Skip to content

Library for sending OSC Messages using the analog inputs of Arduino boards. It is ment for use with jack-volume.

License

Notifications You must be signed in to change notification settings

voidseg/FaderOSC-Library

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

14 Commits
 
 
 
 
 
 
 
 
 
 

Repository files navigation

FaderOSC - Arduino Library

Library for sending OSC Messages using the analog inputs of Arduino boards. It was designed for using it with jack-volume.

The Idea

You may want to use a hardware unit for controlling some other hardware or software. This library turns your Arduino board into a fader panel sending OSC messages over ethernet and RS232. Originally i designed FaderOSC for the use with jack-volume to control the audio volume with a piece of hardware.

How It Works

FaderOSC reads the analog inputs of an Arduino board and transmits the values packed in OSC messages over ethernet and RS232. In theory an unlimited number of analog inputs are supported but at some point the performance will be unusable. Up to 8 faders should work properly.

Instead of connecting faders you can use other potentiometers or even analog sensors. Please have look at the Arduino potentiometer tutorial for how to wire up a poti to an Arduino board. All faders/potis must be connected this way to work with FaderOSC.

How To Install

This library does not work standalone because it makes use of the OSC library oscuino. Make sure to install oscuino too.

FaderOSC is installed the same way as other Arduino libraries. Download the files and copy them into a folder "FaderOSC" in your Arduino library folder. Read the Arduino documentation where to find the library folder. Then restart the Arduino IDE and you can import FaderOSC.

How To Use

It is highly recommended to copy the example sketch and modify it for your needs. Note that it is important to include SPI.h, Ethernet.h and SLIPEncodedSerial.h in your sketch before including FaderOSC.h. To configure the OSC address you have to define the string constant OSC_ADDRESS BEFORE including FaderOSC.h.

The number of faders / analog pins to use must be configured in the angle brackets behind the class name at the object declaration. E. g.: static FaderOSC<3> faderosc;

The addresses of all OSC messages contain a fixed prefix, a fader specific suffix and a float value between 0.0 and 1.0 (including) representing the analog value. E. g.:

prefix suffix value
"/faderosc/" "2" 0.42

Although FaderOSC was built to control jack-volume you can send OSC messages to other targets like DMXControl or the refrigerator of your choise. This software comes without any warranty!

About

Library for sending OSC Messages using the analog inputs of Arduino boards. It is ment for use with jack-volume.

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages