You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
This code example demonstrates the UART transmit and receive operation in PSoC 4. The application uses a serial terminal to read data and to echo back the received data. The UART resource is configured to do both transmit and receive operations.
This code example demonstrates the use of a SPI (HAL) resource in slave mode. The SPI slave is configured to receive command packets to control an user LED on the kit.
This code example demonstrates the usage of Capture-Compare Unit 8 (CCU8) in the XMC MCU in timer mode. The CCU8 timer slice program blinks an LED when a timer period match interrupt occurs.
This code will demonstrate how to use CSG module of HRPWM to control the ccu8 timer pwm output by latching the start and stop function to comparator output.
This example demonstrates how to transmit CAN messages over the CAN bus using XMC MCU. This example can be used with the CAN Receiver example running on another board.
This example demonstrates how to use the inter-processor communication (IPC) driver to implement a message pipe in XMC7000 MCU. This example contains how to use the IPC low level I/F. The low level I/F directly controls the IPC.