Initial Infineon I2C TPM support for Espressif ESP32

IDE/Espressif/CMakeLists.txt

@@ -0,0 +1,96 @@
+# wolfTPM Espressif Example Project CMakeLists.txt
+#   v1.0
+#
+# The following lines of boilerplate have to be in your project's
+# CMakeLists in this exact order for cmake to work correctly
+cmake_minimum_required(VERSION 3.16)
+
+# The wolfTPM CMake file should be able to find the source code.
+# Otherwise, assign an environment variable or set it here:
+#
+# set(WOLFTPM_ROOT "~/workspace/wolftpm-other-source")
+#
+# Optional WOLFSSL_CMAKE_SYSTEM_NAME detection to find
+# USE_MY_PRIVATE_CONFIG path for my_private_config.h
+#
+# Expected path varies:
+#
+#     WSL:  /mnt/c/workspace
+#   Linux:  ~/workspace
+# Windows:  C:\workspace
+#
+if(WIN32)
+    # Windows-specific configuration here
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_WINDOWS")
+    message("Detected Windows")
+endif()
+if(CMAKE_HOST_UNIX)
+    message("Detected UNIX")
+endif()
+if(APPLE)
+    message("Detected APPLE")
+endif()
+if(CMAKE_HOST_UNIX AND (NOT APPLE) AND EXISTS "/proc/sys/fs/binfmt_misc/WSLInterop")
+    # Windows-specific configuration here
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_WSL")
+    message("Detected WSL")
+endif()
+if(CMAKE_HOST_UNIX AND (NOT APPLE) AND (NOT WIN32))
+    # Windows-specific configuration here
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_LINUX")
+    message("Detected Linux")
+endif()
+if(APPLE)
+    # Windows-specific configuration here
+    set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -DWOLFSSL_CMAKE_SYSTEM_NAME_APPLE")
+    message("Detected Apple")
+endif()
+# End optional WOLFSSL_CMAKE_SYSTEM_NAME
+
+# Check that there are no conflicting wolfSSL components.
+#
+# The ESP Registry Component will be in ./managed_components/wolfssl__wolfssl
+# The local component wolfSSL directory will be in ./components/wolfssl
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl" AND EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolfssl" )
+    # These exclude statements don't seem to be honored by the $ENV{IDF_PATH}/tools/cmake/project.cmake'
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl" EXCLUDE_FROM_ALL)
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolfssl/include" EXCLUDE_FROM_ALL)
+    # So we'll error out and let the user decide how to proceed:
+    message(WARNING "\nFound wolfSSL components in\n"
+                    "./managed_components/wolfssl__wolfssl\n"
+                    "and\n"
+                    "./components/wolfssl\n"
+                    "in project directory: \n"
+                    "${CMAKE_HOME_DIRECTORY}")
+    message(FATAL_ERROR "\nPlease use either the ESP Registry Managed Component or the wolfSSL component directory but not both.\n"
+                        "If removing the ./managed_components/wolfssl__wolfssl directory, remember to also remove "
+                        "or rename the idf_component.yml file typically found in ./main/")
+else()
+    message(STATUS "No conflicting wolfSSL components found.")
+endif()
+
+# Check that there are no conflicting wolfTPM components.
+#
+# The ESP Registry Component will be in ./managed_components/wolfssl__wolftpm
+# The local component wolfTPM directory will be in ./components/wolftpm
+if( EXISTS "${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolftpm" AND EXISTS "${CMAKE_HOME_DIRECTORY}/components/wolftpm" )
+    # These exclude statements don't seem to be honored by the $ENV{IDF_PATH}/tools/cmake/project.cmake'
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolftpm" EXCLUDE_FROM_ALL)
+    # add_subdirectory("${CMAKE_HOME_DIRECTORY}/managed_components/wolfssl__wolftpm/include" EXCLUDE_FROM_ALL)
+    # So we'll error out and let the user decide how to proceed:
+    message(WARNING "\nFound wolfTPM components in\n"
+                    "./managed_components/wolfssl__wolftpm\n"
+                    "and\n"
+                    "./components/wolftpm\n"
+                    "in project directory: \n"
+                    "${CMAKE_HOME_DIRECTORY}")
+    message(FATAL_ERROR "\nPlease use either the ESP Registry Managed Component or the wolfTPM component directory but not both.\n"
+                        "If removing the ./managed_components/wolfssl__wolftpm directory, remember to also remove "
+                        "or rename the idf_component.yml file typically found in ./main/")
+else()
+    message(STATUS "No conflicting wolfTPM components found.")
+endif()
+
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+
+project(wolfTPM_test)

IDE/Espressif/README.md

@@ -0,0 +1,31 @@
+# wolfTPM for Espressif
+
+Initial minimum memory requirements: 35KB Stack. See `sdkconfig.defaults`.
+
+Current memory assigned: 50960
+
+## Pin assignments
+
+**Note:** The following pin assignments are used by default, you can change these in the `menuconfig` .
+
+|                  | SDA            | SCL            |
+| ---------------- | -------------- | -------------- |
+| ESP I2C Master   | I2C_MASTER_SDA | I2C_MASTER_SCL |
+| TPM2 Device      | SDA            | SCL            |
+
+For the actual default value of `I2C_MASTER_SDA` and `I2C_MASTER_SCL` see `Example Configuration` in `menuconfig`.
+
+**Note:** There's no need to add an external pull-up resistors for SDA/SCL pin, because the driver will enable the internal pull-up resistors.
+
+## Troubleshooting
+
+If problems are encountered with the I2C module:
+
+- Beware that printing to the UART during an I2C transaction may affect timing and cause errors.
+- Ensure the TPM module has been reset after flash updated.
+- Check wiring. `SCL` to `SCL`, `SDA` to `SDA`. Probably best to ensure GND is connected. Vcc is 3.3v only.
+- Ensure the proper pins are connected on the ESP32. SCL default is `GPIO 19`;  SDA default is `GPIO 18`.
+- Test with only a single I2C device before testing concurrent with other I2C boards.
+- When using multiple I2C boards, check for appropriate pullups. See data sheet.
+- Reset TPM device again. Press button on TPM SLB9673 eval board or set TPM pin 17 as appropriate.
+-