English | 中文
dperf is a DPDK based 100Gbps network performance and load testing software.
- High performance：
- Based on DPDK, dperf can generate huge traffic with a single x86 server: tens of millions of HTTP CPS，hundreds of Gbps throughput and billions of concurrent connections.
- Detailed statistics：
- Provides detailed statistics and identify every packet loss.
- Support multiple scenarios：
- Load testing and stability testing for Layer 4 Load Balancer and other Layer 4 gateways
- Network performance testing for servers on cloud
- Performance test of network package processing capability for NIC and CPU
- Can be used as a high performance HTTP server or client for load testing
| Client Cores | Server Cores | HTTP CPS |
|---|---|---|
| 1 | 1 | 2,101,044 |
| 2 | 2 | 4,000,423 |
| 4 | 4 | 7,010,743 |
| 6 | 6 | 10,027,172 |
| Client Cores | Server Cores | RX(Gbps) | TX(Gbps) | Client CPU Usage(%) | Server CPU Usage(%) |
|---|---|---|---|---|---|
| 1 | 1 | 18 | 18 | 60 | 59 |
| 2 | 2 | 35 | 35 | 60 | 59 |
| 4 | 4 | 46 | 46 | 43 | 43 |
| Client Cores | Server Cores | Current Connections | Client CPU Usage(%) | Server CPU Usage(%) |
|---|---|---|---|---|
| 1 | 1 | 100,000,000 | 34 | 39 |
| 2 | 2 | 200,000,000 | 36 | 39 |
| 4 | 4 | 400,000,000 | 40 | 41 |
| Client Cores | TX MPPS | Client CPU Usage(%) |
|---|---|---|
| 1 | 15.96 | 95 |
| 2 | 29.95 | 95 |
| 4 | 34.92 | 67 |
| 6 | 35.92 | 54 |
| 8 | 37.12 | 22 |
Note: this test is under one 25Gbps Mellanox CX4
Above performance is obtained with below configurations:
- MEM: 512GB(hugepage 100GB)
- NIC: Mellanox MT27710 25Gbps * 2
- Kernel: 4.19.90
dperf outputs various statistics every second：
- TPS, CPS, various PPS
- Errors of TCP/Socket/HTTP
- Packets loss/drop
- Retransmissions of TCP Flags
seconds 22 cpuUsage 52
pktRx 3,001,058 pktTx 3,001,025 bitsRx 2,272,799,040 bitsTx 1,920,657,600 dropTx 0
arpRx 0 arpTx 0 icmpRx 0 icmpTx 0 otherRx 0 badRx 0
synRx 1,000,345 synTx 1,000,330 finRx 1,000,350 finTx 1,000,350 rstRx 0 rstTx 0
synRt 0 finRt 0 ackRt 0 pushRt 0 tcpDrop 0
skOpen 1,000,330 skClose 1,000,363 skCon 230 skErr 0
httpGet 1,000,345 http2XX 1,000,350 httpErr 0
ierrors 0 oerrors 0 imissed 0
#edit '/boot/grub2/grub.cfg' like this, and reboot the OS
linux16 /vmlinuz-... nopku transparent_hugepage=never default_hugepagesz=1G hugepagesz=1G hugepages=8
#edit 'config/common_base' to enable PMDs
#Mellanox CX4/CX5 requires 'CONFIG_RTE_LIBRTE_MLX5_PMD=y'
#HNS3 requires 'CONFIG_RTE_LIBRTE_HNS3_PMD=y'
#VMXNET3 requires 'CONFIG_RTE_LIBRTE_VMXNET3_PMD=y'
TARGET=x86_64-native-linuxapp-gcc #or arm64-armv8a-linuxapp-gcc
cd /root/dpdk/dpdk-stable-19.11.10
make install T=$TARGET -j16
cd dperf
make -j8 RTE_SDK=/root/dpdk/dpdk-stable-19.11.10 RTE_TARGET=$TARGET
#Mellanox NIC skip this step!
#Suppose your PCI number is 0000:1b:00.0
modprobe uio
modprobe uio_pci_generic
/root/dpdk/dpdk-stable-19.11.10/usertools/dpdk-devbind.py -b uio_pci_generic 0000:1b:00.0
#dperf server bind at 6.6.241.27:80, gateway is 6.6.241.1
./build/dperf -c test/http/server-cps.conf
#the client IP must be in the range of 'client' in the configuration file
ping 6.6.241.27
curl http://6.6.241.27/
Below example will start a HTTP CPS stress test. #run dperf server ./build/dperf -c test/http/server-cps.conf
#from another host, run dperf client
./build/dperf -c test/http/client-cps.conf
See the website at https://dperf.org/.
- dperf requires that the HTTP message is in one packet, which is not suitable for the test of layer 7 load balancer;
- dperf requires exclusive use of the network interfaces.
- dperf does not have routing capability. It is recommended to build a test environment with a switch.
dperf welcomes your contribution. See the CONTRIBUTING file for details.
- Jianzhang Peng, a Ph.D. graduate in Computer Science from the University of Science and Technology of China, served as a Principal Engineer at both Huawei and Baidu. He participated in the development of 7-layer and 4-layer load balancing systems. During his tenure at Baidu, he developed the dperf project. Even after leaving Baidu, he remains dedicated to the maintenance of the dperf project. Currently, he works in Singapore, focusing on researching and implementing low-latency network systems for high-frequency crypto quantitative trading.
Thank you for considering supporting the dperf project, which is maintained by Jianzhang Peng. We are committed to providing a high-performance network load tester. Your sponsorship will help him maintain the project, address issues, and continually enhance its features.
dperf is distributed under the Apache License, Version 2.0.