Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

This code example demonstrates connecting to AWS IoT over MQTT using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates Over-the-Air (OTA) firmware update using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This example demonstrates updating the device firmware using the Over-The-Air (OTA) feature of Amazon FreeRTOS.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-cdc-echo. This example demonstrates how to configure the USB block in a PSoC 6 MCU for Communication Device Class (CDC). When configured for a CDC, the PSoC 6 enumerates a Virtual COM port, which can be read and written by a terminal emulator program on PC.

This code example demonstrates how to run through the ModusToolbox Machine Learning (MTB-ML) development flow with PSoC 6 MCU, where the end user has a pre-trained Neural Network (NN) model, which can be profiled and validated at the PC and target device.

This code example demonstrates Wi-Fi provisioning via SoftAP and setting up a web server with PSoC 6 MCU and CYW43xxx connectivity devices.

This example demonstrates how to use the protection units to isolate the CM0+ from CM4.

This community code example demonstrates streaming audio via Bluetooth Classic A2DP source profile from PSoC6 to external Bluetooth speaker/earbuds.

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

This example demonstrates the usage of CSD analog-to-digital converter (ADC) in PSoC 6 MCU.

This code example demonstrates the implementation of a simple BLE GAP Peripheral - GATT Client with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs

This code example demonstrates implementing a TCP client using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This code example demonstrates implementing a UDP client using the AnyCloud SDK for PSoC 6 MCU and CYW43xxx connectivity devices.

This example demonstrates the use of I2C (HAL) resource for PSoC6 MCU in Master mode

This code example demonstrates the low-power operation of PSoC 6 MCU and CYW43xxx connectivity devices using the AnyCloud Low Power Assistant (LPA) middleware library.

This code example demonstrates how to interface PSoC 6 MCU with a BMI160 Motion Sensor over an I2C interface within a FreeRTOS task. This example reads raw motion data and estimates the orientation of the board.

This code example demonstrate basic device firmware update (DFU), also known as "bootloading", with PSoC® 6 MCU. This includes downloading an application from a host and installing it in device flash, and then transferring control to that application.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This empty application provides a template for creating applications using PSoC 6 devices.