This code example demonstrates the implementation of the Bluetooth® LE vendor-specific device using AIROC™ CYW20829, PSoC™ 6, Wi-Fi & Bluetooth® combo chips and ModusToolbox™ software environment.

This example demonstrates the UART (HAL) transmit and receive operation in PSoC 6 MCU.

Demonstrates simple UART communication by printing a "Hello World" message on a terminal and blinks an LED using a Timer resource.

This code example demonstrates the implementation of a simple Bluetooth LE Immediate Alert Service (IAS)-based Find Me Profile (FMP) using PSoC 6 MCU with Bluetooth Low Energy Connectivity.

This code example demonstrates the implementation of a simple BLE Environmental Sensing Profile.

This code example demonstrates the implementation of a simple Bluetooth LE Battery Service. The Battery Service exposes the Battery Level of the device and comes with support for OTA update over Bluetooth LE.

This code example demonstrates the implementation of a simple BLE GAP Central - GATT Server with Current Time Service using the Cypress Combo (Wi-Fi+BT) SoCs.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This example demonstrates the UART transmit and receive operation using DMA in PSoC 6 MCU.

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

This code example demonstrates generating a One-Time Password (OTP) using the True Random Number generation (TRNG) feature of PSoC 6 MCU cryptography block.

This is a minimal starter dual-CPU security application template for PSoC™ 62/63 MCU devices. This code example is meant to be a companion to the AN221111 – PSoC™ 6 MCU: Designing a secured system application note. It demonstrates the following features to create a secured system as explained in the application note.

This example uses a SPI resource and Smart I/O in PSoC 6 MCU to implement the Serial General Purpose Input/Output (SGPIO) Target interface, which is a four-signal bus defined in the SFF-8485 standard. Another SPI resource is used to implement the SGPIO Initiator, which drives the clock on the SGPIO bus.

This example demonstrates how to use the inter-processor communication (IPC) driver to implement a semaphore in PSoC 6 MCU. The semaphore is used to lock to control access to a resource shared by the CPUs and synchronize the initialization instructions.

This example demonstrates how to use the I2S hardware block in PSoC 6 MCU to interface with an audio codec.

This code example demonstrates the implementation of a BLE Battery Service using PSoC 6 MCU with Bluetooth Low Energy Connectivity (PSoC 6 BLE). This code example implements a GATT Server with the Battery Service and Device Information Service BLE standards. This code example uses FreeRTOS.

This example demonstrates how to use the inter-processor communication (IPC) driver to implement a message pipe in PSoC 6 MCU. The pipe is used to send messages between CPUs.

This code example demonstrates the implementation of the Bluetooth® LE Battery Service Client using the AIROC™ CYW20829 Bluetooth® chip and ModusToolbox™ software environment.

This code example demonstrates the maximum throughput (using GATT layer notification and GATT write command) that can be achieved with Infineon® PSoC™ 6 MCU with AIROC™ Bluetooth® LE, AIROC™ CYW20829.

This example demonstrates the use of I2C (HAL) resource for PSoC6 MCU in Master mode