This example explains how to set up a Watchdog Timer (WDT) using the WDT HAL resource
-
Updated
Jul 24, 2023 - Makefile
This example explains how to set up a Watchdog Timer (WDT) using the WDT HAL resource
This code example demonstrates how to use the SysTick timer to generate a timer interrupt on xmc7000 MCU.
This example demonstrates the transfer of data from the flash to the RAM using the GPDMA peripheral.
This code example demonstrates the use of a SPI (HAL) resource in slave mode. The SPI slave is configured to receive command packets to control an user LED on the kit.
This code example demonstrates GPIO toggling by periodically blinking an LED using SysTick available in XMC MCU.
This code example demonstrates the capture feature of Capture and Compare unit (CCU8) slices available in XMC MCU.
This code example demonstrates the capture features of the Capture and Compare Unit 4 (CCU4) slices available in XMC MCU.
This code example demonstrates how to configure the GPIO registers using GPDMA.
This code example demonstrates the usage of Capture-Compare Unit 8 (CCU8) in the XMC MCU in timer mode. The CCU8 timer slice program blinks an LED when a timer period match interrupt occurs.
This code example demonstrates the usage of the Analog Comparator (ACMP) peripheral of XMC MCU.
This code example demonstrates how to enter the DeepSleep and Hibernate mode, and wakeup using the RTC alarm.
This code example demonstrates the concatenation or linking feature of the Capture and Compare Unit 8 (CCU8) slices available in XMC MCU.
This example demonstrates how to use the printf function with a Universal Serial Interface Channel (USIC) based UART in XMC MCU.
This code will demonstrate how to use CSG module of HRPWM to control the ccu8 timer pwm output by latching the start and stop function to comparator output.
This code example demonstrates how to use the tcpwm counter on the XMC7000 MCU.
This code example demonstrates how to use TSE (on-chip temperature sensor). TSE calculates temperature readings from the sensor and sends them over UART periodically every 1 s.
Add a description, image, and links to the peripherals topic page so that developers can more easily learn about it.
To associate your repository with the peripherals topic, visit your repo's landing page and select "manage topics."