Note: Make sure you have made the neccessary connections to the arduino and the sensors before you start with this project
Circuit Diagram
This Repository is about an Irrigation system that automates the entire workflow
Realtime sensor data will be displayed on the client side using Socket.io
All the details on how to setup the sensors is given in the "/bin/www" file
Components needed
| Name | Quantity | Component |
|---|---|---|
| R1 | 1 | Photoresistor |
| U1 | 1 | Arduino Uno R3 |
| R2 | 1 | 150 kΩ Resistor |
| Drelay | 1 | Red LED |
| RledResistor | 1 | 100 Ω Resistor |
| soil Moisture Sensor | 1 | sensor |
| Submersible Pump | 1 | Relay SPDT |
commands to run before you start
- Go to root directory of the project (i.e., IOT-Based-Smart-Irrigation-System/)
- Open the Terminal and type the below command(s)
npm i
- The above command will install certain dependencies, which might take some time depending on your internet
- To start the server use the following command
npm start