Skip to content

The following library is used for work with dimmer, it gives ability to control large ammoun of dimmer. This lib uses with Leonardo, Mega, UNO, ESP8266, ESP32, Arduino M0, Arduino Zero, Arduino Due, STM32.

Notifications You must be signed in to change notification settings

xlyric/RBDDimmer

 
 

Repository files navigation

Librairie updated for correct lot of bug of ISRAM with ESP8266 and compatible with VS

exemple of platformio.ini

[env:d1_mini]

platform = espressif8266

board = d1_mini

framework = arduino

monitor_speed = 115200

lib_deps = https://github.com/xlyric/RBDDimmer


Board INPUT Pin
Zero Cross
OUTPUT Pin
Leonardo D7 (NOT CHANGABLE) D0-D6, D8-D13
Mega D2 (NOT CHANGABLE) D0-D1, D3-D70
UNO
NANO
D2 (NOT CHANGABLE) D0-D1, D3-D20
ESP8266
  • D1(IO5)
  • D5(IO14)
  • D7(IO13)
  • D2(IO4)
  • D6(IO12)
  • D8(IO15)
  • D0(IO16)
  • D2(IO4)
  • D6(IO12)
  • D8(IO15)
  • D1(IO5)
  • D5(IO14)
  • D7(IO13)
ESP32
  • 4(GPI36)
  • 5(GPI39)
  • 8(GPO32)
  • 10(GPI025)
  • 12(GPIO27)
  • 14(GPIO12)
  • 21(GPIO7)
  • 24(GPIO2)
  • 26(GPIO4)
  • 28(GPIO17)
  • 30(GPIO18)
  • 33(GPIO21)
  • 36(GPIO22)
  • 6(GPI34)
  • 7(GPI35)
  • 9(GP033)
  • 11(GPIO26)
  • 13(GPIO14)
  • 16(GPIO13)
  • 23(GPIO15)
  • 25(GPIO0)
  • 27(GPIO16)
  • 29(GPIO5)
  • 31(GPIO19)
  • 35(GPIO1)
  • 37(GPIO23)
  • 8(GPO32)
  • 10(GPIO25)
  • 12(GPIO27)
  • 14(GPIO12
  • 23(GPIO15)
  • 25(GPIO0)
  • 27(GPIO16)
  • 29(GPIO5)
  • 31(GPIO19)
  • 34(GPIO3)
  • 36(GPIO22)
  • 9(GP033)
  • 11(GPIO26)
  • 13(GPIO14)
  • 16(GPIO13)
  • 24(GPIO2)
  • 26(GPIO4)
  • 28(GPIO17)
  • 30(GPIO18)
  • 33(GPIO21)
  • 35(GPIO1)
  • 37(GPIO23)
Arduino M0
Arduino Zero
D7 (NOT CHANGABLE) D0-D6, D8-D13
Arduino Due D0-D53 D0-D53
STM32
Black Pill
Blue Pill
Etc...
PA0-PA15, PB0-PB15
PC13-PC15
PA0-PA15, PB0-PB15
PC13-PC15

This library can simplify user code with following functions:

1. Function dimmerLamp - this function initializes the number of operating pin and is defined by the user
Example: 
    a.dimmerLamp dimmer(4);    dimmer output DIM/PSM is initialized on the pin 4 for the bords WITHOUT changable ZERO-CROSS input pin (AVR, Arduino M0/Zero)
    b.dimmerLamp dimmer(4, 2);  dimmer output DIM/PSM is initialized on the pin 4 and zero-cross initialized on pin 2. Only for boards whith changable zero-cross(ESP32, ESP8266, Arduino Due)

2. Function begin port initialization, timer and external interrupt from zero-cross.
Example:
dimmer.begin(NORMAL_MODE, ON/OFF); port initialization, work mode choice, ON/OFF. 
Parameter 1: dimmer working modes consist of two choices - NORMAL_MODE and TOGGLE_MODE 
    a. NORMAL_MODE to make dimmer work in defined value from 0 to 100 (%) (integer)
        Example of this mode located in \RBDdimmer\examples\SimpleDimmer
    b. TOGGLE_MODE smooth change of dimming value up or down in a defined range. This solutions implies change of dimming values by means of hardware timer, without using the cycle code.
        Example of this mode located in \RBDdimmer\examples\SimpleToggleDimmer

Parameter 2: ON/OFF.
    a. ON - turns timer ON, allows to use dimmer.
    b. OFF - turns timer parameters OFF, prevents the use of dimmer.

3. Function setPower sets dimming value from 0 to 100%
    Example: dimmer.setPower(90);
    The value can be a float and the precision is improved for ESP8266 ( up to 400 steps )

4. Function getPower to display current dimming value
    Example: Serial.print(dimmer.getPower()); Result 0~100 int

5. Function setMode sets and changes the work mode (NORMAL_MODE and TOGGLE_MODE)
            dimmer.setMode(NORMAL_MODE/TOGGLE_MODE)

6. Function getMode displays values of current work mode
    Example: Serial.print(dimmer.getPower());  Result 0 (NORMAL_MODE) or 1 (TOGGLE_MODE)

7. Function setState sets dimming state ON/OFF
    Example: dimmer.setState(ON); delay(100); dimmer.setState(OFF);

8. Function getState displays current state of dimmer
    Serial.print(dimmer.getState()); Result 0 (OFF) or 1 (ON)

9. Function changeState changes dimmer state to the opposite one 
    Пример dimmer.setState(ON); delay(100); dimmer.changeState; delay(100);

10. Function toggleSettings smooth change of dimming value up or down in a defined range
    Example located in \RBDdimmer\examples\SimpleToggleDimmer

About

The following library is used for work with dimmer, it gives ability to control large ammoun of dimmer. This lib uses with Leonardo, Mega, UNO, ESP8266, ESP32, Arduino M0, Arduino Zero, Arduino Due, STM32.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • C++ 81.0%
  • C 19.0%