An example / boilerplate project of using CubeMX generated HAL library files for compilation with PlatformIO

STM32CubeMX HAL example's collection (main.c only)

Sample projects for STM32 programming using STM32CubeIDE

Firmware for Visual/Inertial monocular SLAM system with micro-ROS

Control the PWM duty cycle with the conversion value of the ADC

This application has two independent 7-segment display(3-digit display & single-digit display) and indepent user input buttons in single MCU. It display the user input and gives the binery out at gpio of a MCU.

Servotester based on STM32L478G-Discovery board

STM32F103C8T6 project template for CLion.

STM32CubeMX and ucglib for colour display

Programación de microcontroladores - CESE - FIUBA

To create a new STM32CubeIDE project without STM32CubeMX

This is a 4x4 USB HID Keypad application. It consist 0-9,A,B,C,*,# characters and backspace.

嵌入式专题培训任务一

The application adjust the fan speed set by the user. It uses IR for calculating the speed of fan. User can give the data using serial terminal(UART). This application adjust the triggering time of TRIAC by comparing fan actual speed and user seted speed.It uses timers for measuring the fan speed and for triggering the TRIAC.

ARM based microcontroller driver development.

Some Arm Assembly Code for Stm32-M4 board/cpu and a project with RedBlocks used for simulation . Programs used Keil uVision(IDE), RedBlocks Simulator. In latest projects I used STM32CUBEMX too

STM32 ARM Cortex M4 Microcontroller- Basic Exercises using STM32 Hardware Abstraction Layer (HAL) for Nucleo-64 development board with STM32F446RE MCU with Arduino Uno V3 connectivity support

Prácticas de Diseño de Sistemas Basados en Microprocesadores UCLM