Repository navigation
Replies: 1 comment
|
I fixed this using the following: Reset the compatiblity database using Storage Manager / HDD/SSD / Settings / Advanced / Drive Database / Update Now (or Manual Update) set the task scheduler to run: cd /volume1/nvmescript/ && bash syno_hdd_db.sh -p -s the script is located on my system at /volume1/nvmescript/ This dynamically toggles the warning on and off and allows DSM to update relevant drives in the database and supresses the annoying warning after a reboot. If the warning pops up, I can manually supress it by manually running the boot task - no reboots needed. |
0 replies
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Uh oh!
There was an error while loading. Please reload this page.
On RS3621xs the installtion of M2D20 and two Samsung SSD 990 Pro 4TB NVMEs, the script shows success but Storage Manager still shows the SSDs as "Unverified" and shows the warning message.
Without the script, the Read/Write cache was functional, but the warning and "unverified" status is annoying. I was hoping to use the script to rid the system of the message and status.
I spent a couple of hours with Gemini trying to figure this out and get the same result of the "unverified" message whether the script is run at boot or manually. During troubleshooting and using -f there was a moment when the script wiped out the installed Synology hard drives from the list too, and getting things back to normal updated the status of those drives without a reboot... so I'm skeptical this has anything to do with rebooting or cold booting.
The final recommendation by Gemini is that I have to do a cold boot rather than restart to get this to work. I'm remote and am giving up. Love to hear any guidance from someone with experience here. The script output is below:
:~# /volume1/NVME_SCRIPT/Synology_HDD_db-3.6.139/syno_hdd_db.sh -n
Synology_HDD_db v3.6.139
RS3621xs+ x86_64 DSM 7.4.1-90080-1
Running from: /volume1/NVME_SCRIPT/Synology_HDD_db-3.6.139/syno_hdd_db.sh
Running in interactive shell
HDD/SSD models found: 1
HAT5300-16T,1403,16000 GB
M.2 drive models found: 1
Samsung SSD 990 PRO 4TB,8B2QJXD7,4000 GB
M.2 PCIe card models found: 1
M2D20
No Expansion Units found
HAT5300-16T already exists in rs3621xs+_host.db
HAT5300-16T (1403) already exists in rs3621xs+_host_v7.db
Samsung SSD 990 PRO 4TB already exists in rs3621xs+_host.db
Samsung SSD 990 PRO 4TB (8B2QJXD7) already exists in rs3621xs+_host_v7.db
M2D20 NVMe already enabled for RS3621xs+
Support disk compatibility already enabled.
Support memory compatibility already enabled.
NVMe support already enabled.
M.2 volume support already enabled.
Disabled drive db auto updates.
Creating pool in UI on drives in M.2 adaptor card already enabled.
DSM successfully checked disk compatibility.
You may need to reboot the Synology to see the changes.
All reactions