This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.

This code example demonstrates the implementation of a simple Bluetooth LE Battery Service. The Battery Service exposes the Battery Level of the device and comes with support for OTA update over Bluetooth LE.

This code example demonstrates the implementation of a simple BLE GAP Central - GATT Server with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs.

This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.

This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829.

This example demonstrates how to use the inter-processor communication (IPC) driver to implement a semaphore in PSoC 6 MCU. The semaphore is used to lock to control access to a resource shared by the CPUs and synchronize the initialization instructions.

This empty application provides a template for creating applications using PSoC 6 devices.

This code example demonstrates the implementation of the Bluetooth® LE Battery Service Client using the AIROC™ CYW20829 Bluetooth® chip and ModusToolbox™ software environment.

This example demonstrates the operation of the I2C (HAL) resource for PSoC 6 MCU in Slave mode using callbacks

This code example demonstrates the privacy features available to users in Bluetooth 5.0 and above using ModusToolbox™ software.

This code example demonstrates the implementation of a simple BLE GAP Peripheral - GATT Client with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs

The code example demonstrates how to view the CapSense debug data and tune the CapSense sensors over BLE communication using CapSense Tuner GUI in PSoC 6 devices.

This example demonstrates the usage of the real-time clock (RTC) in PSoC 6 MCU. It shows how to get and set the time in the RTC using the RTC driver API.

This example demonstrates the use of SPI (HAL) resource for PSoC6 MCU in Master mode.

This code example demonstrates the use of the I2C resource in HAL in slave mode. The I2C slave is configured to receive command packets to control a user LED on the kit.

This example demonstrates the use of I2C (HAL) resource for PSoC6 MCU in Master mode

This code example generates a square wave using the TCPWM resource configured as a PWM. An LED connected to the PWM output pin blinks at 2 Hz.

This code example generates an interrupt every second with the TIMER driver, and toggles the user LED when a timer interrupt is generated.

mtb-example-hal-rtc-periodic-wakeup

This application demonstrates how to set up a 32-bit free-running counter using two 16-bit counters of the Multi-Counter Watchdog Timer (MCWDT). The application is implemented using LPTimer HAL APIs , which use a cascade of Counter 0 and Counter 1 in free-running mode.