- Download the zip file onto your computer and extract the folder.
- Transfer the contents from the zip file onto a USB thumb drive.
- Hold down the menu button then power on the fixture to put it into upload mode.
- Insert the USB thumb drive into the USB port on the rear of your fixture. The COLORband Q3BT ILS will automatically find the firmware and apply it.
- The fixture will reset itself automatically and display the new firmware version during start up.
- The USB thumb drive can be removed after the fixture restarts.
- Do not use a thumb drive greater than 32GB.
- The thumb drive must be formatted to FAT32.
- The downloaded firmware file must be placed in the root directory on the thumb drive (no folders).
- Do not disconnect from power source until the update process is complete.
- Software update
- Released software version