Repository navigation
DS725+ RAID constantly goes critical and have to repair #609
rockman6666
started this conversation in
General
Replies: 2 comments 1 reply
|
Is it always the same drive bay? A missing disk is not a unverified disk being rejected. It would just show as unverified in storage manager. DSM allows migrating unverified disks (that contain data from another Synology) so even if a disk changed to show unverified the array and volume would continue to work, Three possible causes:
For number 1: Shut down the DS725+, remove both disks then insert them again and make sure are in as far as they can go. For numbers 2 and 3 you'd contact Synology and get it replaced. Though they'll probably try to blame the WD disks. |
1 reply
|
If it happens again you can check if it's the DS725+ or the disk:
|
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
Hi all. I migrated my 2 disk array from a 718+ to the 725+ and everything functions fine, until when it shuts down for the night and restarts the next morning, sometimes not recognizing there's 2 disks. I'll have to restart again to get the disks to both recognize and then do a repair on the RAID, which fixes everything. This is completely random, some weeks happening every day and other weeks happening maybe once or twice. I have a triggered task at startup to re-enforce the compatibility of my WD disks, which completes when no issues happen and fails when one of the drives is missing. Is there something I can do to prevent this from happening in the future? Any help would be appreciated. Thanks
P.S. I've done SMART testing on my disks and have all come back clean. They worked perfectly fine in the previous device. I also have 2 of these devices that I migrated to and both of them are having the same problem.
All reactions