-
Notifications
You must be signed in to change notification settings - Fork 131
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
[BUG][TGL]Warning message "snd_hda_codec_hdmi ehdaudio0D2: ASoC: can't open DAI intel-hdmi-hifi2: -16" occurred during multipipline test. #1978
Comments
Issue also can be reproduced on TGL-U RVP. Test recipe Kernel:https://github.com/thesofproject/linux/commits/topic/sof-dev commit:b8464d14 |
I wonder if test is opening the wrong PCM as part of the test (or Pulseaudio running on background)? This error trace is expected if trying to play to a HDMI/DP PCM that is not connected to a monitor. This should not happen in normal usage as Pulseaudio/CRAS only show HDMI/DP PCM devices that are connected. |
Error not occurred on TGL chrome with 373 i2s+ 5682 with Kernel 5cb79ee + PR#2062 |
Error also can be seen with https://github.com/thesofproject/sof/tree/tgl-007-drop-stable on chrome book with codec 98373 in I2S mode. |
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Error not seen on TGL Volteer I2S with codec 98357 |
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: #1978 BugLink: #2216 BugLink: #2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: #1978 BugLink: #2216 BugLink: #2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: #1978 BugLink: #2216 BugLink: #2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: #1978 BugLink: #2216 BugLink: #2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503)
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject#1978 BugLink: thesofproject#2216 BugLink: thesofproject#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5627503 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: kavencat <shi772425803@163.com>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: kavencat <shi772425803@163.com>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: kavencat <shi772425803@163.com>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56275036d8185f92eceac7479d48b858ee3dab84 ] When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>
jira LE-1907 Rebuild_History Non-Buildable kernel-4.18.0-294.el8 commit-author Kai Vehmanen <kai.vehmanen@linux.intel.com> commit 5627503 When HDMI PCM devices are opened in a specific order, with at least one HDMI/DP receiver connected, ALSA PCM open fails to -EBUSY on the connected monitor, on recent Intel platforms (ICL/JSL and newer). While this is not a typical sequence, at least Pulseaudio does this every time when it is started, to discover the available PCMs. The rootcause is an invalid assumption in hdmi_add_pin(), where the total number of converters is assumed to be known at the time the function is called. On older Intel platforms this held true, but after ICL/JSL, the order how pins and converters are in the subnode list as returned by snd_hda_get_sub_nodes(), was changed. As a result, information for some converters was not stored to per_pin->mux_nids. And this means some pins cannot be connected to all converters, and application instead gets -EBUSY instead at open. The assumption that converters are always before pins in the subnode list, is not really a valid one. Fix the problem in hdmi_parse_codec() by introducing separate loops for discovering converters and pins. BugLink: thesofproject/linux#1978 BugLink: thesofproject/linux#2216 BugLink: thesofproject/linux#2217 Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20200703153818.2808592-1-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de> (cherry picked from commit 5627503) Signed-off-by: Jonathan Maple <jmaple@ciq.com>
Describe the bug
WARNIG messge "snd_hda_codec_hdmi ehdaudio0D2: ASoC: can't open DAI intel-hdmi-hifi2: -16" occurred during multipipline test. Other function won't be effected after the warning message shows up.
To Reproduce
Script:
https://github.com/thesofproject/sof-test/blob/master/test-case/multiple-pipeline-playback.sh
Reproduced rate
Will reproduce the issue within 10 iterations each round.
Expected result
multipipine test works fine.
Actual result
Test failed, and dmesg showed "snd_hda_codec_hdmi ehdaudio0D2: ASoC: can't open DAI intel-hdmi-hifi2: -16" .
Environment
kernel: https://github.com/thesofproject/linux/commits/topic/sof-dev commit b8464d1 + #1971 (DSM support)
FW: https://github.com/thesofproject/sof/tree/tgl-004-drop-stablecommit: 8ad6761 + thesofproject/sof#2405 (WOV tplg)
tplg: sof-tgl-max98373-rt5682.m4 https://github.com/thesofproject/sof/tree/tgl-004-drop-stablecommit: 8ad6761 + thesofproject/sof#2405 (WOV tplg)
platform: TGL Chromebook in I2S mode
due to the issue thesofproject/sof#2507, it blocked the sof-trace log.
dmesg:
multipipline_dmesg.log
The text was updated successfully, but these errors were encountered: