A command-line tool to update KitProg low-level program/debug communication firmware on Cypress kits
-
Updated
May 29, 2024
A command-line tool to update KitProg low-level program/debug communication firmware on Cypress kits
The STM32 Connectivity Expansion Pack is an extension of the CMSIS-Pack standard established by Arm to support Wi-Fi and Bluetooth LE application on STM32 MCUs with Infineon Wireless Combo devices.Infineon STM32 Connectivity Expansion Pack
Device Family Packs for IDE support - used automatically by build systems
2 Channel Oscilloscope and Waveform Geneator uisng a CY8CKIT-059 board and a TCL based PC GUI.
PSoC 4 BLE is an easy-to-use, ARM® Cortex™-M0 based, single-chip solution which integrates programmable analog front ends, programmable digital peripherals, CapSense® technology for touch-sensing, and a Bluetooth® LE (Low Energy) or Bluetooth Smart radio.
This application integrates the command console library including Wi-Fi iPerf and Bluetooth LE functionality. Using this application, you can characterize the Wi-Fi/BLE functionality and performance.
FPGA project source code to interface HDMI Receiver with SX3 with DDR based frame buffer implementation to support resolutions of up to 4K 30fps.
FPGA project source code to interface HDMI Receiver with SX3 without frame buffer implementation to support video resolutions of up to 1080p 60fps.
FPGA source code that can be used to test SX3 data parts (CYUSB3015 / CYUSB3016). Three modes are supported. 1- IN only, 2- OUT only, 3- IN + OUT only
FPGA source code that generates single-tone sine wave audio data and colorbar for video resolution with height and width configurable through I2C interface. This test project can be used to validate FPGA to SX3 interface without dependency on HDMI Receiver interface. This FPGA project can be used to test UVC only, UAC only, UVC+UAC configurations.
A sample HID command line application for Windows OS that can be used for firmware update over HID interface. The application takes VID, PID, and firmware image as inputs and updates the SPI flash connected to SX3. The HID application also supports the command to erase SPI flash and fallback to USB boot loader.
A sample UVC extension unit application for Windows OS that can be used for reading SX3 firmware version and for resetting the device. SX3 does not support additional extension unit commands.
This code example features a 5-segment CapSense slider and two CapSense buttons. The status of the buttons and slider are stored in an AWS thing shadow.
This example scans for Wi-Fi APs and prints the details. The scan process runs as a task with 5 seconds delay between successive scans.
This example demonstrates the implementation of a weather station using IoT libraries of Amazon FreeRTOS
This code example demonstrates how to connect a kit to WiFi by provisioning the WiFi credentials via BLE
This code example demonstrates displaying graphics on an EInk display using EmWin graphics library in Mbed OS.
This example demonstrates how to display graphics on an OLED display using emWin graphics library in Mbed OS.
Add a description, image, and links to the non-mtb-2-x topic page so that developers can more easily learn about it.
To associate your repository with the non-mtb-2-x topic, visit your repo's landing page and select "manage topics."