v0.1.7

UP Wallet for the browser, prototype. The UP Wallet page as a desktop extension for Chrome, Edge and Brave, with this computer's own key, opened with a passkey (Windows Hello, Google Password Manager, a phone, a security key) or a password. Experimental: the maintainer's own wallet, small amounts, at your own risk. See the README.

Install

1. Download up-wallet-extension-v0.1.7.zip below (not "Source code").
2. Unzip it into a folder you will keep (Chrome loads the extension from there). The folder must contain manifest.json and up-wallet.html directly.
3. Open chrome://extensions, turn on Developer mode, press Load unpacked and choose that folder.
4. Check: UP Wallet, version 0.1.7, id bjndlbdefcelfamapgpimaiaboehehek. Pin it from the puzzle icon.
5. In the extension's Details, Site access must allow crosschain-lukso.chainintegrate.it (the gas paid by the site goes through it). If Chrome limits it, the wallet says so at the top, with Allow.

To update from an earlier version: unzip the new zip over the same folder (in Windows' "Extract all", the destination is that folder itself, not a new one inside it), then on chrome://extensions press Load unpacked again and choose the same folder. The key stays (same id). The reload button alone may keep the old version: check the version on the extension's card, then close and reopen the wallet. Never remove the extension to update it: removing it deletes its key, which has no copy.

First use

1. Press the UP Wallet icon: the wallet opens in the browser's side panel (right click on the icon: "Open UP Wallet in a tab"). Accept the warning.
2. Settings: choose the network (1) and the UP (2); in 3 · Controller (computer key) press Use this computer's key.
3. The signing window (at the top right) creates the key: Create with a passkey (Windows Hello where Windows supports it, or Google Password Manager), or Use a password (at least 12 characters, it cannot be recovered).
4. From the panel "This computer", Open the Backup page on the site: Authorize a device, with an admin controller (MetaMask), once per network. The address comes filled in (check it against the panel); give the computer a name ("Office PC · extension"), saved on the UP with the authorization, so you recognize it in the list of controllers.
5. Back in UP Wallet the check turns green: connect a dApp with WalletConnect. Every signature opens the signing window, which shows what is signed and asks for the passkey or the password. The dApp stays connected with the wallet closed, while the browser runs: a request opens the wallet by itself, in a window at the top right, which takes back the session's network and UP and checks the request as always.

Built from Cross_Chain 2c4ee9b and this repository at 262017c.

v0.1.6

UP Wallet for the browser, prototype. The UP Wallet page as a desktop extension for Chrome, Edge and Brave, with this computer's own key, opened with a passkey (Windows Hello, Google Password Manager, a phone, a security key) or a password. Experimental: the maintainer's own wallet, small amounts, at your own risk. See the README.

Install

1. Download up-wallet-extension-v0.1.6.zip below (not "Source code").
2. Unzip it into a folder you will keep (Chrome loads the extension from there). The folder must contain manifest.json and up-wallet.html directly.
3. Open chrome://extensions, turn on Developer mode, press Load unpacked and choose that folder.
4. Check: UP Wallet, version 0.1.6, id bjndlbdefcelfamapgpimaiaboehehek. Pin it from the puzzle icon.
5. In the extension's Details, Site access must allow crosschain-lukso.chainintegrate.it (the gas paid by the site goes through it). If Chrome limits it, the wallet says so at the top, with Allow.

To update from an earlier version: unzip the new zip over the same folder (in Windows' "Extract all", the destination is that folder itself, not a new one inside it), then on chrome://extensions press Load unpacked again and choose the same folder. The key stays (same id). The reload button alone may keep the old version: check the version on the extension's card, then close and reopen the wallet. Never remove the extension to update it: removing it deletes its key, which has no copy.

First use

1. Press the UP Wallet icon: the wallet opens in the browser's side panel (right click on the icon: "Open UP Wallet in a tab"). Accept the warning.
2. Settings: choose the network (1) and the UP (2); in 3 · Controller (computer key) press Use this computer's key.
3. The signing window (at the top right) creates the key: Create with a passkey (Windows Hello where Windows supports it, or Google Password Manager), or Use a password (at least 12 characters, it cannot be recovered).
4. From the panel "This computer", Open the Backup page on the site: Authorize a device, with an admin controller (MetaMask), once per network. The address comes filled in (check it against the panel); give the computer a name ("Office PC · extension"), saved on the UP with the authorization, so you recognize it in the list of controllers.
5. Back in UP Wallet the check turns green: connect a dApp with WalletConnect. Every signature opens the signing window, which shows what is signed and asks for the passkey or the password. The dApp stays connected with the wallet closed, while the browser runs: a request opens the wallet by itself, in a window at the top right, which takes back the session's network and UP and checks the request as always.

Built from Cross_Chain 2c4ee9b and this repository at 5228a4e.

v0.1.5

UP Wallet for the browser, prototype. The UP Wallet page as a desktop extension for Chrome, Edge and Brave, with this computer's own key, opened with a passkey (Windows Hello, Google Password Manager, a phone, a security key) or a password. Experimental: the maintainer's own wallet, small amounts, at your own risk. See the README.

Install

1. Download up-wallet-extension-v0.1.5.zip below (not "Source code").
2. Unzip it into a folder you will keep (Chrome loads the extension from there). The folder must contain manifest.json and up-wallet.html directly.
3. Open chrome://extensions, turn on Developer mode, press Load unpacked and choose that folder.
4. Check: UP Wallet, version 0.1.5, id bjndlbdefcelfamapgpimaiaboehehek. Pin it from the puzzle icon.

To update from an earlier version: unzip the new zip over the same folder and press the reload button of UP Wallet on chrome://extensions. The key stays (same id).

First use

1. Press the UP Wallet icon: the wallet opens in the browser's side panel (right click on the icon: "Open UP Wallet in a tab"). Accept the warning.
2. Settings: choose the network (1) and the UP (2); in 3 · Controller (computer key) press Use this computer's key.
3. The signing window (at the top right) creates the key: Create with a passkey (Windows Hello where Windows supports it, or Google Password Manager), or Use a password (at least 12 characters, it cannot be recovered).
4. From the panel "This computer", Open the Backup page on the site: Authorize a device, with an admin controller (MetaMask), once per network. The address comes filled in (check it against the panel); give the computer a name ("Office PC · extension"), saved on the UP with the authorization, so you recognize it in the list of controllers.
5. Back in UP Wallet the check turns green: connect a dApp with WalletConnect. Every signature opens the signing window, which shows what is signed and asks for the passkey or the password. The dApp stays connected with the wallet closed, while the browser runs: a request opens the wallet by itself, in a window at the top right, which takes back the session's network and UP and checks the request as always.

Built from Cross_Chain edce0bd and this repository at 7cd2946.

v0.1.4

UP Wallet for the browser, prototype. The UP Wallet page as a desktop extension for Chrome, Edge and Brave, with this computer's own key, opened with a passkey (Windows Hello, Google Password Manager, a phone, a security key) or a password. Experimental: the maintainer's own wallet, small amounts, at your own risk. See the README.

Install

1. Download up-wallet-extension-v0.1.4.zip below (not "Source code").
2. Unzip it into a folder you will keep (Chrome loads the extension from there). The folder must contain manifest.json and up-wallet.html directly.
3. Open chrome://extensions, turn on Developer mode, press Load unpacked and choose that folder.
4. Check: UP Wallet, version 0.1.4, id bjndlbdefcelfamapgpimaiaboehehek. Pin it from the puzzle icon.

To update from an earlier version: unzip the new zip over the same folder and press the reload button of UP Wallet on chrome://extensions. The key stays (same id).

First use

1. Press the UP Wallet icon: the wallet opens in the browser's side panel (right click on the icon: "Open UP Wallet in a tab"). Accept the warning.
2. Settings: choose the network (1) and the UP (2); in 3 · Controller (computer key) press Use this computer's key.
3. The signing window (at the top right) creates the key: Create with a passkey (Windows Hello where Windows supports it, or Google Password Manager), or Use a password (at least 12 characters, it cannot be recovered).
4. From the panel "This computer", Open the Backup page on the site: Authorize a device, with an admin controller (MetaMask), once per network. The address comes filled in (check it against the panel); give the computer a name ("Office PC · extension"), saved on the UP with the authorization, so you recognize it in the list of controllers.
5. Back in UP Wallet the check turns green: connect a dApp with WalletConnect. Every signature opens the signing window, which shows what is signed and asks for the passkey or the password. The dApp stays connected with the wallet closed, while the browser runs: a request opens the wallet by itself, in a window at the top right, which takes back the session's network and UP and checks the request as always.

Built from Cross_Chain edce0bd and this repository at 5d5d703.

v0.1.3

UP Wallet for the browser, prototype. The UP Wallet page as a desktop extension for Chrome, Edge and Brave, with this computer's own key, opened with a passkey (Windows Hello, Google Password Manager, a phone, a security key) or a password. Experimental: the maintainer's own wallet, small amounts, at your own risk. See the README.

Install

1. Download up-wallet-extension-v0.1.3.zip below (not "Source code").
2. Unzip it into a folder you will keep (Chrome loads the extension from there). The folder must contain manifest.json and up-wallet.html directly.
3. Open chrome://extensions, turn on Developer mode, press Load unpacked and choose that folder.
4. Check: UP Wallet, version 0.1.3, id bjndlbdefcelfamapgpimaiaboehehek. Pin it from the puzzle icon.

To update from an earlier version: unzip the new zip over the same folder and press the reload button of UP Wallet on chrome://extensions. The key stays (same id).

First use

1. Press the UP Wallet icon: the wallet opens in the browser's side panel (right click on the icon: "Open UP Wallet in a tab"). Accept the warning.
2. Settings: choose the network (1) and the UP (2); in 3 · Controller (computer key) press Use this computer's key.
3. The signing window (at the top right) creates the key: Create with a passkey (Windows Hello where Windows supports it, or Google Password Manager), or Use a password (at least 12 characters, it cannot be recovered).
4. On the site, Backup page, Authorize a device, with an admin controller (MetaMask): the key's address, as shown in the panel "This computer", once per network.
5. Back in UP Wallet the check turns green: connect a dApp with WalletConnect. Every signature opens the signing window, which shows what is signed and asks for the passkey or the password. The dApp stays connected with the wallet closed, while the browser runs: a request opens the wallet by itself, in a window at the top right, which takes back the session's network and UP and checks the request as always.

Built from Cross_Chain 3ca48df and this repository at 363c243.

v0.1.2

UP Wallet for the browser, prototype. The UP Wallet page as a desktop extension for Chrome, Edge and Brave, with this computer's own key, opened with a passkey (Windows Hello, Google Password Manager, a phone, a security key) or a password. Experimental: the maintainer's own wallet, small amounts, at your own risk. See the README.

Install

1. Download up-wallet-extension-v0.1.2.zip below (not "Source code").
2. Unzip it into a folder you will keep (Chrome loads the extension from there). The folder must contain manifest.json and up-wallet.html directly.
3. Open chrome://extensions, turn on Developer mode, press Load unpacked and choose that folder.
4. Check: UP Wallet, version 0.1.2, id bjndlbdefcelfamapgpimaiaboehehek. Pin it from the puzzle icon.

To update from an earlier version: unzip the new zip over the same folder and press the reload button of UP Wallet on chrome://extensions. The key stays (same id).

First use

1. Press the UP Wallet icon: the wallet opens in the browser's side panel (right click on the icon: "Open UP Wallet in a tab"). Accept the warning.
2. Settings: choose the network (1) and the UP (2); in 3 · Controller (computer key) press Use this computer's key.
3. The signing window (a small window at the top right) creates the key: Create with a passkey (Windows Hello where Windows supports it, or Google Password Manager), or Use a password (at least 12 characters, it cannot be recovered).
4. On the site, Backup page, Authorize a device, with an admin controller (MetaMask): the key's address, as shown in the panel "This computer", once per network.
5. Back in UP Wallet the check turns green: connect a dApp with WalletConnect. Every signature opens the signing window, which shows what is signed and asks for the passkey or the password. Keep the wallet open (side panel or tab) while a dApp is connected: requests arrive only while it is open.

Built from Cross_Chain 3ca48df and this repository at ae520f9.

v0.1.1

UP Wallet for the browser, prototype. The UP Wallet page as a desktop extension for Chrome, Edge and Brave, with this computer's own key, opened with a passkey (Windows Hello, Google Password Manager, a phone, a security key) or a password. Experimental: the maintainer's own wallet, small amounts, at your own risk. See the README.

Install

1. Download up-wallet-extension-v0.1.1.zip below (not "Source code").
2. Unzip it into a folder you will keep (Chrome loads the extension from there). The folder must contain manifest.json and up-wallet.html directly.
3. Open chrome://extensions, turn on Developer mode, press Load unpacked and choose that folder.
4. Check: UP Wallet, version 0.1.1, id bjndlbdefcelfamapgpimaiaboehehek. Pin it from the puzzle icon.

To update from an earlier version: unzip the new zip over the same folder and press the reload button of UP Wallet on chrome://extensions. The key stays (same id).

First use

1. Press the UP Wallet icon: the wallet opens in the browser's side panel (right click on the icon: "Open UP Wallet in a tab"). Accept the warning.
2. Settings: choose the network (1) and the UP (2); in 3 · Controller (computer key) press Use this computer's key.
3. The signing window (a small window at the top right) creates the key: Create with a passkey (Windows Hello where Windows supports it, or Google Password Manager), or Use a password (at least 12 characters, it cannot be recovered).
4. On the site, Backup page, Authorize a device, with an admin controller (MetaMask): the key's address, as shown in the panel "This computer", once per network.
5. Back in UP Wallet the check turns green: connect a dApp with WalletConnect. Every signature opens the signing window, which shows what is signed and asks for the passkey or the password. Keep the wallet open (side panel or tab) while a dApp is connected: requests arrive only while it is open.

Built from Cross_Chain 3166d63 and this repository at 3fbb6ff.

v0.1.0

UPSTREAM: Cross_Chain 3166d63, the merge of the device key texts (#218)

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LyvXroLy77GnnctsMuDW8x