isoline plots don't plot on first try

[potter2]

The first time a isoline plot i requested, only the base map is plotted. If I change the min and max value, then generate the levels then apply, the lines come up - no lables (see previous bug)

[doutriaux1]

@aashish24 please do NOT assign GUI issues to me. I will take a look but I make no promise.

[aashish24]

We need to verify if this is a GUI issue or not. Please reassign after you verify.

[doutriaux1]

works perfectly from command line, just checked.

[doutriaux1]

I don't know who is in charge of GUI though...

[potter2]

The other methods work, just the isofill is broken.
and it fails after the variable is dragged to the window - nothing happens. In either order - If the plot type goes in first then nothing happens when the variable is dragged in. It doesn’t show up as anything has happened. It doesn’t kill the panel - once the “x” clears the panel, other methods will work including DV3D.

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 6:48 AM, Charles <notifications@github.commailto:notifications@github.com> wrote:

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

[williams13]

I think the problem could have been the graphics method that was chosen. If you selected say ASD for example it did not work. I noticed last Thursday running from the command line for the GUI.

Jerry could have been running from an older initial.attribute file.

From: Charles <notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 6:48 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

[potter2]

You are correct, I am using an initia.attributes file from my LINUX installation since I deleted my .uvcdat directory. But I thought Aashish found the same error

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:03 AM, Dean N. Williams <notifications@github.commailto:notifications@github.com> wrote:

I think the problem could have been the graphics method that was chosen. If you selected say ASD for example it did not work. I noticed last Thursday running from the command line for the GUI.

Jerry could have been running from an older initial.attribute file.

From: Charles <notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 6:48 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54821807.

[potter2]

You’re right!

If I select “default” the isofill works..

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:03 AM, Dean N. Williams <notifications@github.commailto:notifications@github.com> wrote:

I think the problem could have been the graphics method that was chosen. If you selected say ASD for example it did not work. I noticed last Thursday running from the command line for the GUI.

Jerry could have been running from an older initial.attribute file.

From: Charles <notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 6:48 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54821807.

[williams13]

Yes, I pointed this out to Charles last week. WE are working on getting a new initial.attributes together now.

From: potter2 <notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:25 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

You’re right!

If I select “default” the isofill works..

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:03 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

I think the problem could have been the graphics method that was chosen. If you selected say ASD for example it did not work. I noticed last Thursday running from the command line for the GUI.

Jerry could have been running from an older initial.attribute file.

From: Charles <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 6:48 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54821807.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826244.

[potter2]

I assume when this if fixed, the initial.attributes file will be created if one doesn’t exist. That doesn't work right now.

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:27 AM, Dean N. Williams <notifications@github.commailto:notifications@github.com> wrote:

Yes, I pointed this out to Charles last week. WE are working on getting a new initial.attributes together now.

From: potter2 <notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:25 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

You’re right!

If I select “default” the isofill works..

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:03 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

I think the problem could have been the graphics method that was chosen. If you selected say ASD for example it did not work. I noticed last Thursday running from the command line for the GUI.

Jerry could have been running from an older initial.attribute file.

From: Charles <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 6:48 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54821807.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826244.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826733.

[williams13]

Charles and I will have to work on this. The initial.attributes is not optimally set with the right attributes.

From: potter2 <notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:33 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

I assume when this if fixed, the initial.attributes file will be created if one doesn’t exist. That doesn't work right now.

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:27 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

Yes, I pointed this out to Charles last week. WE are working on getting a new initial.attributes together now.

From: potter2 <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:25 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

You’re right!

If I select “default” the isofill works..

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:03 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

I think the problem could have been the graphics method that was chosen. If you selected say ASD for example it did not work. I noticed last Thursday running from the command line for the GUI.

Jerry could have been running from an older initial.attribute file.

From: Charles <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 6:48 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54821807.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826244.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826733.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54827876.

[potter2]

Dean,
Could you send me your initial.attributes file so I can use it to test. The one I have is old.

Thanks,
Jerry

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:41 AM, Dean N. Williams <notifications@github.commailto:notifications@github.com> wrote:

Charles and I will have to work on this. The initial.attributes is not optimally set with the right attributes.

From: potter2 <notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:33 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

I assume when this if fixed, the initial.attributes file will be created if one doesn’t exist. That doesn't work right now.

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:27 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

Yes, I pointed this out to Charles last week. WE are working on getting a new initial.attributes together now.

From: potter2 <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:25 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

You’re right!

If I select “default” the isofill works..

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:03 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

I think the problem could have been the graphics method that was chosen. If you selected say ASD for example it did not work. I noticed last Thursday running from the command line for the GUI.

Jerry could have been running from an older initial.attribute file.

From: Charles <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 6:48 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54821807.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826244.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826733.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54827876.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54829503.

[williams13]

The one I have doesn't work either. I had to create needed attributes by hand for the diagnostics

From: potter2 <notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:55 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

Dean,
Could you send me your initial.attributes file so I can use it to test. The one I have is old.

Thanks,
Jerry

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:41 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

Charles and I will have to work on this. The initial.attributes is not optimally set with the right attributes.

From: potter2 <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:33 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

I assume when this if fixed, the initial.attributes file will be created if one doesn’t exist. That doesn't work right now.

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:27 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

Yes, I pointed this out to Charles last week. WE are working on getting a new initial.attributes together now.

From: potter2 <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 7:25 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

You’re right!

If I select “default” the isofill works..

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 7:03 AM, Dean N. Williams <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

I think the problem could have been the graphics method that was chosen. If you selected say ASD for example it did not work. I noticed last Thursday running from the command line for the GUI.

Jerry could have been running from an older initial.attribute file.

From: Charles <notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 6:48 AM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

works perfectly from command line, just checked.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54819495.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54821807.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826244.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54826733.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54827876.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54829503.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54831731.

[doutriaux1]

the one in PAckages/vcs/Share/initial.attributes should be ok (minus Dean's diagnostics ones). Let us know @potter2

[doutriaux1]

@potter2 i tweaked the ninital.attriubtes it should be better now in:
issue_611_isoline_no_plot

[potter2]

can you see the file to me?

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 3:18 PM, Charles <notifications@github.commailto:notifications@github.com> wrote:

@potter2https://github.com/potter2 i tweaked the ninital.attriubtes it should be better now in:
issue_611_isoline_no_plot

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54896037.

[williams13]

Charles is working to add some of the attributes for diagnostics. Charles let us know when the initial.attribute is ready.

From: potter2 <notifications@github.commailto:notifications@github.com>
Reply-To: UV-CDAT/uvcdat <reply@reply.github.commailto:reply@reply.github.com>
Date: Monday, September 8, 2014 3:20 PM
To: UV-CDAT/uvcdat <uvcdat@noreply.github.commailto:uvcdat@noreply.github.com>
Cc: Dean Williams <williams13@llnl.govmailto:williams13@llnl.gov>
Subject: Re: [uvcdat] isoline plots don't plot on first try (#611)

can you see the file to me?

Gerald (Jerry) Potter
NASA Goddard Space Flight Center
E-mail gerald.potter@nasa.govmailto:gerald.potter@nasa.govmailto:gerald.potter@nasa.gov
Office 28:S241
Phone 707.315.8314
Analysis and Data Consultant
Department GSFC:606.2

On Sep 8, 2014, at 3:18 PM, Charles <notifications@github.commailto:notifications@github.commailto:notifications@github.com> wrote:

@potter2https://github.com/potter2 i tweaked the ninital.attriubtes it should be better now in:
issue_611_isoline_no_plot

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54896037.

—
Reply to this email directly or view it on GitHubhttps://github.com//issues/611#issuecomment-54896236.

[aashish24]

Looking into it now