THIS REPO HAS BEEN ARCHIVED FOR HISTORICAL REFERENCE AND IS NO LONGER MAINTAINED

What is Ark: PaperWallet Pi

Ark: PaperWallet Pi is an offline, secure, WiFi-accessible webserver;
a hardware-based paper wallet generator for the Ark cryptocurrency!

Based off of Ark-PaperWallet and PirateBox,
Ark: PaperWallet Pi is a FOSS project, GPL3 compatible and MIT Licensed.

---

Screenshot

Address: paperwallet.lan

Welcome Aboard!

---

Requirements

• Raspberry Pi 1/2/3/Zero/ZeroW
• Class 10/U10 MicroSD-Card
• Micro-USB Cable
• Host Computer (Window, Linux, macOS)

Supported Configurations

Hardware	Software
Platform Tested	Platform Tested

example:

• Raspberry Pi Zero W
  

Part	Source
Raspberry Pi Zero W	Adafruit: Raspberry Pi Zero W
"Class 10/U1" microSD-card	ex: Adafruit: 8GB Class 10 SD/MicroSD Memory Card
Raspbian Stretch Lite	raspberrypi.org/downloads/raspbian

• requirement notes:
  • For non-Zero W's & Pi 3's, you will need a compatible USB-WiFi adapter.
  • If installing from Raspbian or another RPi distro, you'll need Git to clone this repo.
    sudo apt-get install git

---

Preparation

Image Preparation

• See How to Raspbian for instructions on how to download and flash Raspbian.

OTG-Mode

• See How to OTG for instructions on how to install Raspbian and access your Pi over USB.

Preparation Notes:

• Make sure you are sharing/bridging your internet connection via usb-cable with your RPi.
• Installation will take about 10-minutes.

---

Installation:

1. Connect to your RPi.

• if using Raspbian Stretch Lite: SSH via usb headless-mode
  ssh pi@raspberrypi.local
• default password: raspberry
• Be sure to change this afterwards.

2. Expand your filesystem

• Expand your filesystem to use your whole microSD-card:
  sudo raspi-config
• Option 7: Advanced Options
• Option A1: Expand Filesystem
• Reboot when prompted,
  or manually via sudo reboot

3. Clone this repo & 'cd' into it:

• git clone https://github.com/Ark-IoT/ark-paperwallet-pi
• cd ark-paperwallet-pi

4. Change permissions of the "paperwallet" folder:

• sudo chmod -R 775 paperwallet

5. 'cd' to 'paperwallet' and run the install.sh file:

• cd paperwallet
• sudo bash install.sh

6. Wait about 1-minute after the install script finishes, then:

• sudo shutdown now

7. Plug your RPi into a power source (ex: micro-usb power port).

• Your Ark: Paper Wallet Pi will power on,
  and the WiFi network Ark: Paper Wallet will be visible.
• First boot can take a few minutes depending on hardware(microSD speed, Pi-model, etc).

8. Using a web-browser, navigate to:

• paperwallet.lan
  Welcome Aboard!

---

Troubleshooting:

• See Troubleshooting.md

---

ToDo:

• Make a better todo
• Documention!

---

Tip Jar

ѦRK [Ѧ]: AZreeHxX23s4jttL3ML8n6A2aLrwHPfVGZ
DѦRK [DѦ]: DHQ4Fjsyiop3qBR4otAjAu6cBHkgRELqGA