Missing screw holes in Base support part 1 and 2

[Johansson-D]

Hi Chris_Annin.
I just joined this "little" project. :)
The M4 holes in the Base support part 1 and 2 are missing, or should one drill them?
The M4 holes are shown in the BOM pdf on page 3.

File names:
J1 base support spacer part 1 2017.09.18
J1 base support spacer part 2 2017.09.18

Best regards and THAN YOU for sharing this/
Dahniel

[Chris-Annin]

hello, I was thinking perhaps they were not needed and just added extra work and cost so I removed them from the models. if you feel they are needed I could put them back but I thought the 4 main mounting holes would be sufficient but let me know what you think. Chris

…

On Sat, Dec 9, 2017 at 3:07 AM, Johansson-D ***@***.***> wrote: Hi Chris_Annin. I just joined this "little" project. :) The M4 holes in the Base support part 1 and 2 are missing, or should one drill them? The M4 holes are shown in the BOM pdf on page 3. File names: J1 base support spacer part 1 2017.09.18 J1 base support spacer part 2 2017.09.18 Best regards and THAN YOU for sharing this/ Dahniel — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#5>, or mute the thread <https://github.com/notifications/unsubscribe-auth/ATpgLaE74imChnLcsDO0DJ_ksFi4xx9_ks5s-mnwgaJpZM4Q8DHS> .

[Johansson-D]

Hi Chris, thanks for a quick reply. Are you saying that the M4 screw are not needed? I would be glad if you could mail the files or put them up at the website again. Because then one has the option of chosing. Best regards, Dahniel Johansson

…

On Dec 9, 2017 22:24, "Chris Annin" ***@***.***> wrote: hello, I was thinking perhaps they were not needed and just added extra work and cost so I removed them from the models. if you feel they are needed I could put them back but I thought the 4 main mounting holes would be sufficient but let me know what you think. Chris On Sat, Dec 9, 2017 at 3:07 AM, Johansson-D ***@***.***> wrote: > Hi Chris_Annin. > I just joined this "little" project. :) > The M4 holes in the Base support part 1 and 2 are missing, or should one > drill them? > The M4 holes are shown in the BOM pdf on page 3. > > File names: > J1 base support spacer part 1 2017.09.18 > J1 base support spacer part 2 2017.09.18 > > Best regards and THAN YOU for sharing this/ > Dahniel > > — > You are receiving this because you are subscribed to this thread. > Reply to this email directly, view it on GitHub > <#5>, or mute the thread > <https://github.com/notifications/unsubscribe- auth/ATpgLaE74imChnLcsDO0DJ_ksFi4xx9_ks5s-mnwgaJpZM4Q8DHS> > . > — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#5 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AgzRsqUFul-903m7mpIOL1H37yE6O5tfks5s-vp9gaJpZM4Q8DHS> .

[Johansson-D]

Hi Chris.
Did you put up the files somewhere?
I feel that they are needed.
Best regards,
Dahniel

[Chris-Annin]

I believe if you go to Code, then click on commits and go to may 29th 2017 and click view repository at this point in time you should find the earlier print files.

https://github.com/Chris-Annin/AR2/tree/20a7b994f84574137bca8c4c3074bd3974aa6010

[Johansson-D]

I found them here:
https://github.com/Chris-Annin/AR2/blob/fe274c6ada36cc75682504b6163ea55a67c506cc/AR2%20print%20files.zip

Thx Chris

[Chris-Annin]

updated design calls for (x2) 4mm dowels rather than wasted expense on many screws.