IoT Plug and Play bridge

Example programs MSP430F5529

This code example demonstrates USB-C attach detection and USB Power Delivery contract negotiation using PMG1 devices.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-cdc-echo. This example demonstrates how to configure the USB block in a PSoC 6 MCU for Communication Device Class (CDC). When configured for a CDC, the PSoC 6 enumerates a Virtual COM port, which can be read and written by a terminal emulator program on PC.

This example demonstrates how to configure a GPIO to generate an interrupt in PSoC 6 MCU.

This code example demonstrate basic device firmware update (DFU), also known as "bootloading", with PSoC® 6 MCU. This includes downloading an application from a host and installing it in device flash, and then transferring control to that application.

This code example encrypts and decrypts user input data using the AES algorithm using a 128-bit key. The encrypted and decrypted data are displayed on a UART terminal emulator.

This example demonstrates the use of I2C (HAL) resource for PSoC6 MCU in Master mode

This example demonstrates use of the ADC (Analog to Digital Converter) HAL driver to perform voltage measurements.

Deprecated. Use https://github.com/Infineon/mtb-example-usb-device-msc-filesystem-freertos. This example demonstrates how to configure the USB block in a PSoC 6 MCU device as a Mass Storage (MSC) device and run a file system (FatFs) through an external memory (microSD). This example uses FreeRTOS.

This example demonstrates the usage of CSD analog-to-digital converter (ADC) in PSoC 6 MCU.

This code example demonstrates emulation of EEPROM behavior in flash memory of PSoC 6 MCU using emeeprom middleware.

This example demonstrates how to use the inter-processor communication (IPC) driver to implement a message pipe in PSoC 6 MCU. The pipe is used to send messages between CPUs.

This code example demonstrates the wireless charging power transmitter EPP function with USB-PD sink as the power input.

This example demonstrates how to use the protection units to isolate the CM0+ from CM4.

This code example demonstrates implementation of a shell on the UART communication interface including commands to toggle a LED using XMC MCU.

This example demonstrates the usage of the real-time clock (RTC) in PSoC 6 MCU. It shows how to get and set the time in the RTC using the RTC driver API.

minimalistic peripheral access library for the Raspberry Pi