[Collaborated with Elliott] Mobile platform projectile launcher, including turret, movement, and navigation algorithm.

MSP430-based wireless signal tester using CC110L BoosterPack.

This repository is for Energia Projects

Sketch for MSP430-based repeater hub for an outdoor weather sensor using a CC110L BoosterPack. Listens on one channel and repeats packet on another channel.

Library to interface with the 74HC4511 BCD to Seven Segment LED driver.

Status monitor using TM4C1294 Connected LaunchPad and K350QVG-S1 320x240 LCD BoosterPack. Can be used as example code for ArduinoJson, ThingSpeak IoT REST API, Arduino Time Library, NTP.

使用CC3200模组实现MQTT通信

MSP430-based low-power wireless temperature sensor using waterproof DS18B20 module. Demonstrates use of OneWire protocol and low-power wireless operation.

An electronical project hardware (PCB implementation, circuit components projection) & software implementation in Energia (a simplify framework from C++ very similar to Arduino) which converts sampled sounds generated by a code into real audible musical sounds/notes through a hardware digital to analog converter.

My projects using Arduino Software Platform and Arduino-based Boards

This sketch implements a simple external hardware watchdog that can be loaded onto a low-end MSP processor to provide a watchdog reset signal. It should also work on AVR processors, although it has not been tested on AVRs

Demo in programming for a tiny open source spacecraft!

GPS Receiver setup using Tiva TM4C LaunchPad, SparkFun ZOE-M8Q GPS breakout, and CrystalFonz 8x2 LCD.

Embedded Parking Occupancy Sensor

Simple wireless temperature sensor based on TI MSP430G2553 and CC110L BoosterPack. Can be adapted to use other MSP430 variants. Very low power operation -- a single 3V coin cell can power the sensor for well over a year.

Library and example for TI MSP430 LaunchPads and Energia that reads a card number from RFID_RC522 without RST pin

Various example and testing programs for experimenting with the TI-RSLK.

Simple retro calculator using NSA1166 bubble LED display.

morse code transmitter library

A simple task library for Arduino, based on setjmp/longjmp