Skip to content
forked from 0xCoto/PICTOR

📡 The official repository for the free-to-use PICTOR Radio Telescope

License

Notifications You must be signed in to change notification settings

theredcameron/PICTOR

 
 

Repository files navigation

PICTOR: A free-to-use Radio Telescope

PICTOR is an open-source radio telescope that allows anyone to observe the radio sky, using its convenient web platform for free: https://www.pictortelescope.com

alt text

alt text

About PICTOR

PICTOR consists of a 1.5-meter parabolic antenna that allows anyone to make continuous and spectral (i.e. hydrogen line) drift-scan observations of the radio sky in the 1300~1700 MHz regime for free.

The goal of this effort is to introduce students, educators, astronomers and others to the majesty of the radio sky, promoting radio astronomy education, without the need of building a large and expensive radio telescope.

PICTOR is a fully open source (software & hardware) project.

Technical Details (Telescope Specifications)

Telescope diameter: 1.5m (4.92 ft = 59.05")
Focal Ratio (F/D): 0.411 (prime focus antenna)
Beamwidth (HPBW @ 1420 MHz): ~8.95° (k factor = 63.64)
Operating frequency range: 1300~1700 MHz (L band)
Two-stage low-noise amplifier (LNA): Gain: 30 ± 2 dB - Noise figure (NF): < 0.5 dB
High-pass filter: -30 dBc below 900 MHz
Third-stage LNA (used as an in-line amplifier): Gain: > 9 dB *
Band-pass filter: f_center = 1420 MHz (designed for hydrogen line observations) *
Instantaneous bandwidth (IBW): up to 3.2 MHz (sufficient for spectral observations) [to be upgraded to 30.72 MHz]
Number of channels: up to 2048 (for high frequency-resolution observations) [to be upgraded to 16384]

*Deemed unnecessary hence removed

Telescope Block Diagram

alt text

PICTOR System Flowgraph

alt text

GRC Data Acquisition Flowgraph (old)

alt text

GRC Data Acquisition Flowgraph (Polyphase Filterbank (PFB))

alt text

Feedhorn Dimensions

alt text

S-Parameters

S-Parameter of the monopole inside the feed: alt text

S-Parameter of the feedhorn (with rod) - this should be the considered S-Parameter of the antenna in its entirety: alt text

Measured with the Keysight N5221A PNA Network Analyzer (10 MHz~13.5 GHz): alt text alt text

Example Observation

alt text

Wish to observe with PICTOR?

Take a look at the PDF guide containing all the information you need to know in order to conduct your first observation of the radio sky!

PICTOR Telescope Logo

A description/role for each file

File Description
observe.py Listens for observation requests & conducts observations
plot.py Produces plots from observation data
plot_hi.py Produces HI-tailored plots (i.e. +calibrated spectrum) from observation data
id_history.txt Serves as an observation ID history database
fft_integration.grc GRC Flowgraph previously used for the recording and processing of the data
top_block_old.py Embedded Python Block for fft_integration.grc
pfb.grc GRC Polyphase Filterbank Flowgraph for efficient data acquisition
top_block.py Embedded Python Block for pfb.grc
observe.php Includes server-side PHP code for /observe
Waveguide.stl STL file for feedhorn visualization

Credits

PICTOR was built by Apostolos Spanakis-Misirlis.

Special thanks to Dr. Cameron Van Eck for his thorough guidance throughout the development of PICTOR, the Telecommunication Systems Laboratory of the Department of Digital Systems at the University of Piraeus for allowing us to conduct decisive antenna measurements, the Dwingeloo Radio Observatory (Paul Boven & Dr. Cees Bassa) for helping with the recording & the plotting of the data, Vasilis Spanakis-Misirlis for his engineering assistance and Yannick & Tino for their back-end contribution to observe.php.

About

📡 The official repository for the free-to-use PICTOR Radio Telescope

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Python 67.1%
  • PHP 32.6%
  • HTML 0.3%