controller to BTUSB_INTEL_NEWGEN Signed-off-by: Kiran K <kiran.k@intel.com>

A different wait queue was used when removing ctrl_wait than when adding it. This effectively made the remove operation without locking compared to other operations on the wait queue ctrl_wait was part of. This caused issues like below where dead000000000100 is LIST_POISON1 and dead000000000200 is LIST_POISON2. list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \ but was dead000000000200. (next=ffffffc03ac77de0). ------------[ cut here ]------------ CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9 ... ---[ end trace 0adc2158f0646eac ]--- Call trace: [<ffffffc000443f78>] __list_add+0x38/0xb0 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68 [<ffffffc00020eecc>] __pollwait+0xec/0x100 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128 [<ffffffc000210378>] do_sys_poll+0x220/0x480 [<ffffffc0002106f0>] SyS_poll+0x80/0x138 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4 Unable to handle kernel paging request at virtual address dead000000000100 ... CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9 ... Call trace: [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8 [<ffffffc0000f0818>] __wake_up+0x50/0x70 [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60 [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224 [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298 [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198 [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78 [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30 [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360 [<ffffffc0000c2218>] process_one_work+0x268/0x460 [<ffffffc0000c2678>] worker_thread+0x268/0x480 [<ffffffc0000c94e0>] kthread+0x118/0x128 [<ffffffc000085070>] ret_from_fork+0x10/0x20 ---[ end trace 0adc2158f0646ead ]--- Signed-off-by: Ole Bjørn Midtbø <omidtbo@cisco.com>

A different wait queue was used when removing ctrl_wait than when adding it. This effectively made the remove operation without locking compared to other operations on the wait queue ctrl_wait was part of. This caused issues like below where dead000000000100 is LIST_POISON1 and dead000000000200 is LIST_POISON2. list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \ but was dead000000000200. (next=ffffffc03ac77de0). ------------[ cut here ]------------ CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9 ... ---[ end trace 0adc2158f0646eac ]--- Call trace: [<ffffffc000443f78>] __list_add+0x38/0xb0 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68 [<ffffffc00020eecc>] __pollwait+0xec/0x100 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128 [<ffffffc000210378>] do_sys_poll+0x220/0x480 [<ffffffc0002106f0>] SyS_poll+0x80/0x138 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4 Unable to handle kernel paging request at virtual address dead000000000100 ... CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9 ... Call trace: [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8 [<ffffffc0000f0818>] __wake_up+0x50/0x70 [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60 [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224 [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298 [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198 [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78 [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30 [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360 [<ffffffc0000c2218>] process_one_work+0x268/0x460 [<ffffffc0000c2678>] worker_thread+0x268/0x480 [<ffffffc0000c94e0>] kthread+0x118/0x128 [<ffffffc000085070>] ret_from_fork+0x10/0x20 ---[ end trace 0adc2158f0646ead ]--- Signed-off-by: Ole Bjørn Midtbø <omidtbo@cisco.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb4 ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie <michael.christie@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Amit Cohen says: ==================== Extend VXLAN driver to support FDB flushing The merge commit 9271686 ("Merge branch 'br-flush-filtering'") added support for FDB flushing in bridge driver. Extend VXLAN driver to support FDB flushing also. Add support for filtering by fields which are relevant for VXLAN FDBs: * Source VNI * Nexthop ID * 'router' flag * Destination VNI * Destination Port * Destination IP Without this set, flush for VXLAN device fails: $ bridge fdb flush dev vx10 RTNETLINK answers: Operation not supported With this set, such flush works with the relevant arguments, for example: $ bridge fdb flush dev vx10 vni 5000 dst 193.2.2.1 < flush all vx10 entries with VNI 5000 and destination IP 193.2.2.1> Some preparations are required, handle them before adding flushing support in VXLAN driver. See more details in commit messages. Patch set overview: Patch #1 prepares flush policy to be used by VXLAN driver Patches #2-#3 are preparations in VXLAN driver Patch #4 adds an initial support for flushing in VXLAN driver Patches #5-#9 add support for filtering by several attributes Patch #10 adds a test for FDB flush with VXLAN Patch #11 extends the test to check FDB flush with bridge ==================== Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== mlxsw: Move allocation of LAG table to the driver PGT is an in-HW table that maps addresses to sets of ports. Then when some HW process needs a set of ports as an argument, instead of embedding the actual set in the dynamic configuration, what gets configured is the address referencing the set. The HW then works with the appropriate PGT entry. Within the PGT is placed a LAG table. That is a contiguous block of PGT memory where each entry describes which ports are members of the corresponding LAG port. The PGT is split to two parts: one managed by the FW, and one managed by the driver. Historically, the FW part included also the LAG table, referred to as FW LAG mode. Giving the responsibility for placement of the LAG table to the driver, referred to as SW LAG mode, makes the whole system more flexible. The FW currently supports both FW and SW LAG modes. To shed complexity, the FW should in the future only support SW LAG mode. Hence this patchset, where support for placement of LAG is added to mlxsw. There are FW versions out there that do not support SW LAG mode, and on Spectrum-1 in particular, there is no plan to support it at all. mlxsw will therefore have to support both modes of operation. Another aspect is that at least on Spectrum-1, there are FW versions out there that claim to support driver-placed LAG table, but then reject or ignore configurations enabling the same. The driver thus has to have a say in whether an attempt to configure SW LAG mode should even be done. The feature is therefore expressed in terms of "does the driver prefer SW LAG mode?", and "what LAG mode the PCI module managed to configure the FW with". This is unlike current flood mode configuration, where the driver can give a strict value, and that's what gets configured. But it gives a chance to the driver to determine whether LAG mode should be enabled at all. The "does the driver prefer SW LAG mode?" bit is expressed as a boolean lag_mode_prefer_sw. The reason for this is largely another feature that will be introduced in a follow-up patchset: support for CFF flood mode. The driver currently requires that the FW be configured with what is called controlled flood mode. But on capable systems, CFF would be preferred. So there are two values in flight: the preferred flood mode, and the fallback. This could be expressed with an array of flood modes ordered by preference, but that looks like an overkill in comparison. This flag/value model is then reused for LAG mode as well, except the fallback value is absent and implied to be FW, because there are no other values to choose from. The patchset progresses as follows: - Patches #1 to #5 adjust reg.h and cmd.h with new register fields, constants and remarks. - Patches #6 and #7 add the ability to request SW LAG mode and to query the LAG mode that was actually negotiated. This is where the abovementioned lag_mode_prefer_sw flag is added. - Patches #7 to #9 generalize PGT allocations to make it possible to allocate the LAG table, which is done in patch #10. - In patch #11, toggle lag_mode_prefer_sw on Spectrum-2 and above, which makes the newly-added code live. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…gister-spills' Andrii Nakryiko says: ==================== Complete BPF verifier precision tracking support for register spills Add support to BPF verifier to track and support register spill/fill to/from stack regardless if it was done through read-only R10 register (which is the only form supported today), or through a general register after copying R10 into it, while also potentially modifying offset. Once we add register this generic spill/fill support to precision backtracking, we can take advantage of it to stop doing eager STACK_ZERO conversion on register spill. Instead we can rely on (im)precision of spilled const zero register to improve verifier state pruning efficiency. This situation of using const zero register to initialize stack slots is very common with __builtin_memset() usage or just zero-initializing variables on the stack, and it causes unnecessary state duplication, as that STACK_ZERO knowledge is often not necessary for correctness, as those zero values are never used in precise context. Thus, relying on register imprecision helps tremendously, especially in real-world BPF programs. To make spilled const zero register behave completely equivalently to STACK_ZERO, we need to improve few other small pieces, which is done in the second part of the patch set. See individual patches for details. There are also two small bug fixes spotted during STACK_ZERO debugging. The patch set consists of logically three changes: - patch #1 (and corresponding tests in patch #2) is fixing/impoving precision propagation for stack spills/fills. This can be landed as a stand-alone improvement; - patches #3 through #9 is improving verification scalability by utilizing register (im)precision instead of eager STACK_ZERO. These changes depend on patch #1. - patch #10 is a memory efficiency improvement to how instruction/jump history is tracked and maintained. It depends on patch #1, but is not strictly speaking required, even though I believe it's a good long-term solution to have a path-dependent per-instruction information. Kind of like a path-dependent counterpart to path-agnostic insn_aux array. v3->v3: - fixed up Fixes tag (Alexei); - fixed few more selftests to not use BPF_ST instruction in inline asm directly, checked with CI, it was happy (CI); v2->v3: - BPF_ST instruction workaround (Eduard); - force dereference in added tests to catch problems (Eduard); - some commit message massaging (Alexei); v1->v2: - clean ups, WARN_ONCE(), insn_flags helpers added (Eduard); - added more selftests for STACK_ZERO/STACK_MISC cases (Eduard); - a bit more detailed explanation of effect of avoiding STACK_ZERO in favor of register spill in patch #8 commit (Alexei); - global shared instruction history refactoring moved to be the last patch in the series to make it easier to revert it, if applied (Alexei). ==================== Link: https://lore.kernel.org/r/20231205184248.1502704-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Before the change on `i686-linux` `systemd` build failed as: $ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22) After the change it fails as: $ bpftool gen object src/core/bpf/socket_bind/socket-bind.bpf.o src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o libbpf: ELF section #9 has inconsistent alignment addr=8 != d=4 in src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o Error: failed to link 'src/core/bpf/socket_bind/socket-bind.bpf.unstripped.o': Invalid argument (22) Now it's slightly easier to figure out what is wrong with an ELF file. Signed-off-by: Sergei Trofimovich <slyich@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Eduard Zingerman <eddyz87@gmail.com> Link: https://lore.kernel.org/bpf/20231208215100.435876-1-slyich@gmail.com

Andrii Nakryiko says: ==================== BPF token support in libbpf's BPF object Add fuller support for BPF token in high-level BPF object APIs. This is the most frequently used way to work with BPF using libbpf, so supporting BPF token there is critical. Patch #1 is improving kernel-side BPF_TOKEN_CREATE behavior by rejecting to create "empty" BPF token with no delegation. This seems like saner behavior which also makes libbpf's caching better overall. If we ever want to create BPF token with no delegate_xxx options set on BPF FS, we can use a new flag to enable that. Patches #2-#5 refactor libbpf internals, mostly feature detection code, to prepare it from BPF token FD. Patch #6 adds options to pass BPF token into BPF object open options. It also adds implicit BPF token creation logic to BPF object load step, even without any explicit involvement of the user. If the environment is setup properly, BPF token will be created transparently and used implicitly. This allows for all existing application to gain BPF token support by just linking with latest version of libbpf library. No source code modifications are required. All that under assumption that privileged container management agent properly set up default BPF FS instance at /sys/bpf/fs to allow BPF token creation. Patches #7-#8 adds more selftests, validating BPF object APIs work as expected under unprivileged user namespaced conditions in the presence of BPF token. Patch #9 extends libbpf with LIBBPF_BPF_TOKEN_PATH envvar knowledge, which can be used to override custom BPF FS location used for implicit BPF token creation logic without needing to adjust application code. This allows admins or container managers to mount BPF token-enabled BPF FS at non-standard location without the need to coordinate with applications. LIBBPF_BPF_TOKEN_PATH can also be used to disable BPF token implicit creation by setting it to an empty value. Patch #10 tests this new envvar functionality. v2->v3: - move some stray feature cache refactorings into patch #4 (Alexei); - add LIBBPF_BPF_TOKEN_PATH envvar support (Alexei); v1->v2: - remove minor code redundancies (Eduard, John); - add acks and rebase. ==================== Link: https://lore.kernel.org/r/20231213190842.3844987-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Jiri Pirko says: ==================== devlink: introduce notifications filtering From: Jiri Pirko <jiri@nvidia.com> Currently the user listening on a socket for devlink notifications gets always all messages for all existing devlink instances and objects, even if he is interested only in one of those. That may cause unnecessary overhead on setups with thousands of instances present. User is currently able to narrow down the devlink objects replies to dump commands by specifying select attributes. Allow similar approach for notifications providing user a new notify-filter-set command to select attributes with values the notification message has to match. In that case, it is delivered to the socket. Note that the filtering is done per-socket, so multiple users may specify different selection of attributes with values. This patchset initially introduces support for following attributes: DEVLINK_ATTR_BUS_NAME DEVLINK_ATTR_DEV_NAME DEVLINK_ATTR_PORT_INDEX Patches #1 - #4 are preparations in devlink code, patch #3 is an optimization done on the way. Patches #5 - #7 are preparations in netlink and generic netlink code. Patch #8 is the main one in this set implementing of the notify-filter-set command and the actual per-socket filtering. Patch #9 extends the infrastructure allowing to filter according to a port index. Example: $ devlink mon port pci/0000:08:00.0/32768 [port,new] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth netdev eth3 flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth netdev eth3 flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type eth flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,new] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable [port,del] pci/0000:08:00.0/32768: type notset flavour pcisf controller 0 pfnum 0 sfnum 107 splittable false function: hw_addr 00:00:00:00:00:00 state inactive opstate detached roce enable ==================== Link: https://lore.kernel.org/r/20231216123001.1293639-1-jiri@resnulli.us Signed-off-by: Paolo Abeni <pabeni@redhat.com>

@smb

Validate @smb->WordCount to avoid reading off the end of @smb and thus causing the following KASAN splat: BUG: KASAN: slab-out-of-bounds in smbCalcSize+0x32/0x40 [cifs] Read of size 2 at addr ffff88801c024ec5 by task cifsd/1328 CPU: 1 PID: 1328 Comm: cifsd Not tainted 6.7.0-rc5 #9 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x4a/0x80 print_report+0xcf/0x650 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __phys_addr+0x46/0x90 kasan_report+0xd8/0x110 ? smbCalcSize+0x32/0x40 [cifs] ? smbCalcSize+0x32/0x40 [cifs] kasan_check_range+0x105/0x1b0 smbCalcSize+0x32/0x40 [cifs] checkSMB+0x162/0x370 [cifs] ? __pfx_checkSMB+0x10/0x10 [cifs] cifs_handle_standard+0xbc/0x2f0 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 cifs_demultiplex_thread+0xed1/0x1360 [cifs] ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] ? srso_alias_return_thunk+0x5/0xfbef5 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? __pfx_lock_release+0x10/0x10 ? srso_alias_return_thunk+0x5/0xfbef5 ? mark_held_locks+0x1a/0x90 ? lockdep_hardirqs_on_prepare+0x136/0x210 ? srso_alias_return_thunk+0x5/0xfbef5 ? srso_alias_return_thunk+0x5/0xfbef5 ? __kthread_parkme+0xce/0xf0 ? __pfx_cifs_demultiplex_thread+0x10/0x10 [cifs] kthread+0x18d/0x1d0 ? kthread+0xdb/0x1d0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x34/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> This fixes CVE-2023-6606. Reported-by: j51569436@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218218 Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com> Signed-off-by: Steve French <stfrench@microsoft.com>

Ido Schimmel says: ==================== Add MDB bulk deletion support This patchset adds MDB bulk deletion support, allowing user space to request the deletion of matching entries instead of dumping the entire MDB and issuing a separate deletion request for each matching entry. Support is added in both the bridge and VXLAN drivers in a similar fashion to the existing FDB bulk deletion support. The parameters according to which bulk deletion can be performed are similar to the FDB ones, namely: Destination port, VLAN ID, state (e.g., "permanent"), routing protocol, source / destination VNI, destination IP and UDP port. Flushing based on flags (e.g., "offload", "fast_leave", "added_by_star_ex", "blocked") is not currently supported, but can be added in the future, if a use case arises. Patch #1 adds a new uAPI attribute to allow specifying the state mask according to which bulk deletion will be performed, if any. Patch #2 adds a new policy according to which bulk deletion requests (with 'NLM_F_BULK' flag set) will be parsed. Patches #3-#4 add a new NDO for MDB bulk deletion and invoke it from the rtnetlink code when a bulk deletion request is made. Patches #5-#6 implement the MDB bulk deletion NDO in the bridge and VXLAN drivers, respectively. Patch #7 allows user space to issue MDB bulk deletion requests by no longer rejecting the 'NLM_F_BULK' flag when it is set in 'RTM_DELMDB' requests. Patches #8-#9 add selftests for both drivers, for both good and bad flows. iproute2 changes can be found here [1]. https://github.com/idosch/iproute2/tree/submit/mdb_flush_v1 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Andrii Nakryiko says: ==================== Enhance BPF global subprogs with argument tags This patch set adds verifier support for annotating user's global BPF subprog arguments with few commonly requested annotations, to improve global subprog verification experience. These tags are: - ability to annotate a special PTR_TO_CTX argument; - ability to annotate a generic PTR_TO_MEM as non-null. We utilize btf_decl_tag attribute for this and provide two helper macros as part of bpf_helpers.h in libbpf (patch #8). Besides this we also add abilit to pass a pointer to dynptr into global subprog. This is done based on type name match (struct bpf_dynptr *). This allows to pass dynptrs into global subprogs, for use cases that deal with variable-sized generic memory pointers. Big chunk of the patch set (patches #1 through #5) are various refactorings to make verifier internals around global subprog validation logic easier to extend and support long term, eliminating BTF parsing logic duplication, factoring out argument expectation definitions from BTF parsing, etc. New functionality is added in patch #6 (ctx and non-null) and patch #7 (dynptr), extending global subprog checks with awareness for arg tags. Patch #9 adds simple tests validating each of the added tags and dynptr argument passing. Patch #10 adds a simple negative case for freplace programs to make sure that target BPF programs with "unreliable" BTF func proto cannot be freplaced. v2->v3: - patch #10 improved by checking expected verifier error (Eduard); v1->v2: - dropped packet args for now (Eduard); - added back unreliable=true detection for entry BPF programs (Eduard); - improved subprog arg validation (Eduard); - switched dynptr arg from tag to just type name based check (Eduard). ==================== Link: https://lore.kernel.org/r/20231215011334.2307144-1-andrii@kernel.org Signed-off-by: Alexei Starovoitov <ast@kernel.org>

An issue occurred while reading an ELF file in libbpf.c during fuzzing: Program received signal SIGSEGV, Segmentation fault. 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 4206 in libbpf.c (gdb) bt #0 0x0000000000958e97 in bpf_object.collect_prog_relos () at libbpf.c:4206 #1 0x000000000094f9d6 in bpf_object.collect_relos () at libbpf.c:6706 #2 0x000000000092bef3 in bpf_object_open () at libbpf.c:7437 #3 0x000000000092c046 in bpf_object.open_mem () at libbpf.c:7497 #4 0x0000000000924afa in LLVMFuzzerTestOneInput () at fuzz/bpf-object-fuzzer.c:16 #5 0x000000000060be11 in testblitz_engine::fuzzer::Fuzzer::run_one () #6 0x000000000087ad92 in tracing::span::Span::in_scope () #7 0x00000000006078aa in testblitz_engine::fuzzer::util::walkdir () #8 0x00000000005f3217 in testblitz_engine::entrypoint::main::{{closure}} () #9 0x00000000005f2601 in main () (gdb) scn_data was null at this code(tools/lib/bpf/src/libbpf.c): if (rel->r_offset % BPF_INSN_SZ || rel->r_offset >= scn_data->d_size) { The scn_data is derived from the code above: scn = elf_sec_by_idx(obj, sec_idx); scn_data = elf_sec_data(obj, scn); relo_sec_name = elf_sec_str(obj, shdr->sh_name); sec_name = elf_sec_name(obj, scn); if (!relo_sec_name || !sec_name)// don't check whether scn_data is NULL return -EINVAL; In certain special scenarios, such as reading a malformed ELF file, it is possible that scn_data may be a null pointer Signed-off-by: Mingyi Zhang <zhangmingyi5@huawei.com> Signed-off-by: Xin Liu <liuxin350@huawei.com> Signed-off-by: Changye Wu <wuchangye@huawei.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20231221033947.154564-1-liuxin350@huawei.com

Wen Gu says: ==================== net/smc: implement SMCv2.1 virtual ISM device support The fourth edition of SMCv2 adds the SMC version 2.1 feature updates for SMC-Dv2 with virtual ISM. Virtual ISM are created and supported mainly by OS or hypervisor software, comparable to IBM ISM which is based on platform firmware or hardware. With the introduction of virtual ISM, SMCv2.1 makes some updates: - Introduce feature bitmask to indicate supplemental features. - Reserve a range of CHIDs for virtual ISM. - Support extended GIDs (128 bits) in CLC handshake. So this patch set aims to implement these updates in Linux kernel. And it acts as the first part of SMC-D virtual ISM extension & loopback-ism [1]. [1] https://lore.kernel.org/netdev/1695568613-125057-1-git-send-email-guwen@linux.alibaba.com/ v8->v7: - Patch #7: v7 mistakenly changed the type of gid_ext in smc_clc_msg_accept_confirm to u64 instead of __be64 as previous versions when fixing the rebase conflicts. So fix this mistake. v7->v6: Link: https://lore.kernel.org/netdev/20231219084536.8158-1-guwen@linux.alibaba.com/ - Collect the Reviewed-by tag in v6; - Patch #3: redefine the struct smc_clc_msg_accept_confirm; - Patch #7: Because that the Patch #3 already adds '__packed' to smc_clc_msg_accept_confirm, so Patch #7 doesn't need to do the same thing. But this is a minor change, so I kept the 'Reviewed-by' tag. Other changes in previous versions but not yet acked: - Patch #1: Some minor changes in subject and fix the format issue (length exceeds 80 columns) compared to v3. - Patch #5: removes useless ini->feature_mask assignment in __smc_connect() and smc_listen_v2_check() compared to v4. - Patch #8: new added, compared to v3. v6->v5: Link: https://lore.kernel.org/netdev/1702371151-125258-1-git-send-email-guwen@linux.alibaba.com/ - Add 'Reviewed-by' label given in the previous versions: * Patch #4, #6, #9, #10 have nothing changed since v3; - Patch #2: * fix the format issue (Alignment should match open parenthesis) compared to v5; * remove useless clc->hdr.length assignment in smcr_clc_prep_confirm_accept() compared to v5; - Patch #3: new added compared to v5. - Patch #7: some minor changes like aclc_v2->aclc or clc_v2->clc compared to v5 due to the introduction of Patch #3. Since there were no major changes, I kept the 'Reviewed-by' label. Other changes in previous versions but not yet acked: - Patch #1: Some minor changes in subject and fix the format issue (length exceeds 80 columns) compared to v3. - Patch #5: removes useless ini->feature_mask assignment in __smc_connect() and smc_listen_v2_check() compared to v4. - Patch #8: new added, compared to v3. v5->v4: Link: https://lore.kernel.org/netdev/1702021259-41504-1-git-send-email-guwen@linux.alibaba.com/ - Patch #6: improve the comment of SMCD_CLC_MAX_V2_GID_ENTRIES; - Patch #4: remove useless ini->feature_mask assignment; v4->v3: https://lore.kernel.org/netdev/1701920994-73705-1-git-send-email-guwen@linux.alibaba.com/ - Patch #6: use SMCD_CLC_MAX_V2_GID_ENTRIES to indicate the max gid entries in CLC proposal and using SMC_MAX_V2_ISM_DEVS to indicate the max devices to propose; - Patch #6: use i and i+1 in smc_find_ism_v2_device_serv(); - Patch #2: replace the large if-else block in smc_clc_send_confirm_accept() with 2 subfunctions; - Fix missing byte order conversion of GID and token in CLC handshake, which is in a separate patch sending to net: https://lore.kernel.org/netdev/1701882157-87956-1-git-send-email-guwen@linux.alibaba.com/ - Patch #7: add extended GID in SMC-D lgr netlink attribute; v3->v2: https://lore.kernel.org/netdev/1701343695-122657-1-git-send-email-guwen@linux.alibaba.com/ - Rename smc_clc_fill_fce as smc_clc_fill_fce_v2x; - Remove ISM_IDENT_MASK from drivers/s390/net/ism.h; - Add explicitly assigning 'false' to ism_v2_capable in ism_dev_init(); - Remove smc_ism_set_v2_capable() helper for now, and introduce it in later loopback-ism implementation; v2->v1: - Fix sparse complaint; - Rebase to the latest net-next; ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

Petr Machata says: ==================== selftests: Fixes for kernel CI As discussed on the bi-weekly call on Jan 30, and in mailing around kernel CI effort, some changes are desirable in the suite of forwarding selftests the better to work with the CI tooling. Namely: - The forwarding selftests use a configuration file where names of interfaces are defined and various variables can be overridden. There is also forwarding.config.sample that users can use as a template to refer to when creating the config file. What happens a fair bit is that users either do not know about this at all, or simply forget, and are confused by cryptic failures about interfaces that cannot be created. In patches #1 - #3 have lib.sh just be the single source of truth with regards to which variables exist. That includes the topology variables which were previously only in the sample file, and any "tweak variables", such as what tools to use, sleep times, etc. forwarding.config.sample then becomes just a placeholder with a couple examples. Unless specific HW should be exercised, or specific tools used, the defaults are usually just fine. - Several net/forwarding/ selftests (and one net/ one) cannot be run on veth pairs, they need an actual HW interface to run on. They are generic in the sense that any capable HW should pass them, which is why they have been put to net/forwarding/ as opposed to drivers/net/, but they do not generalize to veth. The fact that these tests are in net/forwarding/, but still complaining when run, is confusing. In patches #4 - #6 move these tests to a new directory drivers/net/hw. - The following patches extend the codebase to handle well test results other than pass and fail. Patch #7 is preparatory. It converts several log_test_skip to XFAIL, so that tests do not spuriously end up returning non-0 when they are not supposed to. In patches #8 - #10, introduce some missing ksft constants, then support having those constants in RET, and then finally in EXIT_STATUS. - The traffic scheduler tests generate a large amount of network traffic to test the behavior of the scheduler. This demands a relatively high-performance computer. On slow machines, such as with a debugging kernel, the test would spuriously fail. It can still be useful to "go through the motions" though, to possibly catch bugs in setup of the scheduler graph and passing packets around. Thus we still want to run the tests, just with lowered demands. To that end, in patches #11 - #12, introduce an environment variable KSFT_MACHINE_SLOW, with obvious meaning. Tests can then make checks more lenient, such as mark failures as XFAIL. A helper, xfail_on_slow, is provided to mark performance-sensitive parts of the selftest. - In patch #13, use a similar mechanism to mark a NH group stats selftest to XFAIL HW stats tests when run on VETH pairs. - All these changes complicate the hitherto straightforward logging and checking logic, so in patch #14, add a selftest that checks this functionality in lib.sh. v1 (vs. an RFC circulated through linux-kselftest): - Patch #9: - Clarify intended usage by s/set_ret/ret_set_ksft_status/, s/nret/ksft_status/ ==================== Link: https://lore.kernel.org/r/cover.1711464583.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The driver creates /sys/kernel/debug/dri/0/mob_ttm even when the corresponding ttm_resource_manager is not allocated. This leads to a crash when trying to read from this file. Add a check to create mob_ttm, system_mob_ttm, and gmr_ttm debug file only when the corresponding ttm_resource_manager is allocated. crash> bt PID: 3133409 TASK: ffff8fe4834a5000 CPU: 3 COMMAND: "grep" #0 [ffffb954506b3b20] machine_kexec at ffffffffb2a6bec3 #1 [ffffb954506b3b78] __crash_kexec at ffffffffb2bb598a #2 [ffffb954506b3c38] crash_kexec at ffffffffb2bb68c1 #3 [ffffb954506b3c50] oops_end at ffffffffb2a2a9b1 #4 [ffffb954506b3c70] no_context at ffffffffb2a7e913 #5 [ffffb954506b3cc8] __bad_area_nosemaphore at ffffffffb2a7ec8c #6 [ffffb954506b3d10] do_page_fault at ffffffffb2a7f887 #7 [ffffb954506b3d40] page_fault at ffffffffb360116e [exception RIP: ttm_resource_manager_debug+0x11] RIP: ffffffffc04afd11 RSP: ffffb954506b3df0 RFLAGS: 00010246 RAX: ffff8fe41a6d1200 RBX: 0000000000000000 RCX: 0000000000000940 RDX: 0000000000000000 RSI: ffffffffc04b4338 RDI: 0000000000000000 RBP: ffffb954506b3e08 R8: ffff8fee3ffad000 R9: 0000000000000000 R10: ffff8fe41a76a000 R11: 0000000000000001 R12: 00000000ffffffff R13: 0000000000000001 R14: ffff8fe5bb6f3900 R15: ffff8fe41a6d1200 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ffffb954506b3e00] ttm_resource_manager_show at ffffffffc04afde7 [ttm] #9 [ffffb954506b3e30] seq_read at ffffffffb2d8f9f3 RIP: 00007f4c4eda8985 RSP: 00007ffdbba9e9f8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 000000000037e000 RCX: 00007f4c4eda8985 RDX: 000000000037e000 RSI: 00007f4c41573000 RDI: 0000000000000003 RBP: 000000000037e000 R8: 0000000000000000 R9: 000000000037fe30 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f4c41573000 R13: 0000000000000003 R14: 00007f4c41572010 R15: 0000000000000003 ORIG_RAX: 0000000000000000 CS: 0033 SS: 002b Signed-off-by: Jocelyn Falempe <jfalempe@redhat.com> Fixes: af4a25b ("drm/vmwgfx: Add debugfs entries for various ttm resource managers") Cc: <stable@vger.kernel.org> Reviewed-by: Zack Rusin <zack.rusin@broadcom.com> Link: https://patchwork.freedesktop.org/patch/msgid/20240312093551.196609-1-jfalempe@redhat.com

vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 #1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 #2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e #3 [fffffe00003fced0] do_nmi at ffffffff8922660d #4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffa655314979e8] io_serial_in at ffffffff89792594 #6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 #7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 #8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 #9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 #10 [ffffa65531497ac8] console_unlock at ffffffff89316124 #11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 #12 [ffffa65531497b68] printk at ffffffff89318306 #13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 #14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] #15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] #16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] #17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] #18 [ffffa65531497f10] kthread at ffffffff892d2e72 #19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Wen Gu says: ==================== net/smc: SMC intra-OS shortcut with loopback-ism This patch set acts as the second part of the new version of [1] (The first part can be referred from [2]), the updated things of this version are listed at the end. - Background SMC-D is now used in IBM z with ISM function to optimize network interconnect for intra-CPC communications. Inspired by this, we try to make SMC-D available on the non-s390 architecture through a software-implemented Emulated-ISM device, that is the loopback-ism device here, to accelerate inter-process or inter-containers communication within the same OS instance. - Design This patch set includes 3 parts: - Patch #1: some prepare work for loopback-ism. - Patch #2-#7: implement loopback-ism device and adapt SMC-D for it. loopback-ism now serves only SMC and no userspace interfaces exposed. - Patch #8-#11: memory copy optimization for intra-OS scenario. The loopback-ism device is designed as an ISMv2 device and not be limited to a specific net namespace, ends of both inter-process connection (1/1' in diagram below) or inter-container connection (2/2' in diagram below) can find the same available loopback-ism and choose it during the CLC handshake. Container 1 (ns1) Container 2 (ns2) +-----------------------------------------+ +-------------------------+ | +-------+ +-------+ +-------+ | | +-------+ | | | App A | | App B | | App C | | | | App D |<-+ | | +-------+ +---^---+ +-------+ | | +-------+ |(2') | | |127.0.0.1 (1')| |192.168.0.11 192.168.0.12| | | (1)| +--------+ | +--------+ |(2) | | +--------+ +--------+ | | `-->| lo |-` | eth0 |<-` | | | lo | | eth0 | | +---------+--|---^-+---+-----|--+---------+ +-+--------+---+-^------+-+ | | | | Kernel | | | | +----+-------v---+-----------v----------------------------------+---+----+ | | TCP | | | | | | | +--------------------------------------------------------------+ | | | | +--------------+ | | | smc loopback | | +---------------------------+--------------+-----------------------------+ loopback-ism device creates DMBs (shared memory) for each connection peer. Since data transfer occurs within the same kernel, the sndbuf of each peer is only a descriptor and point to the same memory region as peer DMB, so that the data copy from sndbuf to peer DMB can be avoided in loopback-ism case. Container 1 (ns1) Container 2 (ns2) +-----------------------------------------+ +-------------------------+ | +-------+ | | +-------+ | | | App C |-----+ | | | App D | | | +-------+ | | | +-^-----+ | | | | | | | | (2) | | | (2') | | | | | | | | +---------------|-------------------------+ +----------|--------------+ | | Kernel | | +---------------|-----------------------------------------|--------------+ | +--------+ +--v-----+ +--------+ +--------+ | | |dmb_desc| |snd_desc| |dmb_desc| |snd_desc| | | +-----|--+ +--|-----+ +-----|--+ +--------+ | | +-----|--+ | +-----|--+ | | | DMB C | +---------------------------------| DMB D | | | +--------+ +--------+ | | | | +--------------+ | | | smc loopback | | +---------------------------+--------------+-----------------------------+ - Benchmark Test * Test environments: - VM with Intel Xeon Platinum 8 core 2.50GHz, 16 GiB mem. - SMC sndbuf/DMB size 1MB. * Test object: - TCP: run on TCP loopback. - SMC lo: run on SMC loopback-ism. 1. ipc-benchmark (see [3]) - ./<foo> -c 1000000 -s 100 TCP SMC-lo Message rate (msg/s) 84991 151293(+78.01%) 2. sockperf - serv: <smc_run> sockperf sr --tcp - clnt: <smc_run> sockperf { tp | pp } --tcp --msg-size={ 64000 for tp | 14 for pp } -i 127.0.0.1 -t 30 TCP SMC-lo Bandwidth(MBps) 5033.569 7987.732(+58.69%) Latency(us) 5.986 3.398(-43.23%) 3. nginx/wrk - serv: <smc_run> nginx - clnt: <smc_run> wrk -t 8 -c 1000 -d 30 http://127.0.0.1:80 TCP SMC-lo Requests/s 187951.76 267107.90(+42.12%) 4. redis-benchmark - serv: <smc_run> redis-server - clnt: <smc_run> redis-benchmark -h 127.0.0.1 -q -t set,get -n 400000 -c 200 -d 1024 TCP SMC-lo GET(Requests/s) 86132.64 118133.49(+37.15%) SET(Requests/s) 87374.40 122887.86(+40.65%) Change log: v7->v6 - Patch #2: minor: remove unnecessary 'return' of inline smc_loopback_exit(). - Patch #10: minor: directly return 0 instead of 'rc' in smcd_cdc_msg_send(). - all: collect the Reviewed-by tags. v6->RFC v5 Link: https://lore.kernel.org/netdev/20240414040304.54255-1-guwen@linux.alibaba.com/ - Patch #2: make the use of CONFIG_SMC_LO cleaner. - Patch #5: mark some smcd_ops that loopback-ism doesn't support as optional and check for the support when they are called. - Patch #7: keep loopback-ism at the beginning of the SMC-D device list. - Some expression changes in commit logs and comments. RFC v5->RFC v4: Link: https://lore.kernel.org/netdev/20240324135522.108564-1-guwen@linux.alibaba.com/ - Patch #2: minor changes in description of config SMC_LO and comments. - Patch #10: minor changes in comments and if(smc_ism_support_dmb_nocopy()) check in smcd_cdc_msg_send(). - Patch #3: change smc_lo_generate_id() to smc_lo_generate_ids() and SMC_LO_CHID to SMC_LO_RESERVED_CHID. - Patch #5: memcpy while holding the ldev->dmb_ht_lock. - Some expression changes in commit logs. RFC v4->v3: Link: https://lore.kernel.org/netdev/20240317100545.96663-1-guwen@linux.alibaba.com/ - The merge window of v6.9 is open, so post this series as an RFC. - Patch #6: since some information fed back by smc_nl_handle_smcd_dev() dose not apply to Emulated-ISM (including loopback-ism here), loopback-ism is not exposed through smc netlink for the time being. we may refactor this part when smc netlink interface is updated. v3->v2: Link: https://lore.kernel.org/netdev/20240312142743.41406-1-guwen@linux.alibaba.com/ - Patch #11: use tasklet_schedule(&conn->rx_tsklet) instead of smcd_cdc_rx_handler() to avoid possible recursive locking of conn->send_lock and use {read|write}_lock_bh() to acquire dmb_ht_lock. v2->v1: Link: https://lore.kernel.org/netdev/20240307095536.29648-1-guwen@linux.alibaba.com/ - All the patches: changed the term virtual-ISM to Emulated-ISM as defined by SMCv2.1. - Patch #3: optimized the description of SMC_LO config. Avoid exposing loopback-ism to sysfs and remove all the knobs until future definition clear. - Patch #3: try to make lockdep happy by using read_lock_bh() in smc_lo_move_data(). - Patch #6: defaultly use physical contiguous DMB buffers. - Patch #11: defaultly enable DMB no-copy for loopback-ism and free the DMB in unregister_dmb or detach_dmb when dmb_node->refcnt reaches 0, instead of using wait_event to keep waiting in unregister_dmb. v1->RFC: Link: https://lore.kernel.org/netdev/20240111120036.109903-1-guwen@linux.alibaba.com/ - Patch #9: merge rx_bytes and tx_bytes as xfer_bytes statistics: /sys/devices/virtual/smc/loopback-ism/xfer_bytes - Patch #10: add support_dmb_nocopy operation to check if SMC-D device supports merging sndbuf with peer DMB. - Patch #13 & #14: introduce loopback-ism device control of DMB memory type and control of whether to merge sndbuf and DMB. They can be respectively set by: /sys/devices/virtual/smc/loopback-ism/dmb_type /sys/devices/virtual/smc/loopback-ism/dmb_copy The motivation for these two control is that a performance bottleneck was found when using vzalloced DMB and sndbuf is merged with DMB, and there are many CPUs and CONFIG_HARDENED_USERCOPY is set [4]. The bottleneck is caused by the lock contention in vmap_area_lock [5] which is involved in memcpy_from_msg() or memcpy_to_msg(). Currently, Uladzislau Rezki is working on mitigating the vmap lock contention [6]. It has significant effects, but using virtual memory still has additional overhead compared to using physical memory. So this new version provides controls of dmb_type and dmb_copy to suit different scenarios. - Some minor changes and comments improvements. RFC->old version([1]): Link: https://lore.kernel.org/netdev/1702214654-32069-1-git-send-email-guwen@linux.alibaba.com/ - Patch #1: improve the loopback-ism dump, it shows as follows now: # smcd d FID Type PCI-ID PCHID InUse #LGs PNET-ID 0000 0 loopback-ism ffff No 0 - Patch #3: introduce the smc_ism_set_v2_capable() helper and set smc_ism_v2_capable when ISMv2 or virtual ISM is registered, regardless of whether there is already a device in smcd device list. - Patch #3: loopback-ism will be added into /sys/devices/virtual/smc/loopback-ism/. - Patch #8: introduce the runtime switch /sys/devices/virtual/smc/loopback-ism/active to activate or deactivate the loopback-ism. - Patch #9: introduce the statistics of loopback-ism by /sys/devices/virtual/smc/loopback-ism/{{tx|rx}_tytes|dmbs_cnt}. - Some minor changes and comments improvements. [1] https://lore.kernel.org/netdev/1695568613-125057-1-git-send-email-guwen@linux.alibaba.com/ [2] https://lore.kernel.org/netdev/20231219142616.80697-1-guwen@linux.alibaba.com/ [3] https://github.com/goldsborough/ipc-bench [4] https://lore.kernel.org/all/3189e342-c38f-6076-b730-19a6efd732a5@linux.alibaba.com/ [5] https://lore.kernel.org/all/238e63cd-e0e8-4fbf-852f-bc4d5bc35d5a@linux.alibaba.com/ [6] https://lore.kernel.org/all/20240102184633.748113-1-urezki@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240428060738.60843-1-guwen@linux.alibaba.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

…/git/pablo/gtp Pablo neira Ayuso says: ==================== gtp pull request 24-05-07 This v3 includes: - fix for clang uninitialized variable per Jakub. - address Smatch and Coccinelle reports per Simon - remove inline in new IPv6 support per Simon - fix memleaks in netlink control plane per Simon -o- The following patchset contains IPv6 GTP driver support for net-next, this also includes IPv6 over IPv4 and vice-versa: Patch #1 removes a unnecessary stack variable initialization in the socket routine. Patch #2 deals with GTP extension headers. This variable length extension header to decapsulate packets accordingly. Otherwise, packets are dropped when these extension headers are present which breaks interoperation with other non-Linux based GTP implementations. Patch #3 prepares for IPv6 support by moving IPv4 specific fields in PDP context objects to a union. Patch #4 adds IPv6 support while retaining backward compatibility. Three new attributes allows to declare an IPv6 GTP tunnel GTPA_FAMILY, GTPA_PEER_ADDR6 and GTPA_MS_ADDR6 as well as IFLA_GTP_LOCAL6 to declare the IPv6 GTP UDP socket. Up to this patch, only IPv6 outer in IPv6 inner is supported. Patch #5 uses IPv6 address /64 prefix for UE/MS in the inner headers. Unlike IPv4, which provides a 1:1 mapping between UE/MS, IPv6 tunnel encapsulates traffic for /64 address as specified by 3GPP TS. Patch has been split from Patch #4 to highlight this behaviour. Patch #6 passes up IPv6 link-local traffic, such as IPv6 SLAAC, for handling to userspace so they are handled as control packets. Patch #7 prepares to allow for GTP IPv4 over IPv6 and vice-versa by moving IP specific debugging out of the function to build IPv4 and IPv6 GTP packets. Patch #8 generalizes TOS/DSCP handling following similar approach as in the existing iptunnel infrastructure. Patch #9 adds a helper function to build an IPv4 GTP packet in the outer header. Patch #10 adds a helper function to build an IPv6 GTP packet in the outer header. Patch #11 adds support for GTP IPv4-over-IPv6 and vice-versa. Patch #12 allows to use the same TID/TEID (tunnel identifier) for inner IPv4 and IPv6 packets for better UE/MS dual stack integration. This series integrates with the osmocom.org project CI and TTCN-3 test infrastructure (Oliver Smith) as well as the userspace libgtpnl library. Thanks to Harald Welte, Oliver Smith and Pau Espin for reviewing and providing feedback through the osmocom.org redmine platform to make this happen. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…PLES event" This reverts commit 7d1405c. This causes segfaults in some cases, as reported by Milian: ``` sudo /usr/bin/perf record -z --call-graph dwarf -e cycles -e raw_syscalls:sys_enter ls ... [ perf record: Woken up 3 times to write data ] malloc(): invalid next size (unsorted) Aborted ``` Backtrace with GDB + debuginfod: ``` malloc(): invalid next size (unsorted) Thread 1 "perf" received signal SIGABRT, Aborted. __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 Downloading source file /usr/src/debug/glibc/glibc/nptl/pthread_kill.c 44 return INTERNAL_SYSCALL_ERROR_P (ret) ? INTERNAL_SYSCALL_ERRNO (ret) : 0; (gdb) bt #0 __pthread_kill_implementation (threadid=<optimized out>, signo=signo@entry=6, no_tid=no_tid@entry=0) at pthread_kill.c:44 #1 0x00007ffff6ea8eb3 in __pthread_kill_internal (threadid=<optimized out>, signo=6) at pthread_kill.c:78 #2 0x00007ffff6e50a30 in __GI_raise (sig=sig@entry=6) at ../sysdeps/posix/ raise.c:26 #3 0x00007ffff6e384c3 in __GI_abort () at abort.c:79 #4 0x00007ffff6e39354 in __libc_message_impl (fmt=fmt@entry=0x7ffff6fc22ea "%s\n") at ../sysdeps/posix/libc_fatal.c:132 #5 0x00007ffff6eb3085 in malloc_printerr (str=str@entry=0x7ffff6fc5850 "malloc(): invalid next size (unsorted)") at malloc.c:5772 #6 0x00007ffff6eb657c in _int_malloc (av=av@entry=0x7ffff6ff6ac0 <main_arena>, bytes=bytes@entry=368) at malloc.c:4081 #7 0x00007ffff6eb877e in __libc_calloc (n=<optimized out>, elem_size=<optimized out>) at malloc.c:3754 #8 0x000055555569bdb6 in perf_session.do_write_header () #9 0x00005555555a373a in __cmd_record.constprop.0 () #10 0x00005555555a6846 in cmd_record () #11 0x000055555564db7f in run_builtin () #12 0x000055555558ed77 in main () ``` Valgrind memcheck: ``` ==45136== Invalid write of size 8 ==45136== at 0x2B38A5: perf_event__synthesize_id_sample (in /usr/bin/perf) ==45136== by 0x157069: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ==45136== Syscall param write(buf) points to unaddressable byte(s) ==45136== at 0x575953D: __libc_write (write.c:26) ==45136== by 0x575953D: write (write.c:24) ==45136== by 0x35761F: ion (in /usr/bin/perf) ==45136== by 0x357778: writen (in /usr/bin/perf) ==45136== by 0x1548F7: record__write (in /usr/bin/perf) ==45136== by 0x15708A: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== Address 0x6a866a8 is 0 bytes after a block of size 40 alloc'd ==45136== at 0x4849BF3: calloc (vg_replace_malloc.c:1675) ==45136== by 0x3574AB: zalloc (in /usr/bin/perf) ==45136== by 0x1570E0: __cmd_record.constprop.0 (in /usr/bin/perf) ==45136== by 0x15A845: cmd_record (in /usr/bin/perf) ==45136== by 0x201B7E: run_builtin (in /usr/bin/perf) ==45136== by 0x142D76: main (in /usr/bin/perf) ==45136== ----- Closes: https://lore.kernel.org/linux-perf-users/23879991.0LEYPuXRzz@milian-workstation/ Reported-by: Milian Wolff <milian.wolff@kdab.com> Tested-by: Milian Wolff <milian.wolff@kdab.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@kernel.org # 6.8+ Link: https://lore.kernel.org/lkml/Zl9ksOlHJHnKM70p@x1 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We have been seeing crashes on duplicate keys in btrfs_set_item_key_safe(): BTRFS critical (device vdb): slot 4 key (450 108 8192) new key (450 108 8192) ------------[ cut here ]------------ kernel BUG at fs/btrfs/ctree.c:2620! invalid opcode: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3139 Comm: xfs_io Kdump: loaded Not tainted 6.9.0 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-2.fc40 04/01/2014 RIP: 0010:btrfs_set_item_key_safe+0x11f/0x290 [btrfs] With the following stack trace: #0 btrfs_set_item_key_safe (fs/btrfs/ctree.c:2620:4) #1 btrfs_drop_extents (fs/btrfs/file.c:411:4) #2 log_one_extent (fs/btrfs/tree-log.c:4732:9) #3 btrfs_log_changed_extents (fs/btrfs/tree-log.c:4955:9) #4 btrfs_log_inode (fs/btrfs/tree-log.c:6626:9) #5 btrfs_log_inode_parent (fs/btrfs/tree-log.c:7070:8) #6 btrfs_log_dentry_safe (fs/btrfs/tree-log.c:7171:8) #7 btrfs_sync_file (fs/btrfs/file.c:1933:8) #8 vfs_fsync_range (fs/sync.c:188:9) #9 vfs_fsync (fs/sync.c:202:9) #10 do_fsync (fs/sync.c:212:9) #11 __do_sys_fdatasync (fs/sync.c:225:9) #12 __se_sys_fdatasync (fs/sync.c:223:1) #13 __x64_sys_fdatasync (fs/sync.c:223:1) #14 do_syscall_x64 (arch/x86/entry/common.c:52:14) #15 do_syscall_64 (arch/x86/entry/common.c:83:7) #16 entry_SYSCALL_64+0xaf/0x14c (arch/x86/entry/entry_64.S:121) So we're logging a changed extent from fsync, which is splitting an extent in the log tree. But this split part already exists in the tree, triggering the BUG(). This is the state of the log tree at the time of the crash, dumped with drgn (https://github.com/osandov/drgn/blob/main/contrib/btrfs_tree.py) to get more details than btrfs_print_leaf() gives us: >>> print_extent_buffer(prog.crashed_thread().stack_trace()[0]["eb"]) leaf 33439744 level 0 items 72 generation 9 owner 18446744073709551610 leaf 33439744 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da item 0 key (450 INODE_ITEM 0) itemoff 16123 itemsize 160 generation 7 transid 9 size 8192 nbytes 8473563889606862198 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 204 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417704.983333333 (2024-05-22 15:41:44) mtime 1716417704.983333333 (2024-05-22 15:41:44) otime 17592186044416.000000000 (559444-03-08 01:40:16) item 1 key (450 INODE_REF 256) itemoff 16110 itemsize 13 index 195 namelen 3 name: 193 item 2 key (450 XATTR_ITEM 1640047104) itemoff 16073 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 3 key (450 EXTENT_DATA 0) itemoff 16020 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 4096 ram 12288 extent compression 0 (none) item 4 key (450 EXTENT_DATA 4096) itemoff 15967 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 4096 nr 8192 item 5 key (450 EXTENT_DATA 8192) itemoff 15914 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 ... So the real problem happened earlier: notice that items 4 (4k-12k) and 5 (8k-12k) overlap. Both are prealloc extents. Item 4 straddles i_size and item 5 starts at i_size. Here is the state of the filesystem tree at the time of the crash: >>> root = prog.crashed_thread().stack_trace()[2]["inode"].root >>> ret, nodes, slots = btrfs_search_slot(root, BtrfsKey(450, 0, 0)) >>> print_extent_buffer(nodes[0]) leaf 30425088 level 0 items 184 generation 9 owner 5 leaf 30425088 flags 0x100000000000000 fs uuid e5bd3946-400c-4223-8923-190ef1f18677 chunk uuid d58cb17e-6d02-494a-829a-18b7d8a399da ... item 179 key (450 INODE_ITEM 0) itemoff 4907 itemsize 160 generation 7 transid 7 size 4096 nbytes 12288 block group 0 mode 100600 links 1 uid 0 gid 0 rdev 0 sequence 6 flags 0x10(PREALLOC) atime 1716417703.220000000 (2024-05-22 15:41:43) ctime 1716417703.220000000 (2024-05-22 15:41:43) mtime 1716417703.220000000 (2024-05-22 15:41:43) otime 1716417703.220000000 (2024-05-22 15:41:43) item 180 key (450 INODE_REF 256) itemoff 4894 itemsize 13 index 195 namelen 3 name: 193 item 181 key (450 XATTR_ITEM 1640047104) itemoff 4857 itemsize 37 location key (0 UNKNOWN.0 0) type XATTR transid 7 data_len 1 name_len 6 name: user.a data a item 182 key (450 EXTENT_DATA 0) itemoff 4804 itemsize 53 generation 9 type 1 (regular) extent data disk byte 303144960 nr 12288 extent data offset 0 nr 8192 ram 12288 extent compression 0 (none) item 183 key (450 EXTENT_DATA 8192) itemoff 4751 itemsize 53 generation 9 type 2 (prealloc) prealloc data disk byte 303144960 nr 12288 prealloc data offset 8192 nr 4096 Item 5 in the log tree corresponds to item 183 in the filesystem tree, but nothing matches item 4. Furthermore, item 183 is the last item in the leaf. btrfs_log_prealloc_extents() is responsible for logging prealloc extents beyond i_size. It first truncates any previously logged prealloc extents that start beyond i_size. Then, it walks the filesystem tree and copies the prealloc extent items to the log tree. If it hits the end of a leaf, then it calls btrfs_next_leaf(), which unlocks the tree and does another search. However, while the filesystem tree is unlocked, an ordered extent completion may modify the tree. In particular, it may insert an extent item that overlaps with an extent item that was already copied to the log tree. This may manifest in several ways depending on the exact scenario, including an EEXIST error that is silently translated to a full sync, overlapping items in the log tree, or this crash. This particular crash is triggered by the following sequence of events: - Initially, the file has i_size=4k, a regular extent from 0-4k, and a prealloc extent beyond i_size from 4k-12k. The prealloc extent item is the last item in its B-tree leaf. - The file is fsync'd, which copies its inode item and both extent items to the log tree. - An xattr is set on the file, which sets the BTRFS_INODE_COPY_EVERYTHING flag. - The range 4k-8k in the file is written using direct I/O. i_size is extended to 8k, but the ordered extent is still in flight. - The file is fsync'd. Since BTRFS_INODE_COPY_EVERYTHING is set, this calls copy_inode_items_to_log(), which calls btrfs_log_prealloc_extents(). - btrfs_log_prealloc_extents() finds the 4k-12k prealloc extent in the filesystem tree. Since it starts before i_size, it skips it. Since it is the last item in its B-tree leaf, it calls btrfs_next_leaf(). - btrfs_next_leaf() unlocks the path. - The ordered extent completion runs, which converts the 4k-8k part of the prealloc extent to written and inserts the remaining prealloc part from 8k-12k. - btrfs_next_leaf() does a search and finds the new prealloc extent 8k-12k. - btrfs_log_prealloc_extents() copies the 8k-12k prealloc extent into the log tree. Note that it overlaps with the 4k-12k prealloc extent that was copied to the log tree by the first fsync. - fsync calls btrfs_log_changed_extents(), which tries to log the 4k-8k extent that was written. - This tries to drop the range 4k-8k in the log tree, which requires adjusting the start of the 4k-12k prealloc extent in the log tree to 8k. - btrfs_set_item_key_safe() sees that there is already an extent starting at 8k in the log tree and calls BUG(). Fix this by detecting when we're about to insert an overlapping file extent item in the log tree and truncating the part that would overlap. CC: stable@vger.kernel.org # 6.1+ Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>

The code in ocfs2_dio_end_io_write() estimates number of necessary transaction credits using ocfs2_calc_extend_credits(). This however does not take into account that the IO could be arbitrarily large and can contain arbitrary number of extents. Extent tree manipulations do often extend the current transaction but not in all of the cases. For example if we have only single block extents in the tree, ocfs2_mark_extent_written() will end up calling ocfs2_replace_extent_rec() all the time and we will never extend the current transaction and eventually exhaust all the transaction credits if the IO contains many single block extents. Once that happens a WARN_ON(jbd2_handle_buffer_credits(handle) <= 0) is triggered in jbd2_journal_dirty_metadata() and subsequently OCFS2 aborts in response to this error. This was actually triggered by one of our customers on a heavily fragmented OCFS2 filesystem. To fix the issue make sure the transaction always has enough credits for one extent insert before each call of ocfs2_mark_extent_written(). Heming Zhao said: ------ PANIC: "Kernel panic - not syncing: OCFS2: (device dm-1): panic forced after error" PID: xxx TASK: xxxx CPU: 5 COMMAND: "SubmitThread-CA" #0 machine_kexec at ffffffff8c069932 #1 __crash_kexec at ffffffff8c1338fa #2 panic at ffffffff8c1d69b9 #3 ocfs2_handle_error at ffffffffc0c86c0c [ocfs2] #4 __ocfs2_abort at ffffffffc0c88387 [ocfs2] #5 ocfs2_journal_dirty at ffffffffc0c51e98 [ocfs2] #6 ocfs2_split_extent at ffffffffc0c27ea3 [ocfs2] #7 ocfs2_change_extent_flag at ffffffffc0c28053 [ocfs2] #8 ocfs2_mark_extent_written at ffffffffc0c28347 [ocfs2] #9 ocfs2_dio_end_io_write at ffffffffc0c2bef9 [ocfs2] #10 ocfs2_dio_end_io at ffffffffc0c2c0f5 [ocfs2] #11 dio_complete at ffffffff8c2b9fa7 #12 do_blockdev_direct_IO at ffffffff8c2bc09f #13 ocfs2_direct_IO at ffffffffc0c2b653 [ocfs2] #14 generic_file_direct_write at ffffffff8c1dcf14 #15 __generic_file_write_iter at ffffffff8c1dd07b #16 ocfs2_file_write_iter at ffffffffc0c49f1f [ocfs2] #17 aio_write at ffffffff8c2cc72e #18 kmem_cache_alloc at ffffffff8c248dde #19 do_io_submit at ffffffff8c2ccada #20 do_syscall_64 at ffffffff8c004984 #21 entry_SYSCALL_64_after_hwframe at ffffffff8c8000ba Link: https://lkml.kernel.org/r/20240617095543.6971-1-jack@suse.cz Link: https://lkml.kernel.org/r/20240614145243.8837-1-jack@suse.cz Fixes: c15471f ("ocfs2: fix sparse file & data ordering issue in direct io") Signed-off-by: Jan Kara <jack@suse.cz> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Reviewed-by: Heming Zhao <heming.zhao@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Danielle Ratson says: ==================== Add ability to flash modules' firmware CMIS compliant modules such as QSFP-DD might be running a firmware that can be updated in a vendor-neutral way by exchanging messages between the host and the module as described in section 7.2.2 of revision 4.0 of the CMIS standard. According to the CMIS standard, the firmware update process is done using a CDB commands sequence. CDB (Command Data Block Message Communication) reads and writes are performed on memory map pages 9Fh-AFh according to the CMIS standard, section 8.12 of revision 4.0. Add a pair of new ethtool messages that allow: * User space to trigger firmware update of transceiver modules * The kernel to notify user space about the progress of the process The user interface is designed to be asynchronous in order to avoid RTNL being held for too long and to allow several modules to be updated simultaneously. The interface is designed with CMIS compliant modules in mind, but kept generic enough to accommodate future use cases, if these arise. The kernel interface that will implement the firmware update using CDB command will include 2 layers that will be added under ethtool: * The upper layer that will be triggered from the module layer, is cmis_ fw_update. * The lower one is cmis_cdb. In the future there might be more operations to implement using CDB commands. Therefore, the idea is to keep the cmis_cdb interface clean and the cmis_fw_update specific to the cdb commands handling it. The communication between the kernel and the driver will be done using two ethtool operations that enable reading and writing the transceiver module EEPROM. The operation ethtool_ops::get_module_eeprom_by_page, that is already implemented, will be used for reading from the EEPROM the CDB reply, e.g. reading module setting, state, etc. The operation ethtool_ops::set_module_eeprom_by_page, that is added in the current patchset, will be used for writing to the EEPROM the CDB command such as start firmware image, run firmware image, etc. Therefore in order for a driver to implement module flashing, that driver needs to implement the two functions mentioned above. Patchset overview: Patch #1-#2: Implement the EEPROM writing in mlxsw. Patch #3: Define the interface between the kernel and user space. Patch #4: Add ability to notify the flashing firmware progress. Patch #5: Veto operations during flashing. Patch #6: Add extended compliance codes. Patch #7: Add the cdb layer. Patch #8: Add the fw_update layer. Patch #9: Add ability to flash transceiver modules' firmware. v8: Patch #7: * In the ethtool_cmis_wait_for_cond() evaluate the condition once more to decide if the error code should be -ETIMEDOUT or something else. * s/netdev_err/netdev_err_once. v7: Patch #4: * Return -ENOMEM instead of PTR_ERR(attr) on ethnl_module_fw_flash_ntf_put_err(). Patch #9: * Fix Warning for not unlocking the spin_lock in the error flow on module_flash_fw_work_list_add(). * Avoid the fall-through on ethnl_sock_priv_destroy(). v6: * Squash some of the last patch to patch #5 and patch #9. Patch #3: * Add paragraph in .rst file. Patch #4: * Reserve '1' more place on SKB for NUL terminator in the error message string. * Add more prints on error flow, re-write the printing function and add ethnl_module_fw_flash_ntf_put_err(). * Change the communication method so notification will be sent in unicast instead of multicast. * Add new 'struct ethnl_module_fw_flash_ntf_params' that holds the relevant info for unicast communication and use it to send notification to the specific socket. * s/nla_put_u64_64bit/nla_put_uint/ Patch #7: * In ethtool_cmis_cdb_init(), Use 'const' for the 'params' parameter. Patch #8: * Add a list field to struct ethtool_module_fw_flash for module_fw_flash_work_list that will be presented in the next patch. * Move ethtool_cmis_fw_update() cleaning to a new function that will be represented in the next patch. * Move some of the fields in struct ethtool_module_fw_flash to a separate struct, so ethtool_cmis_fw_update() will get only the relevant parameters for it. * Edit the relevant functions to get the relevant params for them. * s/CMIS_MODULE_READY_MAX_DURATION_USEC/CMIS_MODULE_READY_MAX_DURATION_MSEC Patch #9: * Add a paragraph in the commit message. * Rename labels in module_flash_fw_schedule(). * Add info to genl_sk_priv_*() and implement the relevant callbacks, in order to handle properly a scenario of closing the socket from user space before the work item was ended. * Add a list the holds all the ethtool_module_fw_flash struct that corresponds to the in progress work items. * Add a new enum for the socket types. * Use both above to identify a flashing socket, add it to the list and when closing socket affect only the flashing type. * Create a new function that will get the work item instead of ethtool_cmis_fw_update(). * Edit the relevant functions to get the relevant params for them. * The new function will call the old ethtool_cmis_fw_update(), and do the cleaning, so the existence of the list should be completely isolated in module.c. =================== Signed-off-by: David S. Miller <davem@davemloft.net>

Since f663a03 ("bpf, x64: Remove tail call detection"), tail_call_reachable won't be detected in x86 JIT. And, tail_call_reachable is provided by verifier. Therefore, in test_bpf, the tail_call_reachable must be provided in test cases before running. Fix and test: [ 174.828662] test_bpf: #0 Tail call leaf jited:1 170 PASS [ 174.829574] test_bpf: #1 Tail call 2 jited:1 244 PASS [ 174.830363] test_bpf: #2 Tail call 3 jited:1 296 PASS [ 174.830924] test_bpf: #3 Tail call 4 jited:1 719 PASS [ 174.831863] test_bpf: #4 Tail call load/store leaf jited:1 197 PASS [ 174.832240] test_bpf: #5 Tail call load/store jited:1 326 PASS [ 174.832240] test_bpf: #6 Tail call error path, max count reached jited:1 2214 PASS [ 174.835713] test_bpf: #7 Tail call count preserved across function calls jited:1 609751 PASS [ 175.446098] test_bpf: #8 Tail call error path, NULL target jited:1 472 PASS [ 175.447597] test_bpf: #9 Tail call error path, index out of range jited:1 206 PASS [ 175.448833] test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202406251415.c51865bc-oliver.sang@intel.com Fixes: f663a03 ("bpf, x64: Remove tail call detection") Signed-off-by: Leon Hwang <hffilwlqm@gmail.com> Link: https://lore.kernel.org/r/20240625145351.40072-1-hffilwlqm@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Patch series "mm/filemap: Limit page cache size to that supported by xarray", v2. Currently, xarray can't support arbitrary page cache size. More details can be found from the WARN_ON() statement in xas_split_alloc(). In our test whose code is attached below, we hit the WARN_ON() on ARM64 system where the base page size is 64KB and huge page size is 512MB. The issue was reported long time ago and some discussions on it can be found here [1]. [1] https://www.spinics.net/lists/linux-xfs/msg75404.html In order to fix the issue, we need to adjust MAX_PAGECACHE_ORDER to one supported by xarray and avoid PMD-sized page cache if needed. The code changes are suggested by David Hildenbrand. PATCH[1] adjusts MAX_PAGECACHE_ORDER to that supported by xarray PATCH[2-3] avoids PMD-sized page cache in the synchronous readahead path PATCH[4] avoids PMD-sized page cache for shmem files if needed Test program ============ # cat test.c #define _GNU_SOURCE #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <string.h> #include <fcntl.h> #include <errno.h> #include <sys/syscall.h> #include <sys/mman.h> #define TEST_XFS_FILENAME "/tmp/data" #define TEST_SHMEM_FILENAME "/dev/shm/data" #define TEST_MEM_SIZE 0x20000000 int main(int argc, char **argv) { const char *filename; int fd = 0; void *buf = (void *)-1, *p; int pgsize = getpagesize(); int ret; if (pgsize != 0x10000) { fprintf(stderr, "64KB base page size is required\n"); return -EPERM; } system("echo force > /sys/kernel/mm/transparent_hugepage/shmem_enabled"); system("rm -fr /tmp/data"); system("rm -fr /dev/shm/data"); system("echo 1 > /proc/sys/vm/drop_caches"); /* Open xfs or shmem file */ filename = TEST_XFS_FILENAME; if (argc > 1 && !strcmp(argv[1], "shmem")) filename = TEST_SHMEM_FILENAME; fd = open(filename, O_CREAT | O_RDWR | O_TRUNC); if (fd < 0) { fprintf(stderr, "Unable to open <%s>\n", filename); return -EIO; } /* Extend file size */ ret = ftruncate(fd, TEST_MEM_SIZE); if (ret) { fprintf(stderr, "Error %d to ftruncate()\n", ret); goto cleanup; } /* Create VMA */ buf = mmap(NULL, TEST_MEM_SIZE, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (buf == (void *)-1) { fprintf(stderr, "Unable to mmap <%s>\n", filename); goto cleanup; } fprintf(stdout, "mapped buffer at 0x%p\n", buf); ret = madvise(buf, TEST_MEM_SIZE, MADV_HUGEPAGE); if (ret) { fprintf(stderr, "Unable to madvise(MADV_HUGEPAGE)\n"); goto cleanup; } /* Populate VMA */ ret = madvise(buf, TEST_MEM_SIZE, MADV_POPULATE_WRITE); if (ret) { fprintf(stderr, "Error %d to madvise(MADV_POPULATE_WRITE)\n", ret); goto cleanup; } /* Punch the file to enforce xarray split */ ret = fallocate(fd, FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE, TEST_MEM_SIZE - pgsize, pgsize); if (ret) fprintf(stderr, "Error %d to fallocate()\n", ret); cleanup: if (buf != (void *)-1) munmap(buf, TEST_MEM_SIZE); if (fd > 0) close(fd); return 0; } # gcc test.c -o test # cat /proc/1/smaps | grep KernelPageSize | head -n 1 KernelPageSize: 64 kB # ./test shmem : ------------[ cut here ]------------ WARNING: CPU: 17 PID: 5253 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set nf_tables rfkill nfnetlink vfat fat virtio_balloon \ drm fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ virtio_net sha1_ce net_failover failover virtio_console virtio_blk \ dimlib virtio_mmio CPU: 17 PID: 5253 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #12 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff80008a92f5b0 x29: ffff80008a92f5b0 x28: ffff80008a92f610 x27: ffff80008a92f728 x26: 0000000000000cc0 x25: 000000000000000d x24: ffff0000cf00c858 x23: ffff80008a92f610 x22: ffffffdfc0600000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0600000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000018000000000 x15: 3374004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 3374000000000000 x10: 3374e1c0ffff6000 x9 : ffffb463a84c681c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00011c976ce0 x5 : ffffb463aa47e378 x4 : 0000000000000000 x3 : 0000000000000cc0 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 shmem_undo_range+0x2bc/0x6a8 shmem_fallocate+0x134/0x430 vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 This patch (of 4): The largest page cache order can be HPAGE_PMD_ORDER (13) on ARM64 with 64KB base page size. The xarray entry with this order can't be split as the following error messages indicate. ------------[ cut here ]------------ WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \ fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ sha1_ce virtio_net net_failover virtio_console virtio_blk failover \ dimlib virtio_mmio CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff800087a4f6c0 x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858 x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000 x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28 x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8 x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa0 xfs_flush_unmap_range+0x70/0x90 [xfs] xfs_file_fallocate+0xfc/0x4d8 [xfs] vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by decreasing MAX_PAGECACHE_ORDER to the largest supported order by xarray. For this specific case, MAX_PAGECACHE_ORDER is dropped from 13 to 11 when CONFIG_BASE_SMALL is disabled. Link: https://lkml.kernel.org/r/20240627003953.1262512-1-gshan@redhat.com Link: https://lkml.kernel.org/r/20240627003953.1262512-2-gshan@redhat.com Fixes: 793917d ("mm/readahead: Add large folio readahead") Signed-off-by: Gavin Shan <gshan@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Zhenyu Zhang <zhenyzha@redhat.com> Cc: <stable@vger.kernel.org> [5.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

On ARM64, HPAGE_PMD_ORDER is 13 when the base page size is 64KB. The PMD-sized page cache can't be supported by xarray as the following error messages indicate. ------------[ cut here ]------------ WARNING: CPU: 35 PID: 7484 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 nft_fib \ nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject nft_ct \ nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm \ fuse xfs libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 \ sha1_ce virtio_net net_failover virtio_console virtio_blk failover \ dimlib virtio_mmio CPU: 35 PID: 7484 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff800087a4f6c0 x29: ffff800087a4f6c0 x28: ffff800087a4f720 x27: 000000001fffffff x26: 0000000000000c40 x25: 000000000000000d x24: ffff00010625b858 x23: ffff800087a4f720 x22: ffffffdfc0780000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0780000 x18: 000000001ff40000 x17: 00000000ffffffff x16: 0000018000000000 x15: 51ec004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 51ec000000000000 x10: 51ece1c0ffff8000 x9 : ffffbeb961a44d28 x8 : 0000000000000003 x7 : ffffffdfc0456420 x6 : ffff0000e1aa6eb8 x5 : 20bf08b4fe778fca x4 : ffffffdfc0456420 x3 : 0000000000000c40 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 truncate_inode_pages_range+0x1b4/0x4a8 truncate_pagecache_range+0x84/0xa0 xfs_flush_unmap_range+0x70/0x90 [xfs] xfs_file_fallocate+0xfc/0x4d8 [xfs] vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by skipping to allocate PMD-sized page cache when its size is larger than MAX_PAGECACHE_ORDER. For this specific case, we will fall to regular path where the readahead window is determined by BDI's sysfs file (read_ahead_kb). Link: https://lkml.kernel.org/r/20240627003953.1262512-4-gshan@redhat.com Fixes: 4687fdb ("mm/filemap: Support VM_HUGEPAGE for file mappings") Signed-off-by: Gavin Shan <gshan@redhat.com> Suggested-by: David Hildenbrand <david@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Zhenyu Zhang <zhenyzha@redhat.com> Cc: <stable@vger.kernel.org> [5.18+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

For shmem files, it's possible that PMD-sized page cache can't be supported by xarray. For example, 512MB page cache on ARM64 when the base page size is 64KB can't be supported by xarray. It leads to errors as the following messages indicate when this sort of xarray entry is split. WARNING: CPU: 34 PID: 7578 at lib/xarray.c:1025 xas_split_alloc+0xf8/0x128 Modules linked in: binfmt_misc nft_fib_inet nft_fib_ipv4 nft_fib_ipv6 \ nft_fib nft_reject_inet nf_reject_ipv4 nf_reject_ipv6 nft_reject \ nft_ct nft_chain_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 \ ip_set rfkill nf_tables nfnetlink vfat fat virtio_balloon drm fuse xfs \ libcrc32c crct10dif_ce ghash_ce sha2_ce sha256_arm64 sha1_ce virtio_net \ net_failover virtio_console virtio_blk failover dimlib virtio_mmio CPU: 34 PID: 7578 Comm: test Kdump: loaded Tainted: G W 6.10.0-rc5-gavin+ #9 Hardware name: QEMU KVM Virtual Machine, BIOS edk2-20240524-1.el9 05/24/2024 pstate: 83400005 (Nzcv daif +PAN -UAO +TCO +DIT -SSBS BTYPE=--) pc : xas_split_alloc+0xf8/0x128 lr : split_huge_page_to_list_to_order+0x1c4/0x720 sp : ffff8000882af5f0 x29: ffff8000882af5f0 x28: ffff8000882af650 x27: ffff8000882af768 x26: 0000000000000cc0 x25: 000000000000000d x24: ffff00010625b858 x23: ffff8000882af650 x22: ffffffdfc0900000 x21: 0000000000000000 x20: 0000000000000000 x19: ffffffdfc0900000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000018000000000 x15: 52f8004000000000 x14: 0000e00000000000 x13: 0000000000002000 x12: 0000000000000020 x11: 52f8000000000000 x10: 52f8e1c0ffff6000 x9 : ffffbeb9619a681c x8 : 0000000000000003 x7 : 0000000000000000 x6 : ffff00010b02ddb0 x5 : ffffbeb96395e378 x4 : 0000000000000000 x3 : 0000000000000cc0 x2 : 000000000000000d x1 : 000000000000000c x0 : 0000000000000000 Call trace: xas_split_alloc+0xf8/0x128 split_huge_page_to_list_to_order+0x1c4/0x720 truncate_inode_partial_folio+0xdc/0x160 shmem_undo_range+0x2bc/0x6a8 shmem_fallocate+0x134/0x430 vfs_fallocate+0x124/0x2e8 ksys_fallocate+0x4c/0xa0 __arm64_sys_fallocate+0x24/0x38 invoke_syscall.constprop.0+0x7c/0xd8 do_el0_svc+0xb4/0xd0 el0_svc+0x44/0x1d8 el0t_64_sync_handler+0x134/0x150 el0t_64_sync+0x17c/0x180 Fix it by disabling PMD-sized page cache when HPAGE_PMD_ORDER is larger than MAX_PAGECACHE_ORDER. As Matthew Wilcox pointed, the page cache in a shmem file isn't represented by a multi-index entry and doesn't have this limitation when the xarry entry is split until commit 6b24ca4 ("mm: Use multi-index entries in the page cache"). Link: https://lkml.kernel.org/r/20240627003953.1262512-5-gshan@redhat.com Fixes: 6b24ca4 ("mm: Use multi-index entries in the page cache") Signed-off-by: Gavin Shan <gshan@redhat.com> Acked-by: David Hildenbrand <david@redhat.com> Cc: Darrick J. Wong <djwong@kernel.org> Cc: Don Dutile <ddutile@redhat.com> Cc: Hugh Dickins <hughd@google.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Ryan Roberts <ryan.roberts@arm.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Zhenyu Zhang <zhenyzha@redhat.com> Cc: <stable@vger.kernel.org> [5.17+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following batch contains Netfilter updates for net-next: Patch #1 fix checksum calculation in nfnetlink_queue with SCTP, segment GSO packet since skb_zerocopy() does not support GSO_BY_FRAGS, from Antonio Ojea. Patch #2 extend nfnetlink_queue coverage to handle SCTP packets, from Antonio Ojea. Patch #3 uses consume_skb() instead of kfree_skb() in nfnetlink, from Donald Hunter. Patch #4 adds a dedicate commit list for sets to speed up intra-transaction lookups, from Florian Westphal. Patch #5 skips removal of element from abort path for the pipapo backend, ditching the shadow copy of this datastructure is sufficient. Patch #6 moves nf_ct_netns_get() out of nf_conncount_init() to let users of conncoiunt decide when to enable conntrack, this is needed by openvswitch, from Xin Long. Patch #7 pass context to all nft_parse_register_load() in preparation for the next patch. Patches #8 and #9 reject loads from uninitialized registers from control plane to remove register initialization from datapath. From Florian Westphal. * tag 'nf-next-24-08-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: don't initialize registers in nft_do_chain() netfilter: nf_tables: allow loads only when register is initialized netfilter: nf_tables: pass context structure to nft_parse_register_load netfilter: move nf_ct_netns_get out of nf_conncount_init netfilter: nf_tables: do not remove elements if set backend implements .abort netfilter: nf_tables: store new sets in dedicated list netfilter: nfnetlink: convert kfree_skb to consume_skb selftests: netfilter: nft_queue.sh: sctp coverage netfilter: nfnetlink_queue: unbreak SCTP traffic ==================== Link: https://patch.msgid.link/20240822221939.157858-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

A sysfs reader can race with a device reset or removal, attempting to read device state when the device is not actually present. eg: [exception RIP: qed_get_current_link+17] #8 [ffffb9e4f2907c48] qede_get_link_ksettings at ffffffffc07a994a [qede] #9 [ffffb9e4f2907cd8] __rh_call_get_link_ksettings at ffffffff992b01a3 #10 [ffffb9e4f2907d38] __ethtool_get_link_ksettings at ffffffff992b04e4 #11 [ffffb9e4f2907d90] duplex_show at ffffffff99260300 #12 [ffffb9e4f2907e38] dev_attr_show at ffffffff9905a01c #13 [ffffb9e4f2907e50] sysfs_kf_seq_show at ffffffff98e0145b #14 [ffffb9e4f2907e68] seq_read at ffffffff98d902e3 #15 [ffffb9e4f2907ec8] vfs_read at ffffffff98d657d1 #16 [ffffb9e4f2907f00] ksys_read at ffffffff98d65c3f #17 [ffffb9e4f2907f38] do_syscall_64 at ffffffff98a052fb crash> struct net_device.state ffff9a9d21336000 state = 5, state 5 is __LINK_STATE_START (0b1) and __LINK_STATE_NOCARRIER (0b100). The device is not present, note lack of __LINK_STATE_PRESENT (0b10). This is the same sort of panic as observed in commit 4224cfd ("net-sysfs: add check for netdevice being present to speed_show"). There are many other callers of __ethtool_get_link_ksettings() which don't have a device presence check. Move this check into ethtool to protect all callers. Fixes: d519e17 ("net: export device speed and duplex via sysfs") Fixes: 4224cfd ("net-sysfs: add check for netdevice being present to speed_show") Signed-off-by: Jamie Bainbridge <jamie.bainbridge@gmail.com> Link: https://patch.msgid.link/8bae218864beaa44ed01628140475b9bf641c5b0.1724393671.git.jamie.bainbridge@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Machon says: ==================== net: microchip: add FDMA library and use it for Sparx5 This patch series is the first of a 2-part series, that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot open-coded bookkeeping and duplicate code for the two drivers. Additionally, upstreaming efforts for a third chip, lan969x, will begin in the near future. This chip will use the new library too. In this first series, the FDMA library is introduced and used by the Sparx5 switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: introduces library and selects it for Sparx5. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library helpers in the rx path. Patch #8: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #9: uses the library for adding DCB's in the tx path. Patch #10: uses the library helpers in the tx path. Patch #11: ditches the existing linked list for storing buffer addresses, and instead uses offsets into contiguous memory. Patch #12: modifies existing rx and tx functions to be direction independent. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…rnel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter updates for net-next The following patchset contains Netfilter updates for net-next: Patch #1 adds ctnetlink support for kernel side filtering for deletions, from Changliang Wu. Patch #2 updates nft_counter support to Use u64_stats_t, from Sebastian Andrzej Siewior. Patch #3 uses kmemdup_array() in all xtables frontends, from Yan Zhen. Patch #4 is a oneliner to use ERR_CAST() in nf_conntrack instead opencoded casting, from Shen Lichuan. Patch #5 removes unused argument in nftables .validate interface, from Florian Westphal. Patch #6 is a oneliner to correct a typo in nftables kdoc, from Simon Horman. Patch #7 fixes missing kdoc in nftables, also from Simon. Patch #8 updates nftables to handle timeout less than CONFIG_HZ. Patch #9 rejects element expiration if timeout is zero, otherwise it is silently ignored. Patch #10 disallows element expiration larger than timeout. Patch #11 removes unnecessary READ_ONCE annotation while mutex is held. Patch #12 adds missing READ_ONCE/WRITE_ONCE annotation in dynset. Patch #13 annotates data-races around element expiration. Patch #14 allocates timeout and expiration in one single set element extension, they are tighly couple, no reason to keep them separated anymore. Patch #15 updates nftables to interpret zero timeout element as never times out. Note that it is already possible to declare sets with elements that never time out but this generalizes to all kind of set with timeouts. Patch #16 supports for element timeout and expiration updates. * tag 'nf-next-24-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: set element timeout update support netfilter: nf_tables: zero timeout means element never times out netfilter: nf_tables: consolidate timeout extension for elements netfilter: nf_tables: annotate data-races around element expiration netfilter: nft_dynset: annotate data-races around set timeout netfilter: nf_tables: remove annotation to access set timeout while holding lock netfilter: nf_tables: reject expiration higher than timeout netfilter: nf_tables: reject element expiration with no timeout netfilter: nf_tables: elements with timeout below CONFIG_HZ never expire netfilter: nf_tables: Add missing Kernel doc netfilter: nf_tables: Correct spelling in nf_tables.h netfilter: nf_tables: drop unused 3rd argument from validate callback ops netfilter: conntrack: Convert to use ERR_CAST() netfilter: Use kmemdup_array instead of kmemdup for multiple allocation netfilter: nft_counter: Use u64_stats_t for statistic. netfilter: ctnetlink: support CTA_FILTER for flush ==================== Link: https://patch.msgid.link/20240905232920.5481-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Daniel Machon says: ==================== net: lan966x: use the newly introduced FDMA library This patch series is the second of a 2-part series [1], that adds a new common FDMA library for Microchip switch chips Sparx5 and lan966x. These chips share the same FDMA engine, and as such will benefit from a common library with a common implementation. This also has the benefit of removing a lot of open-coded bookkeeping and duplicate code for the two drivers. In this second series, the FDMA library will be taken into use by the lan966x switch driver. ################### # Example of use: # ################### - Initialize the rx and tx fdma structs with values for: number of DCB's, number of DB's, channel ID, DB size (data buffer size), and total size of the requested memory. Also provide two callbacks: nextptr_cb() and dataptr_cb() for getting the nextptr and dataptr. - Allocate memory using fdma_alloc_phys() or fdma_alloc_coherent(). - Initialize the DCB's with fdma_dcb_init(). - Add new DCB's with fdma_dcb_add(). - Free memory with fdma_free_phys() or fdma_free_coherent(). ##################### # Patch breakdown: # ##################### Patch #1: select FDMA library for lan966x. Patch #2: includes the fdma_api.h header and removes old symbols. Patch #3: replaces old rx and tx variables with equivalent ones from the fdma struct. Only the variables that can be changed without breaking traffic is changed in this patch. Patch #4: uses the library for allocation of rx buffers. This requires quite a bit of refactoring in this single patch. Patch #5: uses the library for adding DCB's in the rx path. Patch #6: uses the library for freeing rx buffers. Patch #7: uses the library for allocation of tx buffers. This requires quite a bit of refactoring in this single patch. Patch #8: uses the library for adding DCB's in the tx path. Patch #9: uses the library helpers in the tx path. Patch #10: ditch last_in_use variable and use library instead. Patch #11: uses library helpers throughout. Patch #12: refactor lan966x_fdma_reload() function. [1] https://lore.kernel.org/netdev/20240902-fdma-sparx5-v1-0-1e7d5e5a9f34@microchip.com/ Signed-off-by: Daniel Machon <daniel.machon@microchip.com> ==================== Link: https://patch.msgid.link/20240905-fdma-lan966x-v1-0-e083f8620165@microchip.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

apandit and others added 5 commits October 1, 2020 09:02

workflow: Add workflow files for ci

9358c43

This patch adds workflow files for ci: [schedule_work.yml] - The workflow file for scheduled work - Sync the repo with upstream repo and rebase the workflow branch - Review the patches in the patchwork and creates the PR if needed [ci.yml] - TBD

Bluetooth: btusb: Map Typhoon peak controller to BTUSB_INTEL_NEWGEN

bfb90e1

A new flag BTUSB_INTEL_NEWGEN has been defined for new generation Intel controllers. Map Typhoon peak Intel controller to BTUSB_INTEL_NEWGEN Signed-off-by: Kiran K <kiran.k@intel.com>

tedd-an force-pushed the workflow branch 4 times, most recently from 1c02bb4 to 63f977d Compare November 4, 2020 04:16

github-actions bot force-pushed the workflow branch 19 times, most recently from 5de434b to af1eb8d Compare November 11, 2020 08:56

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[PW_SID:363021] None #9

[PW_SID:363021] None #9

github-actions bot commented Oct 31, 2020

[PW_SID:363021] None #9

[PW_SID:363021] None #9

Conversation

github-actions bot commented Oct 31, 2020