[lineage-17.1] October ASB #11

derfelot · 2020-10-09T16:18:10Z

Merged Linux 4.4.238
Added fix for CVE-2020-0423 from October ASB

commit 37bd224 upstream. In pfkey_dump() dplen and splen can both be specified to access the xfrm_address_t structure out of bounds in__xfrm_state_filter_match() when it calls addr_match() with the indexes. Return EINVAL if either are out of range. Signed-off-by: Mark Salyzyn <salyzyn@android.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: kernel-team@android.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f658866 ] when kmalloc() fails in kvm_io_bus_unregister_dev(), before removing the bus, we should iterate over all other devices linked to it and call kvm_iodevice_destructor() for them Fixes: 90db104 ("KVM: kvm_io_bus_unregister_dev() should never fail") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f196caa45793d6374707@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=f196caa45793d6374707 Signed-off-by: Rustam Kovhaev <rkovhaev@gmail.com> Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20200907185535.233114-1-rkovhaev@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b039909 ] If a kprobe is marked as gone, we should not kill it again. Otherwise, we can disarm the kprobe more than once. In that case, the statistics of kprobe_ftrace_enabled can unbalance which can lead to that kprobe do not work. Fixes: e8386a0 ("kprobes: support probing module __exit function") Co-developed-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Song Liu <songliubraving@fb.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200822030055.32383-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8a224ff ] When module loaded and enabled, we will use __ftrace_replace_code for module if any ftrace_ops referenced it found. But we will get wrong ftrace_addr for module rec in ftrace_get_addr_new, because rec->flags has not been setup correctly. It can cause the callback function of a ftrace_ops has FTRACE_OPS_FL_SAVE_REGS to be called with pt_regs set to NULL. So setup correct FTRACE_FL_REGS flags for rec when we call referenced_filters to find ftrace_ops references it. Link: https://lkml.kernel.org/r/20200728180554.65203-1-zhouchengming@bytedance.com Cc: stable@vger.kernel.org Fixes: 8c4f3c3 ("ftrace: Check module functions being traced on reload") Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com> Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit ef95a90 upstream. Validating input parameters should be done before getting the cm_id otherwise it can leak a cm_id reference. Fixes: 6a21dfc ("RDMA/ucma: Limit possible option size") Signed-off-by: Shamir Rabinovitch <shamir.rabinovitch@oracle.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> [iwamatsu: Backported to 4.4, 4.9 and 4.14: adjust context] Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit ea739a2 upstream. Commit 9e343e8 ("mtd: cfi: convert inline functions to macros") changed map_word_andequal() into a macro, but also changed the right hand side of the comparison from val3 to val2. Change it back to use val3 on the right hand side. Thankfully this did not cause a regression because all callers currently pass the same argument for val2 and val3. Fixes: 9e343e8 ("mtd: cfi: convert inline functions to macros") Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Nobuhiro Iwamatsu (CIP) <noburhio1.nobuhiro@toshiba.co.jp> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 66d42ed ] There are a couple bugs here: 1) If opt[1] is zero then this results in a forever loop. If the value is less than 2 then it is invalid. 2) It assumes that "len" is more than sizeof(valid_accm) or 6 which can result in memory corruption. In the case of LCP_OPTION_ACCM, then we should check "opt[1]" instead of "len" because, if "opt[1]" is less than sizeof(valid_accm) then "nak_len" gets out of sync and it can lead to memory corruption in the next iterations through the loop. In case of LCP_OPTION_MAGIC, the only valid value for opt[1] is 6, but the code is trying to log invalid data so we should only discard the data when "len" is less than 6 because that leads to a read overflow. Reported-by: ChenNan Of Chaitin Security Research Lab <whutchennan@gmail.com> Fixes: e022c2f ("WAN: new synchronous PPP implementation for generic HDLC.") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ff48b62 ] In tipc_buf_append() it may change skb's frag_list, and it causes problems when this skb is cloned. skb_unclone() doesn't really make this skb's flag_list available to change. Shuang Li has reported an use-after-free issue because of this when creating quite a few macvlan dev over the same dev, where the broadcast packets will be cloned and go up to the stack: [ ] BUG: KASAN: use-after-free in pskb_expand_head+0x86d/0xea0 [ ] Call Trace: [ ] dump_stack+0x7c/0xb0 [ ] print_address_description.constprop.7+0x1a/0x220 [ ] kasan_report.cold.10+0x37/0x7c [ ] check_memory_region+0x183/0x1e0 [ ] pskb_expand_head+0x86d/0xea0 [ ] process_backlog+0x1df/0x660 [ ] net_rx_action+0x3b4/0xc90 [ ] [ ] Allocated by task 1786: [ ] kmem_cache_alloc+0xbf/0x220 [ ] skb_clone+0x10a/0x300 [ ] macvlan_broadcast+0x2f6/0x590 [macvlan] [ ] macvlan_process_broadcast+0x37c/0x516 [macvlan] [ ] process_one_work+0x66a/0x1060 [ ] worker_thread+0x87/0xb10 [ ] [ ] Freed by task 3253: [ ] kmem_cache_free+0x82/0x2a0 [ ] skb_release_data+0x2c3/0x6e0 [ ] kfree_skb+0x78/0x1d0 [ ] tipc_recvmsg+0x3be/0xa40 [tipc] So fix it by using skb_unshare() instead, which would create a new skb for the cloned frag and it'll be safe to change its frag_list. The similar things were also done in sctp_make_reassembled_event(), which is using skb_copy(). Reported-by: Shuang Li <shuali@redhat.com> Fixes: 37e2216 ("tipc: rename and move message reassembly function") Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 4a009cb ] skb_put_padto() and __skb_put_padto() callers must check return values or risk use-after-free. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit ba9e04a ] Currently, in tcp_v4_reqsk_send_ack() and tcp_v4_send_reset(), we echo the TOS value of the received packets in the response. However, we do not want to echo the lower 2 ECN bits in accordance with RFC 3168 6.1.5 robustness principles. Fixes: 1da177e ("Linux-2.6.12-rc2") Signed-off-by: Wei Wang <weiwan@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e0a851f upstream. If the call to uart_add_one_port() in serial8250_register_8250_port() fails, a half-initialized entry in the serial_8250ports[] array is left behind. A subsequent reprobe of the same serial port causes that entry to be reused. Because uart->port.dev is set, uart_remove_one_port() is called for the half-initialized entry and bails out with an error message: bcm2835-aux-uart 3f215040.serial: Removing wrong port: (null) != (ptrval) The same happens on failure of mctrl_gpio_init() since commit 4a96895 ("tty/serial/8250: use mctrl_gpio helpers"). Fix by zeroing the uart->port.dev pointer in the probe error path. The bug was introduced in v2.6.10 by historical commit befff6f5bf5f ("[SERIAL] Add new port registration/unregistration functions."): https://git.kernel.org/tglx/history/c/befff6f5bf5f The commit added an unconditional call to uart_remove_one_port() in serial8250_register_port(). In v3.7, commit 835d844 ("8250_pnp: do pnp probe before legacy probe") made that call conditional on uart->port.dev which allows me to fix the issue by zeroing that pointer in the error path. Thus, the present commit will fix the problem as far back as v3.7 whereas still older versions need to also cherry-pick 835d844. Fixes: 835d844 ("8250_pnp: do pnp probe before legacy probe") Signed-off-by: Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v2.6.10 Cc: stable@vger.kernel.org # v2.6.10: 835d844: 8250_pnp: do pnp probe before legacy Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/b4a072013ee1a1d13ee06b4325afb19bda57ca1b.1589285873.git.lukas@wunner.de [iwamatsu: Backported to 4.4, 4.9: adjust context] Signed-off-by: Nobuhiro Iwamatsu (CIP) <nobuhiro1.iwamatsu@toshiba.co.jp> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c86fbe4 ] The driver fails to handle data when read or written beyond device reported LBA, which triggers kernel panic Link: https://lore.kernel.org/r/1571120524-6037-2-git-send-email-balsundar.p@microsemi.com Signed-off-by: Balsundar P <balsundar.p@microsemi.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7cf78b6 ] When the option is RTC_PLL_GET, pll will be copied to userland via copy_to_user. pll is initialized using mach_get_rtc_pll indirect call and mach_get_rtc_pll is only assigned with function q40_get_rtc_pll in arch/m68k/q40/config.c. In function q40_get_rtc_pll, the field pll_ctrl is not initialized. This will leak uninitialized stack content to userland. Fix this by zeroing the uninitialized field. Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Link: https://lore.kernel.org/r/20190927121544.7650-1-huangfq.daxian@gmail.com Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 57a25a5 ] `best_clock` is an object that may be sent out. Object `clock` contains uninitialized bytes that are copied to `best_clock`, which leads to memory disclosure and information leak. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20191018042953.31099-1-kjlu@umn.edu Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 175fc92 ] Propagate the error code from request_irq(), rather than returning -EBUSY. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/E1iNIqh-0000tW-EZ@rmk-PC.armlinux.org.uk Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 53b4b2a ] There is another kHz-conversion bug in the code, resulting in integer overflow. Although, this time the resulting value is 4294966296 and it's close to ULONG_MAX, which is okay in this case. Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com> Tested-by: Peter Geis <pgwipeout@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…d_setup() [ Upstream commit 03976af ] Else there may be a double-free problem, because cfi->cfiq will be freed by mtd_do_chip_probe() if both the two invocations of check_cmd_set() return failure. Signed-off-by: Hou Tao <houtao1@huawei.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b195e10 ] If a child device calls mfd_cell_{en,dis}able() without an appropriate call-back being set, we are likely to encounter a panic. Avoid this by adding suitable checking. Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Daniel Thompson <daniel.thompson@linaro.org> Reviewed-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 953ae45 ] As part of commit f45d122 ("tracing: Kernel access to Ftrace instances") we exported certain functions. Here, we are adding some additional NULL checks to ensure safe usage by users of these APIs. Link: http://lkml.kernel.org/r/1565805327-579-4-git-send-email-divya.indi@oracle.com Signed-off-by: Divya Indi <divya.indi@oracle.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 34cf78b ] This patch fix a lost wake-up problem caused by the race between mca_cannibalize_lock and bch_cannibalize_unlock. Consider two processes, A and B. Process A is executing mca_cannibalize_lock, while process B takes c->btree_cache_alloc_lock and is executing bch_cannibalize_unlock. The problem happens that after process A executes cmpxchg and will execute prepare_to_wait. In this timeslice process B executes wake_up, but after that process A executes prepare_to_wait and set the state to TASK_INTERRUPTIBLE. Then process A goes to sleep but no one will wake up it. This problem may cause bcache device to dead. Signed-off-by: Guoju Fang <fangguoju@gmail.com> Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 2a2b593 ] The leaf format xattr addition helper xfs_attr3_leaf_add_work() adjusts the block freemap in a couple places. The first update drops the size of the freemap that the caller had already selected to place the xattr name/value data. Before the function returns, it also checks whether the entries array has encroached on a freemap range by virtue of the new entry addition. This is necessary because the entries array grows from the start of the block (but end of the block header) towards the end of the block while the name/value data grows from the end of the block in the opposite direction. If the associated freemap is already empty, however, size is zero and the subtraction underflows the field and causes corruption. This is reproduced rarely by generic/070. The observed behavior is that a smaller sized freemap is aligned to the end of the entries list, several subsequent xattr additions land in larger freemaps and the entries list expands into the smaller freemap until it is fully consumed and then underflows. Note that it is not otherwise a corruption for the entries array to consume an empty freemap because the nameval list (i.e. the firstused pointer in the xattr header) starts beyond the end of the corrupted freemap. Update the freemap size modification to account for the fact that the freemap entry can be empty and thus stale. Signed-off-by: Brian Foster <bfoster@redhat.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5e1aada ] Initialization is not guaranteed to zero padding bytes so use an explicit memset instead to avoid leaking any kernel content in any possible padding bytes. Link: http://lkml.kernel.org/r/dfa331c00881d61c8ee51577a082d8bebd61805c.camel@perches.com Signed-off-by: Joe Perches <joe@perches.com> Cc: Dan Carpenter <error27@gmail.com> Cc: Julia Lawall <julia.lawall@lip6.fr> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Kees Cook <keescook@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1e3f9f0 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a3ea867 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bf07132 ] This patch proposes to require marked atomic accesses surrounding raw_write_seqcount_barrier. We reason that otherwise there is no way to guarantee propagation nor atomicity of writes before/after the barrier [1]. For example, consider the compiler tears stores either before or after the barrier; in this case, readers may observe a partial value, and because readers are unaware that writes are going on (writes are not in a seq-writer critical section), will complete the seq-reader critical section while having observed some partial state. [1] https://lwn.net/Articles/793253/ This came up when designing and implementing KCSAN, because KCSAN would flag these accesses as data-races. After careful analysis, our reasoning as above led us to conclude that the best thing to do is to propose an amendment to the raw_seqcount_barrier usage. Signed-off-by: Marco Elver <elver@google.com> Acked-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Paul E. McKenney <paulmck@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3df663a ] There is a race condition in acpi_ec_get_query_handler() theoretically allowing query handlers to go away before refernce counting them. In order to avoid it, call kref_get() on query handlers under ec->mutex. Also simplify the code a bit while at it. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit cbc3b92 ] I noticed when trying to use the trace-cmd python interface that reading the raw buffer wasn't working for kernel_stack events. This is because it uses a stubbed version of __dynamic_array that doesn't do the __data_loc trick and encode the length of the array into the field. Instead it just shows up as a size of 0. So change this to __array and set the len to FTRACE_STACK_ENTRIES since this is what we actually do in practice and matches how user_stack_trace works. Link: http://lkml.kernel.org/r/1411589652-1318-1-git-send-email-jbacik@fb.com Signed-off-by: Josef Bacik <jbacik@fb.com> [ Pulled from the archeological digging of my INBOX ] Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5b36249 ] Add the required USB ID for running SMCWUSBT-G2 wireless adapter (SMC "EZ Connect g"). This device uses ar5523 chipset and requires firmware to be loaded. Even though pid of the device is 4507, this patch adds it as 4506 so that AR5523_DEVICE_UG macro can set the AR5523_FLAG_PRE_FIRMWARE flag for pid 4507. Signed-off-by: Mert Dirik <mertdirik@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6c08fc8 ] There is no lock preventing both l2cap_sock_release() and chan->ops->close() from running at the same time. If we consider Thread A running l2cap_chan_timeout() and Thread B running l2cap_sock_release(), expected behavior is: A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb() A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill() B::l2cap_sock_release()->sock_orphan() B::l2cap_sock_release()->l2cap_sock_kill() where, sock_orphan() clears "sk->sk_socket" and l2cap_sock_teardown_cb() marks socket as SOCK_ZAPPED. In l2cap_sock_kill(), there is an "if-statement" that checks if both sock_orphan() and sock_teardown() has been run i.e. sk->sk_socket is NULL and socket is marked as SOCK_ZAPPED. Socket is killed if the condition is satisfied. In the race condition, following occurs: A::l2cap_chan_timeout()->l2cap_chan_close()->l2cap_sock_teardown_cb() B::l2cap_sock_release()->sock_orphan() B::l2cap_sock_release()->l2cap_sock_kill() A::l2cap_chan_timeout()->l2cap_sock_close_cb()->l2cap_sock_kill() In this scenario, "if-statement" is true in both B::l2cap_sock_kill() and A::l2cap_sock_kill() and we hit "refcount: underflow; use-after-free" bug. Similar condition occurs at other places where teardown/sock_kill is happening: l2cap_disconnect_rsp()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_disconnect_rsp()->l2cap_sock_close_cb()->l2cap_sock_kill() l2cap_conn_del()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_conn_del()->l2cap_sock_close_cb()->l2cap_sock_kill() l2cap_disconnect_req()->l2cap_chan_del()->l2cap_sock_teardown_cb() l2cap_disconnect_req()->l2cap_sock_close_cb()->l2cap_sock_kill() l2cap_sock_cleanup_listen()->l2cap_chan_close()->l2cap_sock_teardown_cb() l2cap_sock_cleanup_listen()->l2cap_sock_kill() Protect teardown/sock_kill and orphan/sock_kill by adding hold_lock on l2cap channel to ensure that the socket is killed only after marked as zapped and orphan. Signed-off-by: Manish Mandlik <mmandlik@google.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c02a987 ] If walk_pte_range() is called with a 'end' argument that is beyond the last page of memory (e.g. ~0UL) then the comparison between 'addr' and 'end' will always fail and the loop will be infinite. Instead change the comparison to >= while accounting for overflow. Link: http://lkml.kernel.org/r/20191218162402.45610-15-steven.price@arm.com Signed-off-by: Steven Price <steven.price@arm.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Alexandre Ghiti <alex@ghiti.fr> Cc: Andy Lutomirski <luto@kernel.org> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David S. Miller <davem@davemloft.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: James Hogan <jhogan@kernel.org> Cc: James Morse <james.morse@arm.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: "Liang, Kan" <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Burton <paul.burton@mips.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Zong Li <zong.li@sifive.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 097930e ] It seems that due to a copy & paste error the void pointer in batadv_choose_backbone_gw() is cast to the wrong type. Fixing this by using "struct batadv_bla_backbone_gw" instead of "struct batadv_bla_claim" which better matches the caller's side. For now it seems that we were lucky because the two structs both have their orig/vid and addr/vid in the beginning. However I stumbled over this issue when I was trying to add some debug variables in front of "orig" in batadv_backbone_gw, which caused hash lookups to fail. Fixes: 07568d0 ("batman-adv: don't rely on positions in struct for hashing") Signed-off-by: Linus Lüssing <ll@simonwunderlich.de> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c2b9478 ] eni_init_one() misses to call pci_disable_device() in an error path. Jump to err_disable to fix it. Fixes: ede58ef ("atm: remove deprecated use of pci api") Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7dda5b3 ] The unicast packet rerouting code makes several assumptions. For instance it assumes that there is always exactly one destination in the TT. This breaks for multicast frames in a unicast packets in several ways: For one thing if there is actually no TT entry and the destination node was selected due to the multicast tvlv flags it announced. Then an intermediate node will wrongly drop the packet. For another thing if there is a TT entry but the TTVN of this entry is newer than the originally addressed destination node: Then the intermediate node will wrongly redirect the packet, leading to duplicated multicast packets at a multicast listener and missing packets at other multicast listeners or multicast routers. Fixing this by not applying the unicast packet rerouting to batman-adv unicast packets with a multicast payload. We are not able to detect a roaming multicast listener at the moment and will just continue to send the multicast frame to both the new and old destination for a while in case of such a roaming multicast listener. Fixes: a73105b ("batman-adv: improved client announcement mechanism") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 472eb39 ] clang static analysis flags this problem hpioctl.c:513:7: warning: Branch condition evaluates to a garbage value if (pci.ap_mem_base[idx]) { ^~~~~~~~~~~~~~~~~~~~ If there is a failure in the middle of the memory space loop, only some of the memory spaces need to be cleaned up. At the error handler, idx holds the number of successful memory spaces mapped. So rework the handler loop to use the old idx. There is a second problem, the memory space loop conditionally iomaps()/sets the mem_base so it is necessay to initize pci. Fixes: 719f82d ("ALSA: Add support of AudioScience ASI boards") Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20200913165230.17166-1-trix@redhat.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e393fbe ] Commit 442e14a ("MIPS: Add 1074K CPU support explicitly.") split 1074K from the 74K as an unique CPU type, while it missed to add the 'CPU_1074K' in __get_cpu_type(). So let's add it back. Fixes: 442e14a ("MIPS: Add 1074K CPU support explicitly.") Signed-off-by: Wei Li <liwei391@huawei.com> Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 97293de upstream. * allow NULL consw->con_scrolldelta (some consoles define an empty hook) * => remove empty hooks now * return value of consw->con_scrolldelta is never checked => make the function void * document consw->con_scrolldelta a bit Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Thomas Winischhofer <thomas@winischhofer.net> Cc: linux-usb@vger.kernel.org Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: linux-fbdev@vger.kernel.org Cc: linux-parisc@vger.kernel.org Cc: Ajay Kaher <akaher@vmware.com> [ for 4.4.y backport, only do the first change above, to prevent .con_scrolldelta from being called if not present - gregkh] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 3031313 upstream. Commit 0cb2f13 ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") fixed one bug but not completely fixed yet. If we run a kprobe_module.tc of ftracetest, kernel showed a warning as below. # ./ftracetest test.d/kprobe/kprobe_module.tc === Ftrace unit tests === [1] Kprobe dynamic event - probing module ... [ 22.400215] ------------[ cut here ]------------ [ 22.400962] Failed to disarm kprobe-ftrace at trace_printk_irq_work+0x0/0x7e [trace_printk] (-2) [ 22.402139] WARNING: CPU: 7 PID: 200 at kernel/kprobes.c:1091 __disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.403358] Modules linked in: trace_printk(-) [ 22.404028] CPU: 7 PID: 200 Comm: rmmod Not tainted 5.9.0-rc2+ whatawurst#66 [ 22.404870] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 22.406139] RIP: 0010:__disarm_kprobe_ftrace.isra.0+0x7e/0xa0 [ 22.406947] Code: 30 8b 03 eb c9 80 3d e5 09 1f 01 00 75 dc 49 8b 34 24 89 c2 48 c7 c7 a0 c2 05 82 89 45 e4 c6 05 cc 09 1f 01 01 e8 a9 c7 f0 ff <0f> 0b 8b 45 e4 eb b9 89 c6 48 c7 c7 70 c2 05 82 89 45 e4 e8 91 c7 [ 22.409544] RSP: 0018:ffffc90000237df0 EFLAGS: 00010286 [ 22.410385] RAX: 0000000000000000 RBX: ffffffff83066024 RCX: 0000000000000000 [ 22.411434] RDX: 0000000000000001 RSI: ffffffff810de8d3 RDI: ffffffff810de8d3 [ 22.412687] RBP: ffffc90000237e10 R08: 0000000000000001 R09: 0000000000000001 [ 22.413762] R10: 0000000000000000 R11: 0000000000000001 R12: ffff88807c478640 [ 22.414852] R13: ffffffff8235ebc0 R14: ffffffffa00060c0 R15: 0000000000000000 [ 22.415941] FS: 00000000019d48c0(0000) GS:ffff88807d7c0000(0000) knlGS:0000000000000000 [ 22.417264] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 22.418176] CR2: 00000000005bb7e3 CR3: 0000000078f7a000 CR4: 00000000000006a0 [ 22.419309] Call Trace: [ 22.419990] kill_kprobe+0x94/0x160 [ 22.420652] kprobes_module_callback+0x64/0x230 [ 22.421470] notifier_call_chain+0x4f/0x70 [ 22.422184] blocking_notifier_call_chain+0x49/0x70 [ 22.422979] __x64_sys_delete_module+0x1ac/0x240 [ 22.423733] do_syscall_64+0x38/0x50 [ 22.424366] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 22.425176] RIP: 0033:0x4bb81d [ 22.425741] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e0 ff ff ff f7 d8 64 89 01 48 [ 22.428726] RSP: 002b:00007ffc70fef008 EFLAGS: 00000246 ORIG_RAX: 00000000000000b0 [ 22.430169] RAX: ffffffffffffffda RBX: 00000000019d48a0 RCX: 00000000004bb81d [ 22.431375] RDX: 0000000000000000 RSI: 0000000000000880 RDI: 00007ffc70fef028 [ 22.432543] RBP: 0000000000000880 R08: 00000000ffffffff R09: 00007ffc70fef320 [ 22.433692] R10: 0000000000656300 R11: 0000000000000246 R12: 00007ffc70fef028 [ 22.434635] R13: 0000000000000000 R14: 0000000000000002 R15: 0000000000000000 [ 22.435682] irq event stamp: 1169 [ 22.436240] hardirqs last enabled at (1179): [<ffffffff810df542>] console_unlock+0x422/0x580 [ 22.437466] hardirqs last disabled at (1188): [<ffffffff810df19b>] console_unlock+0x7b/0x580 [ 22.438608] softirqs last enabled at (866): [<ffffffff81c0038e>] __do_softirq+0x38e/0x490 [ 22.439637] softirqs last disabled at (859): [<ffffffff81a00f42>] asm_call_on_stack+0x12/0x20 [ 22.440690] ---[ end trace 1e7ce7e1e4567276 ]--- [ 22.472832] trace_kprobe: This probe might be able to register after target module is loaded. Continue. This is because the kill_kprobe() calls disarm_kprobe_ftrace() even if the given probe is not enabled. In that case, ftrace_set_filter_ip() fails because the given probe point is not registered to ftrace. Fix to check the given (going) probe is enabled before invoking disarm_kprobe_ftrace(). Link: https://lkml.kernel.org/r/159888672694.1411785.5987998076694782591.stgit@devnote2 Fixes: 0cb2f13 ("kprobes: Fix NULL pointer dereference at kprobe_ftrace_handler") Cc: Ingo Molnar <mingo@kernel.org> Cc: "Naveen N . Rao" <naveen.n.rao@linux.ibm.com> Cc: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Cc: David Miller <davem@davemloft.net> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Chengming Zhou <zhouchengming@bytedance.com> Cc: stable@vger.kernel.org Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1e1b6d6 upstream. LLVM implemented a recent "libcall optimization" that lowers calls to `sprintf(dest, "%s", str)` where the return value is used to `stpcpy(dest, str) - dest`. This generally avoids the machinery involved in parsing format strings. `stpcpy` is just like `strcpy` except it returns the pointer to the new tail of `dest`. This optimization was introduced into clang-12. Implement this so that we don't observe linkage failures due to missing symbol definitions for `stpcpy`. Similar to last year's fire drill with: commit 5f074f3 ("lib/string.c: implement a basic bcmp") The kernel is somewhere between a "freestanding" environment (no full libc) and "hosted" environment (many symbols from libc exist with the same type, function signature, and semantics). As Peter Anvin notes, there's not really a great way to inform the compiler that you're targeting a freestanding environment but would like to opt-in to some libcall optimizations (see pr/47280 below), rather than opt-out. Arvind notes, -fno-builtin-* behaves slightly differently between GCC and Clang, and Clang is missing many __builtin_* definitions, which I consider a bug in Clang and am working on fixing. Masahiro summarizes the subtle distinction between compilers justly: To prevent transformation from foo() into bar(), there are two ways in Clang to do that; -fno-builtin-foo, and -fno-builtin-bar. There is only one in GCC; -fno-buitin-foo. (Any difference in that behavior in Clang is likely a bug from a missing __builtin_* definition.) Masahiro also notes: We want to disable optimization from foo() to bar(), but we may still benefit from the optimization from foo() into something else. If GCC implements the same transform, we would run into a problem because it is not -fno-builtin-bar, but -fno-builtin-foo that disables that optimization. In this regard, -fno-builtin-foo would be more future-proof than -fno-built-bar, but -fno-builtin-foo is still potentially overkill. We may want to prevent calls from foo() being optimized into calls to bar(), but we still may want other optimization on calls to foo(). It seems that compilers today don't quite provide the fine grain control over which libcall optimizations pseudo-freestanding environments would prefer. Finally, Kees notes that this interface is unsafe, so we should not encourage its use. As such, I've removed the declaration from any header, but it still needs to be exported to avoid linkage errors in modules. Reported-by: Sami Tolvanen <samitolvanen@google.com> Suggested-by: Andy Lavr <andy.lavr@gmail.com> Suggested-by: Arvind Sankar <nivedita@alum.mit.edu> Suggested-by: Joe Perches <joe@perches.com> Suggested-by: Kees Cook <keescook@chromium.org> Suggested-by: Masahiro Yamada <masahiroy@kernel.org> Suggested-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Nathan Chancellor <natechancellor@gmail.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200914161643.938408-1-ndesaulniers@google.com Link: https://bugs.llvm.org/show_bug.cgi?id=47162 Link: https://bugs.llvm.org/show_bug.cgi?id=47280 Link: ClangBuiltLinux/linux#1126 Link: https://man7.org/linux/man-pages/man3/stpcpy.3.html Link: https://pubs.opengroup.org/onlinepubs/9699919799/functions/stpcpy.html Link: https://reviews.llvm.org/D85963 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 2593758 upstream. Since we will return enum ata_completion_errors from qc_prep in the next patch, let's define AC_ERR_OK to mark the OK status. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 95364f3 upstream. In case a driver wants to return an error from qc_prep, return enum ata_completion_errors. sata_mv is one of those drivers -- see the next patch. Other drivers return the newly defined AC_ERR_OK. [v2] use enum ata_completion_errors and AC_ERR_OK. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e9f691d upstream. There are several reports that the BUG_ON on unsupported command in mv_qc_prep can be triggered under some circumstances: https://bugzilla.suse.com/show_bug.cgi?id=1110252 https://serverfault.com/questions/888897/raid-problems-after-power-outage https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1652185 https://bugs.centos.org/view.php?id=14998 Let sata_mv handle the failure gracefully: warn about that incl. the failed command number and return an AC_ERR_INVALID error. We can do that now thanks to the previous patch. Remove also the long-standing FIXME. [v2] use %.2x as commands are defined as hexa. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: linux-ide@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Link: https://lore.kernel.org/r/20200929105928.198942536@linuxfoundation.org Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Changes in 4.4.238: (86 commits) af_key: pfkey_dump needs parameter validation KVM: fix memory leak in kvm_io_bus_unregister_dev() kprobes: fix kill kprobe which has been marked as gone ftrace: Setup correct FTRACE_FL_REGS flags for module RDMA/ucma: ucma_context reference leak in error path mtd: Fix comparison in map_word_andequal() hdlc_ppp: add range checks in ppp_cp_parse_cr() tipc: use skb_unshare() instead in tipc_buf_append() net: add __must_check to skb_put_padto() ip: fix tos reflection in ack and reset packets serial: 8250: Avoid error message on reprobe scsi: aacraid: fix illegal IO beyond last LBA m68k: q40: Fix info-leak in rtc_ioctl gma/gma500: fix a memory disclosure bug due to uninitialized bytes ASoC: kirkwood: fix IRQ error handling PM / devfreq: tegra30: Fix integer overflow on CPU's freq max out mtd: cfi_cmdset_0002: don't free cfi->cfiq in error path of cfi_amdstd_setup() mfd: mfd-core: Protect against NULL call-back function pointer tracing: Adding NULL checks for trace_array descriptor pointer bcache: fix a lost wake-up problem caused by mca_cannibalize_lock xfs: fix attr leaf header freemap.size underflow kernel/sys.c: avoid copying possible padding bytes in copy_to_user neigh_stat_seq_next() should increase position index rt_cpu_seq_next should increase position index seqlock: Require WRITE_ONCE surrounding raw_seqcount_barrier ACPI: EC: Reference count query handlers under lock tracing: Set kernel_stack's caller size properly ar5523: Add USB ID of SMCWUSBT-G2 wireless adapter Bluetooth: Fix refcount use-after-free issue mm: pagewalk: fix termination condition in walk_pte_range() Bluetooth: prefetch channel before killing sock skbuff: fix a data race in skb_queue_len() audit: CONFIG_CHANGE don't log internal bookkeeping as an event selinux: sel_avc_get_stat_idx should increase position index scsi: lpfc: Fix RQ buffer leakage when no IOCBs available drm/omap: fix possible object reference leak dmaengine: tegra-apb: Prevent race conditions on channel's freeing media: go7007: Fix URB type for interrupt handling Bluetooth: guard against controllers sending zero'd events drm/amdgpu: increase atombios cmd timeout Bluetooth: L2CAP: handle l2cap config request during open state media: tda10071: fix unsigned sign extension overflow tpm: ibmvtpm: Wait for buffer to be set before proceeding tracing: Use address-of operator on section symbols serial: 8250_omap: Fix sleeping function called from invalid context during probe SUNRPC: Fix a potential buffer overflow in 'svc_print_xprts()' ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len ALSA: usb-audio: Fix case when USB MIDI interface has more than one extra endpoint descriptor mm/filemap.c: clear page error before actual read mm/mmap.c: initialize align_offset explicitly for vm_unmapped_area KVM: Remove CREATE_IRQCHIP/SET_PIT2 race bdev: Reduce time holding bd_mutex in sync in blkdev_close() drivers: char: tlclk.c: Avoid data race between init and interrupt handler dt-bindings: sound: wm8994: Correct required supplies based on actual implementaion atm: fix a memory leak of vcc->user_back phy: samsung: s5pv210-usb2: Add delay after reset Bluetooth: Handle Inquiry Cancel error after Inquiry Complete USB: EHCI: ehci-mv: fix error handling in mv_ehci_probe() tty: serial: samsung: Correct clock selection logic ALSA: hda: Fix potential race in unsol event handler fuse: don't check refcount after stealing page USB: EHCI: ehci-mv: fix less than zero comparison of an unsigned int e1000: Do not perform reset in reset_task if we are already down printk: handle blank console arguments passed in. vfio/pci: fix memory leaks of eventfd ctx perf kcore_copy: Fix module map when there are no modules loaded mtd: rawnand: omap_elm: Fix runtime PM imbalance on error ceph: fix potential race in ceph_check_caps mtd: parser: cmdline: Support MTD names containing one or more colons x86/speculation/mds: Mark mds_user_clear_cpu_buffers() __always_inline vfio/pci: Clear error and request eventfd ctx after releasing vfio/pci: fix racy on error and request eventfd ctx s390/init: add missing __init annotations mwifiex: Increase AES key storage size to 256 bits batman-adv: bla: fix type misuse for backbone_gw hash indexing atm: eni: fix the missed pci_disable_device() for eni_init_one() batman-adv: mcast/TT: fix wrongly dropped or rerouted packets ALSA: asihpi: fix iounmap in error handler MIPS: Add the missing 'CPU_1074K' into __get_cpu_type() tty: vt, consw->con_scrolldelta cleanup kprobes: Fix to check probe enabled before disarm_kprobe_ftrace() lib/string.c: implement stpcpy ata: define AC_ERR_OK ata: make qc_prep return ata_completion_errors ata: sata_mv, avoid trigerrable BUG_ON Linux 4.4.238

When releasing a thread todo list when tearing down a binder_proc, the following race was possible which could result in a use-after-free: 1. Thread 1: enter binder_release_work from binder_thread_release 2. Thread 2: binder_update_ref_for_handle() calls binder_dec_node_ilocked() 3. Thread 2: dec nodeA --> 0 (will free node) 4. Thread 1: ACQ inner_proc_lock 5. Thread 2: block on inner_proc_lock 6. Thread 1: dequeue work (BINDER_WORK_NODE, part of nodeA) 7. Thread 1: REL inner_proc_lock 8. Thread 2: ACQ inner_proc_lock 9. Thread 2: todo list cleanup, but work was already dequeued 10. Thread 2: free node 11. Thread 2: REL inner_proc_lock 12. Thread 1: deref w->type (UAF) The problem was that for a BINDER_WORK_NODE, the binder_work element must not be accessed after releasing the inner_proc_lock while processing the todo list elements since another thread might be handling a deref on the node containing the binder_work element leading to the node being freed. Bug: 161151868 Signed-off-by: Todd Kjos <tkjos@google.com> Change-Id: I4ae752abfe1aa38872be6f266ddd271802952625 CVE-2020-0423

derfelot · 2020-10-09T16:19:25Z

All good for October ASB. No WireGuard update yet.

[ Upstream commit e24c644 ] I compiled with AddressSanitizer and I had these memory leaks while I was using the tep_parse_format function: Direct leak of 28 byte(s) in 4 object(s) allocated from: #0 0x7fb07db49ffe in __interceptor_realloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10dffe) whatawurst#1 0x7fb07a724228 in extend_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:985 whatawurst#2 0x7fb07a724c21 in __read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1140 whatawurst#3 0x7fb07a724f78 in read_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1206 whatawurst#4 0x7fb07a725191 in __read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1291 whatawurst#5 0x7fb07a7251df in read_expect_type /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1299 whatawurst#6 0x7fb07a72e6c8 in process_dynamic_array_len /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:2849 whatawurst#7 0x7fb07a7304b8 in process_function /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3161 whatawurst#8 0x7fb07a730900 in process_arg_token /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3207 whatawurst#9 0x7fb07a727c0b in process_arg /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:1786 whatawurst#10 0x7fb07a731080 in event_read_print_args /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3285 whatawurst#11 0x7fb07a731722 in event_read_print /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:3369 whatawurst#12 0x7fb07a740054 in __tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6335 whatawurst#13 0x7fb07a74047a in __parse_event /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6389 whatawurst#14 0x7fb07a740536 in tep_parse_format /home/pduplessis/repo/linux/tools/lib/traceevent/event-parse.c:6431 whatawurst#15 0x7fb07a785acf in parse_event ../../../src/fs-src/fs.c:251 whatawurst#16 0x7fb07a785ccd in parse_systems ../../../src/fs-src/fs.c:284 whatawurst#17 0x7fb07a786fb3 in read_metadata ../../../src/fs-src/fs.c:593 whatawurst#18 0x7fb07a78760e in ftrace_fs_source_init ../../../src/fs-src/fs.c:727 whatawurst#19 0x7fb07d90c19c in add_component_with_init_method_data ../../../../src/lib/graph/graph.c:1048 whatawurst#20 0x7fb07d90c87b in add_source_component_with_initialize_method_data ../../../../src/lib/graph/graph.c:1127 whatawurst#21 0x7fb07d90c92a in bt_graph_add_source_component ../../../../src/lib/graph/graph.c:1152 whatawurst#22 0x55db11aa632e in cmd_run_ctx_create_components_from_config_components ../../../src/cli/babeltrace2.c:2252 whatawurst#23 0x55db11aa6fda in cmd_run_ctx_create_components ../../../src/cli/babeltrace2.c:2347 whatawurst#24 0x55db11aa780c in cmd_run ../../../src/cli/babeltrace2.c:2461 whatawurst#25 0x55db11aa8a7d in main ../../../src/cli/babeltrace2.c:2673 whatawurst#26 0x7fb07d5460b2 in __libc_start_main (/lib/x86_64-linux-gnu/libc.so.6+0x270b2) The token variable in the process_dynamic_array_len function is allocated in the read_expect_type function, but is not freed before calling the read_token function. Free the token variable before calling read_token in order to plug the leak. Signed-off-by: Philippe Duplessis-Guindon <pduplessis@efficios.com> Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Link: https://lore.kernel.org/linux-trace-devel/20200730150236.5392-1-pduplessis@efficios.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit d26383d ] The following leaks were detected by ASAN: Indirect leak of 360 byte(s) in 9 object(s) allocated from: #0 0x7fecc305180e in calloc (/lib/x86_64-linux-gnu/libasan.so.5+0x10780e) whatawurst#1 0x560578f6dce5 in perf_pmu__new_format util/pmu.c:1333 whatawurst#2 0x560578f752fc in perf_pmu_parse util/pmu.y:59 whatawurst#3 0x560578f6a8b7 in perf_pmu__format_parse util/pmu.c:73 whatawurst#4 0x560578e07045 in test__pmu tests/pmu.c:155 whatawurst#5 0x560578de109b in run_test tests/builtin-test.c:410 whatawurst#6 0x560578de109b in test_and_print tests/builtin-test.c:440 whatawurst#7 0x560578de401a in __cmd_test tests/builtin-test.c:661 whatawurst#8 0x560578de401a in cmd_test tests/builtin-test.c:807 whatawurst#9 0x560578e49354 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:312 whatawurst#10 0x560578ce71a8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:364 whatawurst#11 0x560578ce71a8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:408 whatawurst#12 0x560578ce71a8 in main /home/namhyung/project/linux/tools/perf/perf.c:538 whatawurst#13 0x7fecc2b7acc9 in __libc_start_main ../csu/libc-start.c:308 Fixes: cff7f95 ("perf tests: Move pmu tests into separate object") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lore.kernel.org/lkml/20200915031819.386559-12-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit f03dca0c9e2297c84a018e306f8a9cd534ee4287 upstream. devm_regmap_init may return error which caused by like out of memory, this will results in null pointer dereference later when reading or writing register: general protection fault in encx24j600_spi_probe KASAN: null-ptr-deref in range [0x0000000000000090-0x0000000000000097] CPU: 0 PID: 286 Comm: spi-encx24j600- Not tainted 5.15.0-rc2-00142-g9978db750e31-dirty whatawurst#11 9c53a778c1306b1b02359f3c2bbedc0222cba652 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:regcache_cache_bypass drivers/base/regmap/regcache.c:540 Code: 54 41 89 f4 55 53 48 89 fb 48 83 ec 08 e8 26 94 a8 fe 48 8d bb a0 00 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 03 00 00 4c 8d ab b0 00 00 00 48 8b ab a0 00 RSP: 0018:ffffc900010476b8 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: fffffffffffffff4 RCX: 0000000000000000 RDX: 0000000000000012 RSI: ffff888002de0000 RDI: 0000000000000094 RBP: ffff888013c9a000 R08: 0000000000000000 R09: fffffbfff3f9cc6a R10: ffffc900010476e8 R11: fffffbfff3f9cc69 R12: 0000000000000001 R13: 000000000000000a R14: ffff888013c9af54 R15: ffff888013c9ad08 FS: 00007ffa984ab580(0000) GS:ffff88801fe00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055a6384136c8 CR3: 000000003bbe6003 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: encx24j600_spi_probe drivers/net/ethernet/microchip/encx24j600.c:459 spi_probe drivers/spi/spi.c:397 really_probe drivers/base/dd.c:517 __driver_probe_device drivers/base/dd.c:751 driver_probe_device drivers/base/dd.c:782 __device_attach_driver drivers/base/dd.c:899 bus_for_each_drv drivers/base/bus.c:427 __device_attach drivers/base/dd.c:971 bus_probe_device drivers/base/bus.c:487 device_add drivers/base/core.c:3364 __spi_add_device drivers/spi/spi.c:599 spi_add_device drivers/spi/spi.c:641 spi_new_device drivers/spi/spi.c:717 new_device_store+0x18c/0x1f1 [spi_stub 4e02719357f1ff33f5a43d00630982840568e85e] dev_attr_store drivers/base/core.c:2074 sysfs_kf_write fs/sysfs/file.c:139 kernfs_fop_write_iter fs/kernfs/file.c:300 new_sync_write fs/read_write.c:508 (discriminator 4) vfs_write fs/read_write.c:594 ksys_write fs/read_write.c:648 do_syscall_64 arch/x86/entry/common.c:50 entry_SYSCALL_64_after_hwframe arch/x86/entry/entry_64.S:113 Add error check in devm_regmap_init_encx24j600 to avoid this situation. Fixes: 04fbfce ("net: Microchip encx24j600 driver") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Nanyong Sun <sunnanyong@huawei.com> Link: https://lore.kernel.org/r/20211012125901.3623144-1-sunnanyong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit fcee5ce50bdb21116711e38635e3865594af907e ] When firmware load failed, kernel report task hung as follows: INFO: task xrun:5191 blocked for more than 147 seconds. Tainted: G W 5.16.0-rc5-next-20211220+ whatawurst#11 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:xrun state:D stack: 0 pid: 5191 ppid: 270 flags:0x00000004 Call Trace: __schedule+0xc12/0x4b50 kernel/sched/core.c:4986 schedule+0xd7/0x260 kernel/sched/core.c:6369 (discriminator 1) schedule_timeout+0x7aa/0xa80 kernel/time/timer.c:1857 wait_for_completion+0x181/0x290 kernel/sched/completion.c:85 lattice_ecp3_remove+0x32/0x40 drivers/misc/lattice-ecp3-config.c:221 spi_remove+0x72/0xb0 drivers/spi/spi.c:409 lattice_ecp3_remove() wait for signals from firmware loading, but when load failed, firmware_load() does not send this signal. This cause device remove hung. Fix it by sending signal even if load failed. Fixes: 781551d ("misc: Add Lattice ECP3 FPGA configuration via SPI") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Link: https://lore.kernel.org/r/20211228125522.3122284-1-weiyongjun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4224cfd7fb6523f7a9d1c8bb91bb5df1e38eb624 ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... whatawurst#9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 whatawurst#10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] whatawurst#11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] whatawurst#12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] whatawurst#13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] whatawurst#14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] whatawurst#15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] whatawurst#16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] whatawurst#17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 whatawurst#18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 whatawurst#19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 whatawurst#20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf whatawurst#21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 whatawurst#22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 whatawurst#23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 whatawurst#24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff whatawurst#25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f whatawurst#26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

Update to 4.4.299 and LA.UM.9.2.r1-03700-SDMxx0.0

[ Upstream commit 4224cfd7fb6523f7a9d1c8bb91bb5df1e38eb624 ] When bringing down the netdevice or system shutdown, a panic can be triggered while accessing the sysfs path because the device is already removed. [ 755.549084] mlx5_core 0000:12:00.1: Shutdown was called [ 756.404455] mlx5_core 0000:12:00.0: Shutdown was called ... [ 757.937260] BUG: unable to handle kernel NULL pointer dereference at (null) [ 758.031397] IP: [<ffffffff8ee11acb>] dma_pool_alloc+0x1ab/0x280 crash> bt ... PID: 12649 TASK: ffff8924108f2100 CPU: 1 COMMAND: "amsd" ... whatawurst#9 [ffff89240e1a38b0] page_fault at ffffffff8f38c778 [exception RIP: dma_pool_alloc+0x1ab] RIP: ffffffff8ee11acb RSP: ffff89240e1a3968 RFLAGS: 00010046 RAX: 0000000000000246 RBX: ffff89243d874100 RCX: 0000000000001000 RDX: 0000000000000000 RSI: 0000000000000246 RDI: ffff89243d874090 RBP: ffff89240e1a39c0 R8: 000000000001f080 R9: ffff8905ffc03c00 R10: ffffffffc04680d4 R11: ffffffff8edde9fd R12: 00000000000080d0 R13: ffff89243d874090 R14: ffff89243d874080 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 whatawurst#10 [ffff89240e1a39c8] mlx5_alloc_cmd_msg at ffffffffc04680f3 [mlx5_core] whatawurst#11 [ffff89240e1a3a18] cmd_exec at ffffffffc046ad62 [mlx5_core] whatawurst#12 [ffff89240e1a3ab8] mlx5_cmd_exec at ffffffffc046b4fb [mlx5_core] whatawurst#13 [ffff89240e1a3ae8] mlx5_core_access_reg at ffffffffc0475434 [mlx5_core] whatawurst#14 [ffff89240e1a3b40] mlx5e_get_fec_caps at ffffffffc04a7348 [mlx5_core] whatawurst#15 [ffff89240e1a3bb0] get_fec_supported_advertised at ffffffffc04992bf [mlx5_core] whatawurst#16 [ffff89240e1a3c08] mlx5e_get_link_ksettings at ffffffffc049ab36 [mlx5_core] whatawurst#17 [ffff89240e1a3ce8] __ethtool_get_link_ksettings at ffffffff8f25db46 whatawurst#18 [ffff89240e1a3d48] speed_show at ffffffff8f277208 whatawurst#19 [ffff89240e1a3dd8] dev_attr_show at ffffffff8f0b70e3 whatawurst#20 [ffff89240e1a3df8] sysfs_kf_seq_show at ffffffff8eedbedf whatawurst#21 [ffff89240e1a3e18] kernfs_seq_show at ffffffff8eeda596 whatawurst#22 [ffff89240e1a3e28] seq_read at ffffffff8ee76d10 whatawurst#23 [ffff89240e1a3e98] kernfs_fop_read at ffffffff8eedaef5 whatawurst#24 [ffff89240e1a3ed8] vfs_read at ffffffff8ee4e3ff whatawurst#25 [ffff89240e1a3f08] sys_read at ffffffff8ee4f27f whatawurst#26 [ffff89240e1a3f50] system_call_fastpath at ffffffff8f395f92 crash> net_device.state ffff89443b0c0000 state = 0x5 (__LINK_STATE_START| __LINK_STATE_NOCARRIER) To prevent this scenario, we also make sure that the netdevice is present. Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

…g the sock [ Upstream commit 3cf7203ca620682165706f70a1b12b5194607dce ] There is a race condition in vxlan that when deleting a vxlan device during receiving packets, there is a possibility that the sock is released after getting vxlan_sock vs from sk_user_data. Then in later vxlan_ecn_decapsulate(), vxlan_get_sk_family() we will got NULL pointer dereference. e.g. #0 [ffffa25ec6978a38] machine_kexec at ffffffff8c669757 whatawurst#1 [ffffa25ec6978a90] __crash_kexec at ffffffff8c7c0a4d whatawurst#2 [ffffa25ec6978b58] crash_kexec at ffffffff8c7c1c48 whatawurst#3 [ffffa25ec6978b60] oops_end at ffffffff8c627f2b whatawurst#4 [ffffa25ec6978b80] page_fault_oops at ffffffff8c678fcb whatawurst#5 [ffffa25ec6978bd8] exc_page_fault at ffffffff8d109542 whatawurst#6 [ffffa25ec6978c00] asm_exc_page_fault at ffffffff8d200b62 [exception RIP: vxlan_ecn_decapsulate+0x3b] RIP: ffffffffc1014e7b RSP: ffffa25ec6978cb0 RFLAGS: 00010246 RAX: 0000000000000008 RBX: ffff8aa000888000 RCX: 0000000000000000 RDX: 000000000000000e RSI: ffff8a9fc7ab803e RDI: ffff8a9fd1168700 RBP: ffff8a9fc7ab803e R8: 0000000000700000 R9: 00000000000010ae R10: ffff8a9fcb748980 R11: 0000000000000000 R12: ffff8a9fd1168700 R13: ffff8aa000888000 R14: 00000000002a0000 R15: 00000000000010ae ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 whatawurst#7 [ffffa25ec6978ce8] vxlan_rcv at ffffffffc10189cd [vxlan] whatawurst#8 [ffffa25ec6978d90] udp_queue_rcv_one_skb at ffffffff8cfb6507 whatawurst#9 [ffffa25ec6978dc0] udp_unicast_rcv_skb at ffffffff8cfb6e45 whatawurst#10 [ffffa25ec6978dc8] __udp4_lib_rcv at ffffffff8cfb8807 whatawurst#11 [ffffa25ec6978e20] ip_protocol_deliver_rcu at ffffffff8cf76951 whatawurst#12 [ffffa25ec6978e48] ip_local_deliver at ffffffff8cf76bde whatawurst#13 [ffffa25ec6978ea0] __netif_receive_skb_one_core at ffffffff8cecde9b whatawurst#14 [ffffa25ec6978ec8] process_backlog at ffffffff8cece139 whatawurst#15 [ffffa25ec6978f00] __napi_poll at ffffffff8ceced1a whatawurst#16 [ffffa25ec6978f28] net_rx_action at ffffffff8cecf1f3 whatawurst#17 [ffffa25ec6978fa0] __softirqentry_text_start at ffffffff8d4000ca whatawurst#18 [ffffa25ec6978ff0] do_softirq at ffffffff8c6fbdc3 Reproducer: https://github.com/Mellanox/ovs-tests/blob/master/test-ovs-vxlan-remove-tunnel-during-traffic.sh Fix this by waiting for all sk_user_data reader to finish before releasing the sock. Reported-by: Jianlin Shi <jishi@redhat.com> Suggested-by: Jakub Sitnicki <jakub@cloudflare.com> Fixes: 6a93cc9 ("udp-tunnel: Add a few more UDP tunnel APIs") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli+cip@fpond.eu>

[ Upstream commit 05bb0167c80b8f93c6a4e0451b7da9b96db990c2 ] ACPICA commit 770653e3ba67c30a629ca7d12e352d83c2541b1e Before this change we see the following UBSAN stack trace in Fuchsia: #0 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 whatawurst#1.2 0x000020d0f660777f in ubsan_get_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:41 <libclang_rt.asan.so>+0x3d77f whatawurst#1.1 0x000020d0f660777f in maybe_print_stack_trace() compiler-rt/lib/ubsan/ubsan_diag.cpp:51 <libclang_rt.asan.so>+0x3d77f whatawurst#1 0x000020d0f660777f in ~scoped_report() compiler-rt/lib/ubsan/ubsan_diag.cpp:387 <libclang_rt.asan.so>+0x3d77f whatawurst#2 0x000020d0f660b96d in handlepointer_overflow_impl() compiler-rt/lib/ubsan/ubsan_handlers.cpp:809 <libclang_rt.asan.so>+0x4196d whatawurst#3 0x000020d0f660b50d in compiler-rt/lib/ubsan/ubsan_handlers.cpp:815 <libclang_rt.asan.so>+0x4150d whatawurst#4 0x000021e4213b3302 in acpi_ds_init_aml_walk(struct acpi_walk_state*, union acpi_parse_object*, struct acpi_namespace_node*, u8*, u32, struct acpi_evaluate_info*, u8) ../../third_party/acpica/source/components/dispatcher/dswstate.c:682 <platform-bus-x86.so>+0x233302 whatawurst#5 0x000021e4213e2369 in acpi_ds_call_control_method(struct acpi_thread_state*, struct acpi_walk_state*, union acpi_parse_object*) ../../third_party/acpica/source/components/dispatcher/dsmethod.c:605 <platform-bus-x86.so>+0x262369 whatawurst#6 0x000021e421437fac in acpi_ps_parse_aml(struct acpi_walk_state*) ../../third_party/acpica/source/components/parser/psparse.c:550 <platform-bus-x86.so>+0x2b7fac whatawurst#7 0x000021e4214464d2 in acpi_ps_execute_method(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/parser/psxface.c:244 <platform-bus-x86.so>+0x2c64d2 whatawurst#8 0x000021e4213aa052 in acpi_ns_evaluate(struct acpi_evaluate_info*) ../../third_party/acpica/source/components/namespace/nseval.c:250 <platform-bus-x86.so>+0x22a052 whatawurst#9 0x000021e421413dd8 in acpi_ns_init_one_device(acpi_handle, u32, void*, void**) ../../third_party/acpica/source/components/namespace/nsinit.c:735 <platform-bus-x86.so>+0x293dd8 whatawurst#10 0x000021e421429e98 in acpi_ns_walk_namespace(acpi_object_type, acpi_handle, u32, u32, acpi_walk_callback, acpi_walk_callback, void*, void**) ../../third_party/acpica/source/components/namespace/nswalk.c:298 <platform-bus-x86.so>+0x2a9e98 whatawurst#11 0x000021e4214131ac in acpi_ns_initialize_devices(u32) ../../third_party/acpica/source/components/namespace/nsinit.c:268 <platform-bus-x86.so>+0x2931ac whatawurst#12 0x000021e42147c40d in acpi_initialize_objects(u32) ../../third_party/acpica/source/components/utilities/utxfinit.c:304 <platform-bus-x86.so>+0x2fc40d whatawurst#13 0x000021e42126d603 in acpi::acpi_impl::initialize_acpi(acpi::acpi_impl*) ../../src/devices/board/lib/acpi/acpi-impl.cc:224 <platform-bus-x86.so>+0xed603 Add a simple check that avoids incrementing a pointer by zero, but otherwise behaves as before. Note that our findings are against ACPICA 20221020, but the same code exists on master. Link: acpica/acpica@770653e3 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Ulrich Hecht <uli+cip@fpond.eu>

commit d21d40605bca7bd5fc23ef03d4c1ca1f48bc2cae upstream. syzkaller reported infinite recursive calls of fib6_dump_done() during netlink socket destruction. [1] From the log, syzkaller sent an AF_UNSPEC RTM_GETROUTE message, and then the response was generated. The following recvmmsg() resumed the dump for IPv6, but the first call of inet6_dump_fib() failed at kzalloc() due to the fault injection. [0] 12:01:34 executing program 3: r0 = socket$nl_route(0x10, 0x3, 0x0) sendmsg$nl_route(r0, ... snip ...) recvmmsg(r0, ... snip ...) (fail_nth: 8) Here, fib6_dump_done() was set to nlk_sk(sk)->cb.done, and the next call of inet6_dump_fib() set it to nlk_sk(sk)->cb.args[3]. syzkaller stopped receiving the response halfway through, and finally netlink_sock_destruct() called nlk_sk(sk)->cb.done(). fib6_dump_done() calls fib6_dump_end() and nlk_sk(sk)->cb.done() if it is still not NULL. fib6_dump_end() rewrites nlk_sk(sk)->cb.done() by nlk_sk(sk)->cb.args[3], but it has the same function, not NULL, calling itself recursively and hitting the stack guard page. To avoid the issue, let's set the destructor after kzalloc(). [0]: FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 CPU: 1 PID: 432110 Comm: syz-executor.3 Not tainted 6.8.0-12821-g537c2e91d354-dirty whatawurst#11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:117) should_fail_ex (lib/fault-inject.c:52 lib/fault-inject.c:153) should_failslab (mm/slub.c:3733) kmalloc_trace (mm/slub.c:3748 mm/slub.c:3827 mm/slub.c:3992) inet6_dump_fib (./include/linux/slab.h:628 ./include/linux/slab.h:749 net/ipv6/ip6_fib.c:662) rtnl_dump_all (net/core/rtnetlink.c:4029) netlink_dump (net/netlink/af_netlink.c:2269) netlink_recvmsg (net/netlink/af_netlink.c:1988) ____sys_recvmsg (net/socket.c:1046 net/socket.c:2801) ___sys_recvmsg (net/socket.c:2846) do_recvmmsg (net/socket.c:2943) __x64_sys_recvmmsg (net/socket.c:3041 net/socket.c:3034 net/socket.c:3034) [1]: BUG: TASK stack guard page was hit at 00000000f2fa9af1 (stack is 00000000b7912430..000000009a436beb) stack guard page: 0000 [whatawurst#1] PREEMPT SMP KASAN CPU: 1 PID: 223719 Comm: kworker/1:3 Not tainted 6.8.0-12821-g537c2e91d354-dirty whatawurst#11 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 Workqueue: events netlink_sock_destruct_work RIP: 0010:fib6_dump_done (net/ipv6/ip6_fib.c:570) Code: 3c 24 e8 f3 e9 51 fd e9 28 fd ff ff 66 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 f3 0f 1e fa 41 57 41 56 41 55 41 54 55 48 89 fd <53> 48 8d 5d 60 e8 b6 4d 07 fd 48 89 da 48 b8 00 00 00 00 00 fc ff RSP: 0018:ffffc9000d980000 EFLAGS: 00010293 RAX: 0000000000000000 RBX: ffffffff84405990 RCX: ffffffff844059d3 RDX: ffff8881028e0000 RSI: ffffffff84405ac2 RDI: ffff88810c02f358 RBP: ffff88810c02f358 R08: 0000000000000007 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000224 R12: 0000000000000000 R13: ffff888007c82c78 R14: ffff888007c82c68 R15: ffff888007c82c68 FS: 0000000000000000(0000) GS:ffff88811b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffc9000d97fff8 CR3: 0000000102309002 CR4: 0000000000770ef0 PKRU: 55555554 Call Trace: <#DF> </#DF> <TASK> fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) ... fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) fib6_dump_done (net/ipv6/ip6_fib.c:572 (discriminator 1)) netlink_sock_destruct (net/netlink/af_netlink.c:401) __sk_destruct (net/core/sock.c:2177 (discriminator 2)) sk_destruct (net/core/sock.c:2224) __sk_free (net/core/sock.c:2235) sk_free (net/core/sock.c:2246) process_one_work (kernel/workqueue.c:3259) worker_thread (kernel/workqueue.c:3329 kernel/workqueue.c:3416) kthread (kernel/kthread.c:388) ret_from_fork (arch/x86/kernel/process.c:153) ret_from_fork_asm (arch/x86/entry/entry_64.S:256) Modules linked in: Fixes: 1da177e ("Linux-2.6.12-rc2") Reported-by: syzkaller <syzkaller@googlegroups.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240401211003.25274-1-kuniyu@amazon.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Ulrich Hecht <uli@kernel.org>

[ Upstream commit f8bbc07ac535593139c875ffa19af924b1084540 ] vhost_worker will call tun call backs to receive packets. If too many illegal packets arrives, tun_do_read will keep dumping packet contents. When console is enabled, it will costs much more cpu time to dump packet and soft lockup will be detected. net_ratelimit mechanism can be used to limit the dumping rate. PID: 33036 TASK: ffff949da6f20000 CPU: 23 COMMAND: "vhost-32980" #0 [fffffe00003fce50] crash_nmi_callback at ffffffff89249253 whatawurst#1 [fffffe00003fce58] nmi_handle at ffffffff89225fa3 whatawurst#2 [fffffe00003fceb0] default_do_nmi at ffffffff8922642e whatawurst#3 [fffffe00003fced0] do_nmi at ffffffff8922660d whatawurst#4 [fffffe00003fcef0] end_repeat_nmi at ffffffff89c01663 [exception RIP: io_serial_in+20] RIP: ffffffff89792594 RSP: ffffa655314979e8 RFLAGS: 00000002 RAX: ffffffff89792500 RBX: ffffffff8af428a0 RCX: 0000000000000000 RDX: 00000000000003fd RSI: 0000000000000005 RDI: ffffffff8af428a0 RBP: 0000000000002710 R8: 0000000000000004 R9: 000000000000000f R10: 0000000000000000 R11: ffffffff8acbf64f R12: 0000000000000020 R13: ffffffff8acbf698 R14: 0000000000000058 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 whatawurst#5 [ffffa655314979e8] io_serial_in at ffffffff89792594 whatawurst#6 [ffffa655314979e8] wait_for_xmitr at ffffffff89793470 whatawurst#7 [ffffa65531497a08] serial8250_console_putchar at ffffffff897934f6 whatawurst#8 [ffffa65531497a20] uart_console_write at ffffffff8978b605 whatawurst#9 [ffffa65531497a48] serial8250_console_write at ffffffff89796558 whatawurst#10 [ffffa65531497ac8] console_unlock at ffffffff89316124 whatawurst#11 [ffffa65531497b10] vprintk_emit at ffffffff89317c07 whatawurst#12 [ffffa65531497b68] printk at ffffffff89318306 whatawurst#13 [ffffa65531497bc8] print_hex_dump at ffffffff89650765 whatawurst#14 [ffffa65531497ca8] tun_do_read at ffffffffc0b06c27 [tun] whatawurst#15 [ffffa65531497d38] tun_recvmsg at ffffffffc0b06e34 [tun] whatawurst#16 [ffffa65531497d68] handle_rx at ffffffffc0c5d682 [vhost_net] whatawurst#17 [ffffa65531497ed0] vhost_worker at ffffffffc0c644dc [vhost] whatawurst#18 [ffffa65531497f10] kthread at ffffffff892d2e72 whatawurst#19 [ffffa65531497f50] ret_from_fork at ffffffff89c0022f Fixes: ef3db4a ("tun: avoid BUG, dump packet on GSO errors") Signed-off-by: Lei Chen <lei.chen@smartx.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20240415020247.2207781-1-lei.chen@smartx.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> [uli: backport to 4.4] Signed-off-by: Ulrich Hecht <uli@kernel.org>

salyzyn and others added 30 commits October 1, 2020 11:11

T-X and others added 14 commits October 1, 2020 11:11

derfelot changed the title ~~[linme]~~ [lineage-17.1] October ASB Oct 9, 2020

derfelot merged commit 1bf50de into whatawurst:lineage-17.1 Oct 9, 2020

derfelot deleted the lineage-17.1_update branch October 9, 2020 19:12

Amy07i pushed a commit to Amy07i/android_kernel_sony_msm8998 that referenced this pull request Aug 14, 2022

Merge pull request whatawurst#11 from Flamefire/lineage-17.1-update

a6a8acd

Update to 4.4.299 and LA.UM.9.2.r1-03700-SDMxx0.0

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[lineage-17.1] October ASB #11

[lineage-17.1] October ASB #11

derfelot commented Oct 9, 2020 •

edited

Loading

derfelot commented Oct 9, 2020

[lineage-17.1] October ASB #11

[lineage-17.1] October ASB #11

Conversation

derfelot commented Oct 9, 2020 • edited Loading

derfelot commented Oct 9, 2020

derfelot commented Oct 9, 2020 •

edited

Loading