Camera

Camera

The light field controls. Each can be animated: the ◆ at the right of a setting adds or removes its keyframes and moves between them (see Animation).

Depth

• Aperture: f/22 to f/0.5. Small apertures keep everything sharp (at f/22 the app first shows a quick view, and once the photo's depth has been measured (by opening the aperture or clicking to focus), and you stop changing things, it makes the all-in-focus picture from every sensor pixel in the background, at twice the view's size, and swaps it in; any change goes back to the quick view; this needs a graphics card, and is skipped if a step had to fall back to the CPU); wide ones blur what is away from the focus (click the picture to choose what is in focus). Beyond f/2, the widest the camera can record, the blur is synthetic, using the depth map.
• Depth: how quickly things blur away from the focus.
• Smoothing: smooths the depth map, following the picture's edges.
• Depth method: how the depth map is measured. Automatic picks the engine's way for raw camera photos and the blend otherwise. Illuminator is Illuminator's measurement (a plain cost volume). Classic Desktop is the engine's way, as Lytro Desktop measures it. Blended mixes the two, with a Blend slider from Illuminator's depth (0) to Classic Desktop's (100). Measuring is done on the graphics card where there is a real one; if a step has to be done on the processor instead, a note says so. A photo's measured depth is kept next to it in the library (desktop app), so reopening it is quicker.
• Depth models: Depth Anything V2 Small (99 MB, Apache-2.0) and MiDaS v2.1 Small (66 MB, MIT; authors and licenses are listed in About) are optional downloads in Settings > Depth models, in the desktop app and in the browser version (ticking a box downloads it, unticking removes it; the browser keeps it in its cache, which it may clear, and runs it on WebGPU where the browser has it, else on the CPU). A downloaded model is then a choice under Depth method. It looks at the picture as a whole and gives clean object edges and an answer on glossy or blank surfaces; its depth is relative, so Illuminator fits it to the measured depth, and Model blend sets the mix (0 is the measured depth alone, 100 the model's alone; 70 by default). Model smoothing blurs the model's depth before it is fitted (for a noisy or blocky model; 0 by default) and Model curve bends it (below 50 pulls the middle distances toward the far end, above 50 toward the near end; 50 by default). Each model keeps its three settings: choosing a model brings back the values you last used with it, and they are saved with the photo. The model runs once per photo (a few seconds on the graphics card or the CPU); the blend, smoothing and contrast then change at once. It sees through a blurred fence the way a person does, so for a thin out-of-focus foreground the measured depth is the better one: lower the blend.
• Lytro Desktop depth map: shown for photos imported from a Lytro Desktop library. On, the depth map Lytro Desktop computed (or the one edited there) is used for blur and depth masks; off, depth is measured from the light field as for any other photo. Lytro's map is usually the better one where the picture is blank or out of focus, such as a plain wall behind the subject.
• Object edges: finds the objects in the photo and puts the depth map's edges on their outlines, so depth steps are clean instead of blocky. It works with or without High quality depth map. The first time it is turned on, it downloads an object model (about 45 MB, kept afterwards); finding the objects takes several seconds per photo, and on a computer with a graphics card most of that work (the model itself, the picture's preparation and the clean-up of the depth map) runs on the card.
• High quality depth map: sharper depth edges that match the photo, and depth found even on far, very out-of-focus surfaces (a textured wall behind the subject), about two to three times as slow to measure. On by default; off, the faster, blockier depth map is used.
• Show depth map: shows the depth map in color. It stays on while you change settings, move the viewpoint or press Render (the full sensor still is made meanwhile and shows when the depth map is turned off).
• Grayscale: (next to Show depth map) shows the depth map in gray instead of in color.
• Depth map contrast: stretches the depth map's colors over a narrower range of depth, so small differences show more (Lytro Desktop's depth maps look this way). It only changes how the depth map is shown, not the depth.

Focus Spread

• Focus Point: where you last clicked; spread and tilt are centered there.
• Spread: a range of depth kept sharp on each side of the focus.
• Smoothing: softens the edges of that range, so blur builds up gradually.
• Blur: feathers the spread in the picture: the map of how much each pixel is blurred is smoothed across the picture, so where the sharp range meets blurred areas the change is gradual (and depth map errors show less). It does not blur the picture itself; Smoothing works on depth, Blur on the picture's area.
• Show spread: tints what lies outside it, blue nearer and orange farther.

Tilt

Tilts the plane of focus, like a tilt-shift lens: Tilt is the amount, Rotation the direction. Enabled turns the tilt off and on without losing the settings.

Show tilt tints the picture by how far each part lies from the tilted plane of focus, blue nearer and orange farther, clear where it is in focus. It and Show spread switch each other off.

Perspective

Viewpoint shows where the viewpoint is (drag on the picture to move it), as a share of the lens aperture across and down; Center is the middle.

Moving the viewpoint shifts every depth but one, the focus plane (or, with the aperture closed, the depth the camera focused on). Custom pivot and Pivot depth choose another depth to stay still.

Bokeh

The shape of out-of-focus highlights: Natural, Optical (softer), Circle or Blades, and Highlights to make bright points glow into bokeh balls.

• Blades (Blades shape): the number of aperture blades, 3 to 32, which is the number of sides of each bokeh ball.
• Oval (Circle shape): stretches the circle into an oval, like the cat's-eye bokeh near the edges of a fast lens.
• Rotation (Circle and Blades): turns the blades or the oval.
• Onion (Circle and Blades): concentric rings inside each bokeh ball, like those from aspherical lens elements.