Laravel RabbitMQ

A simple rabbitmq library for laravel based on Publish–Subscribe pattern where the subscriber is the Consumer. It can also support Aliyun AMQP Protocol

Table of Contents

1. Install

2. Configure

   2.1. Connections

   2.2. Queues

   2.3. Exchanges

   2.4. Publishers

   2.5. Consumers

3. Usage

   3.1. Publishing a message

   3.2. Consuming a message

   3.3. Available CLI commands

   3.4. Custom Message Processor

4. Contribute

1. Install

Run:

composer require joker-project/laravel-aliyun-amqp

For Laravel version 5.5 or higher the library should be automatically loaded via Package discovery.

For Laravel versions below 5.5 you need to add the service provider to app.php:

<?php

return [
    // ...
    'providers' => [
        // ...
        JokerProject\LaravelAliyunAmqp\Providers\ServiceProvider::class,
    ],
    // ...
];

2. Configure

• Create a new file called laravel_rabbitmq.php inside your Laravel's config directory. (Or use artisan vendor:publish - Read more here)
• Fill out the config based on your needs.

The configuration files has 5 main nodes: connections, exchanges, queues, publishers, consumers.

They are used in the following mode:

Example config:

return [
    'connections' => [
        'connectionA' => [/** Connection A attributes */],
        'connectionB' => [/** Connection B attributes */],
    ],
    'exchanges' => [
        'exchangeA' => [
            // Tells that the exchange will use the connection A
            'connection' => 'connectionA',
            /** Exchange A Attributes */
        ],
        'exchangeB' => [
            // Tells that the exchange will use the connection B
            'connection' => 'connectionB',
            /** Exchange B Attributes */
        ]
    ],
    'queues' => [
        'queueA' => [
            // Tells that the queue will use the connection alias A
            'connection' => 'connectionA',
            /** Queue A Attributes */
        ]
    ],
    'publishers' => [
        'aPublisherName' => /** will publish to exchange defined by alias */ 'exchangeA'
    ],
    'consumers' => [
        'aConsumerName' => [
            // will read messages from
            'queue' => 'queueA',
            // and will send the for processing to an "JokerProject\LaravelAliyunAmqp\Processor\MessageProcessorInterface"
            'message_processor' => \JokerProject\LaravelAliyunAmqp\Processor\CliOutputProcessor::class
        ]
    ]
]

2.1. Connections

Connection attributes:

• All attributes are optional, if not defined the defaults will be used.

Attribute	Type	Default value	Description
hostname	string	127.0.0.1	The host for the RabbitMQ instance
port	integer	5672	The port for the RabbitMQ instance
username	string	guest	Default's RabbiqMQ username
password	string	guest	Default's RabbiqMQ username
vhost	string	/	RabbitMQ Virtual Host. Read more here.
lazy	boolean	true	Setting it lazy will only make the connection when an action that needs the connection willl be called
read_write_timeout	integer	3	TTL for read/write operations.
connect_timeout	integer	3	TTL for the connection
heartbeat	integer	0	Whether to check the socket connection periodically. Read more here.
keep_alive	boolean	false	Whether to use system's keep alive property. Read more here.
access_key	string		Aliyun Cloud Access Key
access_secret	string		Aliyun Cloud Access Secret
resource_owner_id	string		Aliyun Cloud Instance ID

2.2. Queues

Queue main nodes:

Node key	Type	Description
connection	string	The reference to the connection that should be used.
name	string	The actual name of the queue on RabbitMQ
attributes	array	Optional attributes for the queue

Queue attributes

Attribute key	Type	Default	Description
passive	boolean	false	This is an AMQP attribute. Read about [here] (https://www.rabbitmq.com/amqp-0-9-1-reference.html)
durable	boolean	false	Same as passive attribute
exclusive	boolean	false	Same as passive attribute
auto_delete	boolean	false	Same as passive attribute
internal	boolean	false	Same as passive attribute
nowait	boolean	false	Same as passive attribute
auto_create	boolean	false	Whether should try to create (and bind) the queue when queried.
throw_exception_on_redeclare	boolean	true	Throw exception when re-declare of the queue fails
throw_exception_on_bind_fail	boolean	true	Throw exception when cannot create the bindings
bind	array	empty	Whether should bind to an exchange: See Example 1.

Example 1:

[
	['exchange' => 'first.exchange', 'routing_key' => '*'],
	['exchange' => 'second.exchange', 'routing_key' => 'foo_bar'],
]

2.3. Exchanges

Exchange main nodes:

Node key	Type	Description
connection	string	The reference to the connection that should be used.
name	string	The actual name of the queue on RabbitMQ
attributes	array	Optional attributes for the exchange

Exchange attributes

Attribute key	Type	Default	Description
exchange_type	string	-	Mandatory The type of the exchange (direct / fanout / topic / headers). View description [here] (https://www.rabbitmq.com/tutorials/amqp-concepts.html)
passive	boolean	false	This is an AMQP attribute. Read about [here] (https://www.rabbitmq.com/amqp-0-9-1-reference.html)
durable	boolean	false	Same as passive attribute
auto_delete	boolean	false	Same as passive attribute
internal	boolean	false	Same as passive attribute
nowait	boolean	false	Same as passive attribute
auto_create	boolean	false	Whether should try to create (and bind) the queue when queried.
throw_exception_on_redeclare	boolean	true	Throw exception when re-declare of the queue fails
throw_exception_on_bind_fail	boolean	true	Throw exception when cannot create the bindings
bind	array	empty	Whether should bind to an exchange: See Example 2.

Example 2:

[
	['queue' => 'first.exchange', 'routing_key' => '*'],
	['queue' => 'second.exchange', 'routing_key' => 'foo_bar'],
]

2.4. Publishers

A publisher push a message on an exchange (but it can also push it on a queue). Defining a publishers:

'publishers' => [
	'myFirstPublisher' => 'echangeAliasName',
	'mySecondPublisher' => 'queueAliasName'
	// and many as you need
]

2.5. Consumers

A consumer will alway get message from a queue. Define a consumer:

'consumers' => [
    'myConsumerName' => [
        'queue' => 'queueAliasName',
        'prefetch_count' => 1,
        'message_processor' => \JokerProject\LaravelAliyunAmqp\Processor\CliOutputProcessor::class
    ]
]

Field	Type	Description
queue	string	Reference of the defined queue block.
prefetch_count	int	Default: 1. The number of the message that a cosumer will grab without ack. Read more here
passive	boolean	false
durable	boolean	false
auto_delete	boolean	false
internal	boolean	false
nowait	boolean	false
auto_create	boolean	false
throw_exception_on_redeclare	boolean	true
throw_exception_on_bind_fail	boolean	true
bind	array	empty

3. Usage

After configuring, you should end up with a configuration file laravel_rabbitmq.php similar to this one:

return [
    'connections' => [
        'connectionA' => [],
    ],
    'exchanges' => [
        'exchangeA' => [
            'connection' => 'connectionA',
			'name' => 'foo_bar',
			'attributes' => [
				'exchange_type' => 'topic'
			]
        ]
	],
    'queues' => [
        'queueB' => [
            'connection' => 'connectionA',
            'name' => 'foo_bar_listener',
			'attributes' => [
				'bind' => [
                    ['exchange' => 'foo_bar', 'routing_key' => '*']
                ]
			]
        ]
    ],
    'publishers' => [
        'aPublisherName' => 'exchangeA'
    ],
    'consumers' => [
        'aConsumerName' => [
            'queue' => 'queueB',
            'message_processor' => \JokerProject\LaravelAliyunAmqp\Processor\CliOutputProcessor::class
        ]
    ]
]

3.1. Publishing a message

Example of usage in code:

<?php
/**
 * @var $app \Illuminate\Contracts\Container\Container
 * @var $publisher \JokerProject\LaravelAliyunAmqp\PublisherInterface 
 */
$publisher = $app->makeWith(PublisherInterface::class, ['aPublisherName']);
$message = [
    'title' => 'Hello world',
    'body' => 'Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua.',
];
$routingKey = '*';
$publisher->publish(json_encode($message), /* optional */$routingKey);

Optional, there is a command that can be used to publish a message.

php artisan rabbitmq:publish aPublisherName MyMessage

Note: At the moment, routing key in CLI is not supported.

3.2. Consuming a message

Consuming message should be done by running a command in deamon mode. While PHP is not intended to do that, you can use supervisor for that.

The flow of the consummer is rather simple: CLI Consumers -> Get message -> Passes it to the message_processor key from configuration.

A message processor is a class that implements JokerProject\LaravelAliyunAmqp\Processor interface. If you do no want to handle acknowledgement you can extend \JokerProject\LaravelAliyunAmqp\Processor\AbstractMessageProcessor which require implementation of processMessage(AMQPMessage $message): bool method.

You message_processor key is runned by laravel's app command for build of the class.

Start the message consumer/listener:

php artisan rabbitmq:consume aConsumerName

Running consumers with limit (it will stop when one of the limits are reached)

php artisan rabbitmq:consume aConsumerName --time=60 --messages=100 --memory=64

This tells the consumer to stop if it run for 1 minute or consumer 100 messages or has reached 64MB of memory usage.

3.3. Available commands

When running php artisan a new namespace will be present:

Name	Description	Example
rabbitmq:consume	Consummer command	php artisan rabbitmq:consume [consumer-name] --time=60 --messages=100 --memory=64 Where --time/messages/memory are optional. Default values are 60 seconds, 100 messages and 64MB of RAM usage
rabbitmq:delete-all	Delete all queues, exchanges and binds that are defined in entities AND referenced to either a publisher or a consumer
rabbitmq:list	List all entities by type: publishers	consumers
rabbitmq:publish	Publish one message using a consumer	php artisan rabbitmq:publish [publisher-name] message
rabbitmq:setup	Creates all queues and exchanges	php artisan rabbitmq:setup or php artisan rabbitmq:setup --force. NOTE When using force, all queues and exchanges will be deleted first and then re-created. ALERT When you use Aliyun Config,This Command will auto create Queue but does not create exchange and throw an exception, you should Create EXCHANGE and Bindings by yourself

3.4. Custom Message Processor

At the current moment there is the posibility to either implement the MessageProcessorInterface class or extend the AbstractMessageProcessor.

When using the AbstractMessageProcessor, you will have access to extra API than can be used in your processMessage():

protected function ack(AMQPMessage $message);
protected function nack(AMQPMessage $message, bool $redeliver = true);

4. Contribute

You are free to contribute by submiting pull request or reporting any issue in Github. At the current stage of the project, no contribution procedure is defined.