EOSIO.CDT (Contract Development Toolkit)

Version : 1.3.2

EOSIO.CDT is a toolchain for WebAssembly (WASM) and set of tools to facilitate contract writing for the EOSIO platform. In addition to being a general purpose WebAssembly toolchain, EOSIO specific optimizations are available to support building EOSIO smart contracts. This new toolchain is built around Clang 7, which means that EOSIO.CDT has the most currently available optimizations and analyses from LLVM, but as the WASM target is still considered experimental, some optimizations are not available or incomplete.

Important!

EOSIO.CDT Version 1.3.x introduced quite a few breaking changes. To have binary releases we needed to remove the concept of a core symbol from EOSIO.CDT. This meant drastic changes to symbol, asset and other types/functions that were connected to them. Since these changes would be disruptive, we decided to add as many disruptive changes needed for future contract writing, so that disruption should only occur once. Please read the Differences between Version 1.2.x and Version 1.3.x section of this readme.

Binary Releases

EOSIO.CDT currently supports Mac OS X brew, Linux x86_64 Debian packages, and Linux x86_64 RPM packages.

If you have previously installed EOSIO.CDT, please run the uninstall script (it is in the directory where you cloned EOSIO.CDT) before downloading and using the binary releases.

Mac OS X Brew Install

$ brew tap eosio/eosio.cdt
$ brew install eosio.cdt

Mac OS X Brew Uninstall

$ brew remove eosio.cdt

Debian Package Install

$ wget https://github.com/eosio/eosio.cdt/releases/download/v1.3.2/eosio.cdt-1.3.2.x86_64.deb
$ sudo apt install ./eosio.cdt-1.3.2.x86_64.deb

Debian Package Uninstall

$ sudo apt remove eosio.cdt

RPM Package Install

$ wget https://github.com/eosio/eosio.cdt/releases/download/v1.3.2/eosio.cdt-1.3.2.x86_64-0.x86_64.rpm
$ sudo yum install ./eosio.cdt-1.3.2.x86_64-0.x86_64.rpm

RPM Package Uninstall

$ sudo yum remove eosio.cdt

Guided Installation (Building from Scratch)

$ git clone --recursive https://github.com/eosio/eosio.cdt
$ cd eosio.cdt
$ ./build.sh
$ sudo ./install.sh

Building your first smart contract

• Navigate to the hello folder in examples (./examples/hello).
• You should then see the hello.cpp file
• Now run the compiler

$ eosio-cpp -abigen hello.cpp -o hello.wasm

• Or with CMake

$ mkdir build
$ cd build
$ cmake ..
$ make

This will generate two files:

• The compiled binary wasm (hello.wasm)
• The generated ABI file (hello.abi)

using eosio-abigen alone

To generate an ABI with eosio-abigen, only requires that you give the main '.cpp' file to compile and the output filename --output and generating against the contract name --contract.

Example:

$ eosio-abigen hello.cpp --contract=hello --output=hello.abi

This will generate one file:

• The generated ABI file (hello.abi)

Differences between Version 1.2.x and Version 1.3.x

eosiolib C API

• Removed the following typedefs to uint64_t:
  • account_name
  • permission_name
  • scope_name
  • table_name
  • action_name
• Added a uint64_t typedef called capi_name to replace the removed typedefs above:
  • These have been replaced by capi_name and as a practice should not be used when writing C++ contract code. Instead, the new version of the eosio::name type from the eosiolib C++ API should be used to replace these instances. This decision was made because of bad implicit casting issues with uint64_t and the new pattern should allow for better type safety.
• Removed symbol_name typedef:
  • This has no C equivalent to replace it. When writing C++ contract code, the eosio::symbol_code struct should be used instead. As with the previously mentioned named types, this was removed and replaced with eosio::symbol_code to allow for better type safety in contracts. To use a symbol, i.e. symbol name and precision, use the eosio::symbol class.
• Removed time and weight_type typedefs.
• Removed the transaction_id_type and block_id_type typedefs.
• Removed the account_permission struct.
• Renamed the following typedefs:
  • checksum160 -> capi_checksum160
  • checksum256 -> capi_checksum256
  • checksum512 -> capi_checksum512
  • public_key -> capi_public_key
  • signature -> capi_signature
• Removed the non-existent intrinsics declarations require_write_lock and require_read_lock.

eosiolib C++ API

• Removed eosiolib/vector.hpp:
  • Removed alias eosio::vector and typedef bytes.
  • Going forward contract writers should include <vector> from the STL and use std::vector<char> instead of bytes.
• Removed eosiolib/types.hpp.
• Removed eosiolib/optional.hpp. Use std::optional as a replacement.
• Removed eosiolib/core_symbol.hpp. The contract writer should explicitly specify the symbol.
• Added eosiolib/name.hpp.

eosiolib/types.hpp

• Moved the typedef eosio::extensions_types to eosiolib/transaction.hpp.
• Removed comparison functions for checksum structs.
• Removal of eosio::char_to_symbol, eosio::string_to_name, eosio::name_suffix functions
• Removal of the N macro. The ""_n operator or the name constructor should be used as a type safe replacement. Example: N(foo) -> "foo"_n, or N(foo) -> name("foo").
• Moved eosio::name struct definition and ""_n operator to eosiolib/name.hpp.

eosiolib/name.hpp

• Removed implicit and explicit conversions to uint64_t.
• Added enum class eosio::name::raw which is implicitly converted from an eosio::name (used for template non-type parameters).
• Added bool conversion operator for conditionally testing if a name is empty.
• All constructors are now constexpr. These take either a uint64_t, an eosio::name::raw or a std::string_view.
• Added constexpr methods eosio::name::length and eosio::name::suffix.
• Added equivalence, inverted equivalence and less than operators to eosio::name.

eosiolib/symbol.hpp

• Removed eosio::symbol_type struct and replaced with eosio::symbol class.
• Added struct eosio::symbol_code:
  • Added two constexpr constructors that take either a raw uint64_t or an std::string_view.
  • Added constexpr methods is_valid, length and raw.
  • Added a print method.
  • Added bool conversion operator to test is symbol_code is empty.
• Removed eosio::string_to_symbol, eosio::is_valid_symbol, eosio::symbol_name_length functions.
• Removed the S macro. The symbol constructor should be used as a type safe replacement. Example: S(4,SYS) -> symbol(symbol_code("SYS"), 4) (or simply symbol("SYS", 4) as of v1.3.1).
• Added struct eosio::symbol:
  • Added three constexpr constructors that take either a raw uint64_t, symbol_code and a uint8_t precision or an std::string_view and a uint8_t precision.
  • Added constexpr methods is_valid, precision, code, and raw. These, respectively, check if the symbol is valid, get the uint8_t precision, get the symbol_code part of the symbol, and get the raw uint64_t representation of symbol.
  • Added equivalence, inverted equivalence and less than operators to eosio::symbol.
• Modified struct eosio::extended_symbol:
  • Restricted fields to private.
  • Added constexpr constructor that takes a eosio::symbol and an eosio::name.
  • Added constexpr methods get_symbol and get_contract.
  • Made existing comparison operators constexpr.

eosiolib/asset.hpp

• The main constructor now requires a int64_t (quantity) and eosio::symbol explicitly.
• The default constructor no longer initializes the instance to a valid zero quantity asset with a symbol equivalent to "core symbol". Instead the default constructed eosio::asset is a bit representation of all zeros (which will cause is_valid to fail) so that check is bypassed to allow for multi_index and datastream to work.
• Old contracts that use eosio::asset() should be changed to either use the core symbol of the specific chain they are targeting i.e. eosio::asset(0, symbol(symbol_code("SYS"),4)). To reduce writing symbol(symbol_code("SYS"),4) over and over, a constexpr function to return the symbol or constexpr global variable should be used.

eosiolib/contract.hpp

• The constructor for eosio::contract now takes an eosio::name for the receiver, an eosio::name for the code, and a eosio::datastream<const char*> for the datastream used for the contract. The last argument is for manually unpacking an action, see the section on eosio::ignore for a more indepth usage.

eosiolib/dispatcher.hpp

• Renamed the macro EOSIO_ABI to EOSIO_DISPATCH as this is more descriptive of what this macro actually does.
• Modified the definition of EOSIO_DISPATCH to work with the new constructor for eosio::contract.

eosiolib/multi_index.hpp

• The first template parameter for indexed_by now requires the argument be convertible to eosio::name::raw (replacing uint64_t).
• The first template parameter for multi_index now requires the argument be convertible to eosio::name::raw (replacing uint64_t).
• The constructor now takes an eosio::name type for the code (replacing uint64_t). Scope is still uint64_t.
• Various other replacements of uint64_t to eosio::name.

eosiolib/singleton.hpp

• The first template parameter for eosio::singleton now requires the argument be convertible to eosio::name::raw (replacing uint64_t).
• The constructor now takes an eosio::name type for the code.
• In the methods get_or_create and set, the argument bill_to_account is now of type eosio::name (replacing uint64_t).

eosiolib/action.hpp

• Added C++ function eosio::require_auth.
• Added C++ function eosio::has_auth.
• Added C++ function eosio::is_account.
• Redefined eosio::permission_level to use eosio::name in place of uint64_t.
• Removed the macro ACTION. (The identifier ACTION has been reused for another macro described below in the Macros section.)

eosiolib/permission.hpp

• The optional provided_keys argument of the function eosio::check_transaction_authorization is now of the type std::set<eosio::public_key> rather than the type std::set<capi_public_key>. C++ contract code should most likely be using the eosio::public_key struct (defined in "eosiolib/public_key.hpp") if they need to deal with EOSIO-compatible public keys rather than the capi_public_key struct (now renamed from its original name of ::public_key) from the eosiolib C API. Note that existing contract code that just referred to the type public_key without namespace qualification may have accidentally been using the capi_public_key struct and therefore should ideally be modified to use the eosio::public_key C++ type.
• The account and permission arguments of eosio::check_transaction_authorization are both eosio::name now instead of uint64_t.

eosiolib/ignore.hpp

• Added new type ignore:
  • This type acts as a placeholder for actions that don't want to deserialize their fields but want the types to be reflected in the ABI.

    ACTION action(ignore<some_type>) { some_type st; _ds >> st; }

• Added new type ignore_wrapper:
  • This allows for calling SEND_INLINE_ACTION with ignore_wrapper(some_value) against an action with an ignore of matching types.

Macros

• Added ACTION macro which is simply a shortcut for [[eosio::action]] void.
• Added TABLE macro which is simply a shortcut for struct [[eosio::table]].
• Added CONTRACT macro which is simply a shortcut for class [[eosio::contract]].

CMake

• Added eosio.cdt-config.cmake to allow for find_package(eosio.cdt). See eosio.cdt/examples/hello or eosio.cdt/examples/template for an example.
• Added new macro add_contract. This new contract takes a contract name, cmake target, then any normal arguments you would give to add_executable. See eosio.cdt/examples/hello or eosio.cdt/examples/template.
• New version checking mechanism is included. See eosio.contracts/CMakeLists.txt to see this in use.

libc

• Replaced printf, sprintf, and snprintf with new minimal variants. This allows contracts to use these functions without causing stack overflow issues.

libcxx

• Removed sstream with the intent to return this after more has been done.
• Added __cxa_pure_virtual to allow for pure virtual methods in contract classes.
• std::to_string now works without the issues of stack overflows.

attributes

• Added [[eosio::ignore]] attribute to flag a type as being ignored by the deserializer. This attribute is primarily only used for internal use within eosiolib.
• Added [[eosio::contract]] attribute. This new attribute is used to mark a contract class as "contract" with the name being either the C++ name of the class or a user specified name (i.e. [[eosio::contract("somecontract")]]). This attribute can also be used in conjunction with the eosio::action and eosio::table attributes for tables that you would like to define outside of the eosio::contract class. This is used in conjunction with either the raw eosio-cpp option --contract <name>, -o <name>.wasm or with CMake add_contract. It acts as a filter enabling contract developers to include a header file with attributes from another contract (e.g. eosio.token) while generating an ABI devoid of those actions and tables.

  #include <eosiolib/eosio.hpp>
  using namespace eosio;
  CONTRACT test : public eosio::contract {
  public:
     using contract::contract;
     ACTION acta(){}
     TABLE taba {
        uint64_t a;
        float b;
        uint64_t primary_key() const { return a; }
     };
  };
  struct [[eosio::table, eosio::contract("test")]]
  tabb {
     uint64_t a;
     int b;
  };
  typedef eosio::multi_index<"testtaba"_n, test::taba> table_a;
  typedef eosio::multi_index<"testtabb"_n, tabb> table_b;
  EOSIO_DISPATCH( test, (acta) )

  The above code will produce the tables testtaba and testtabb in your ABI. Example: eosio-cpp -abigen test.cpp -o test.wasm will mark this compilation and ABI generation for the eosio::contract test. The same thing can be done with eosio-cpp -abigen test.cpp -o test_contract.wasm --contract test or with the CMake command add_contract( test, test_contract, test.cpp ). Either of the previous two approaches will produce a test_contract.wasm and test_contract.abi generated under the context of the contract name of test.

Boost

• Boost is now part of the library. No more external dependence on Boost and all system inclusion are within it's sysroot. (Boost will be removed in a future release.)

ABI generator attributes

Unlike the old ABI generator tool, the new tool uses C++11 or GNU style attributes to mark actions and tables.

[[eosio::action]]

This attribute marks either a struct or a method as an action. Example (four ways to declare an action for ABI generation):

// this is the C++11 and greater style attribute
[[eosio::action]]
void testa( name n ) {
   // do something
}

// this is the GNU style attribute, this can be used in C code and prior to C++ 11
__attribute__((eosio_action))
void testa( name n ){
   // do something
}

struct [[eosio::action]] testa {
   name n;
   EOSLIB_SERIALIZE( testa, (n) )
};

struct __attribute__((eosio_action)) testa {
   name n;
   EOSLIB_SERIALIZE( testa, (n) )
};

If your action name is not a valid EOSIO name you can explicitly specify the name in the attribute c++ [[eosio::action("<valid action name>")]]

Example (two ways to declare a table for ABI generation):

struct [[eosio::table]] testtable {
   uint64_t owner;
   /* all other fields */
};

struct __attribute__((eosio_table)) testtable {
   uint64_t owner;
   /* all other fields */
};

typedef eosio::multi_index<"tablename"_n, testtable> testtable_t;

If you don't want to use the multi-index you can explicitly specify the name in the attribute c++ [[eosio::table("<valid action name>")]].

For an example contract of ABI generation please see the file ./examples/abigen_test/test.cpp. You can generate the ABI for this file with eosio-abigen test.cpp --output=test.abi.

Fixing an ABI or Writing an ABI Manually

• The sections to the ABI are pretty simple to understand and the syntax is purely JSON, so it is reasonable to write an ABI file manually.
• The ABI generation will never be completely perfect for every contract written. Advanced features of the newest version of the ABI will require manual construction of the ABI, and odd and advanced C++ patterns could capsize the generators type deductions. So having a good knowledge of how to write an ABI should be an essential piece of knowledge of a smart contract writer.
• Please refer to developers.eos.io "How to Write an ABI File" to learn about the different sections of an ABI.

Installed Tools

---

• eosio-cpp
• eosio-cc
• eosio-ld
• eosio-abigen
• eosio-pp (post processing pass for WASM, automatically runs with eosio-cpp and eosio-ld)
• eosio-wasm2wast
• eosio-wast2wasm
• eosio-ranlib
• eosio-ar
• eosio-objdump
• eosio-readelf

Usage

---

To compile an EOSIO smart contract, the preferred method is to use the template CMakeLists.txt in the examples folder.

For example:

In CMakeLists.txt:

cmake_minimum_required(VERSION 3.5)
project(test_example VERSION 1.0.0)

find_package(eosio.cdt)

add_contract( test test test.cpp )

In test.cpp:

#include <eosiolib/eosio.hpp>
using namespace eosio;

CONTRACT test : public eosio::contract {
public:
   using contract::contract;

   ACTION testact( name test ) {
   }
};

EOSIO_DISPATCH( test, (testact) )

To manually compile the source code, use eosio-cpp/eosio-cc and eosio-ld as if it were clang and lld. All the includes and options specific to EOSIO and CDT are baked in.

eosio-cpp

---

OVERVIEW: eosio-cpp (Eosio C++ -> WebAssembly compiler)
USAGE: eosio-cpp [options] <input file> ...

OPTIONS:
  -C                       - Include comments in preprocessed output
  -CC                      - Include comments from within macros in preprocessed output
  -D=<string>              - Define <macro> to <value> (or 1 if <value> omitted)
  -E                       - Only run the preprocessor
  -I=<string>              - Add directory to include search path
  -L=<string>              - Add directory to library search path
  -O=<string>              - Optimization level s, 0-3
  -S                       - Only run preprocess and compilation steps
  -U=<string>              - Undefine macro <macro>
  -W=<string>              - Enable the specified warning
  -c                       - Only run preprocess, compile, and assemble steps
  -dD                      - Print macro definitions in -E mode in addition to normal output
  -dI                      - Print include directives in -E mode in addition to normal outpu
  -dM                      - Print macro definitions in -E mode instead to normal output
  -emit-ast                - Emit Clang AST files for source inputs
  -emit-llvm               - Use the LLVM representation for assembler and object files
  -faligned-allocation     - Enable C++17 aligned allocation functions
  -fcoroutine-ts           - Enable support for the C++ Coroutines TS
  -finline-functions       - Inline suitable functions
  -finline-hint-functions  - Inline functions which are (explicitly or implicitly) marked inline
  -fmerge-all-constants    - Allow merging of constants
  -fno-cfl-aa              - Disable CFL Alias Analysis
  -fno-elide-constructors  - Disable C++ copy constructor elision
  -fno-lto                 - Disable LTO
  -fstack-protector        - Enable stack protectors for functions potentially vulnerable to stack smashing
  -fstack-protector-all    - Force the usage of stack protectors for all functions
  -fstack-protector-strong - Use a strong heuristic to apply stack protectors to functions
  -fstrict-enums           - Enable optimizations based on the strict definition of an enum's value range
  -fstrict-return          - Always treat control flow paths that fall off the end of a non-void function as unreachable
  -fstrict-vtable-pointers - Enable optimizations based on the strict rules for overwriting polymorphic C++ objects
  -include=<string>        - Include file before parsing
  -isysroot=<string>       - Set the system root directory (usually /)
  -l=<string>              - Root name of library to link
  -lto-opt=<string>        - LTO Optimization level (O0-O3)
  -o=<string>              - Write output to <file>
  -std=<string>            - Language standard to compile for
  -v                       - Show commands to run and use verbose output
  -w                       - Suppress all warnings

Generic Options:

  -help                    - Display available options (-help-hidden for more)
  -help-list               - Display list of available options (-help-list-hidden for more)
  -version                 - Display the version of this program

eosio-ld

---

OVERVIEW: eosio-ld (WebAssembly linker)
USAGE: eosio-ld [options] <input file> ...

OPTIONS:

Generic Options:

  -help             - Display available options (-help-hidden for more)
  -help-list        - Display list of available options (-help-list-hidden for more)
  -version          - Display the version of this program

eosio.ld options:

  -L=<string>       - Add directory to library search path
  -fno-cfl-aa       - Disable CFL Alias Analysis
  -fno-lto          - Disable LTO
  -fno-post-pass    - Don't run post processing pass
  -fno-stack-first  - Don't set the stack first in memory
  -l=<string>       - Root name of library to link
  -lto-opt=<string> - LTO Optimization level (O0-O3)
  -o=<string>       - Write output to <file>

eosio-abigen

---

USAGE: eosio-abigen [options] <source0> [... <sourceN>]

OPTIONS:

Generic Options:

  -help                      - Display available options (-help-hidden for more)
  -help-list                 - Display list of available options (-help-list-hidden for more)
  -version                   - Display the version of this program

eosio-abigen:
generates an ABI from C++ project input

  -extra-arg=<string>        - Additional argument to append to the compiler command line
  -extra-arg-before=<string> - Additional argument to prepend to the compiler command line
  -output=<string>           - Set the output filename and fullpath
  -p=<string>                - Build path

License

MIT