Skip to content
Barometer and Altimeter Sensor
Other Python C Java
Branch: master
Clone or download
Fetching latest commit…
Cannot retrieve the latest commit at this time.
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
Arduino
C
Java
Onion_Omega_Python
Particle
Python
.categories
HP206C_I2CS.png
README.md

README.md

HP206C

HP206C

HP206C Barometer and Altimeter Sensor.

The HP206C is a device that measures the altitude, pressure and the temperature by an internal 24-bit ADC

This Device is available from ControlEverything.com [SKU: HP206C_I2CS]

https://www.controleverything.com/content/Analog-Digital-Converters?sku=HP206C_I2CS

This Sample code can be used with Raspberry Pi, Arduino, Particle Photon, Beaglebone Black and Onion Omega.

Java

Download and install pi4j library on Raspberry pi. Steps to install pi4j are provided at:

http://pi4j.com/install.html

Download (or git pull) the code in pi.

Compile the java program.

$> pi4j HP206C.java

Run the java program.

$> pi4j HP206C

Python

Download and install smbus library on Raspberry pi. Steps to install smbus are provided at:

https://pypi.python.org/pypi/smbus-cffi/0.5.1

Download (or git pull) the code in pi. Run the program.

$> python HP206C.py

Arduino

Download and install Arduino Software (IDE) on your machine. Steps to install Arduino are provided at:

https://www.arduino.cc/en/Main/Software

Download (or git pull) the code and double click the file to run the program.

Compile and upload the code on Arduino IDE and see the output on Serial Monitor.

Particle Photon

Login to your Photon and setup your device according to steps provided at:

https://docs.particle.io/guide/getting-started/connect/photon/

Download (or git pull) the code. Go to online IDE and copy the code.

https://build.particle.io/build/

Verify and flash the code on your Photon. Code output is shown in logs at dashboard:

https://dashboard.particle.io/user/logs

C

Setup your BeagleBone Black according to steps provided at:

https://beagleboard.org/getting-started

Download (or git pull) the code in Beaglebone Black.

Compile the c program.

$>gcc HP206C.c -o HP206C

Run the c program.

$>./HP206C

Onion Omega

Get Started and setting up the Onion Omega according to steps provided at :

https://wiki.onion.io/Get-Started

To install the Python module, run the following commands:

opkg update
opkg install python-light pyOnionI2C

Download (or git pull) the code in Onion Omega. Run the program.

$> python HP206C.py

#####The code output is the altitude in meters, pressure in Pa and temperature reading in degree celsius and fahrenheit

You can’t perform that action at this time.