Skip to content

Releases

Pipster 1.4.1 - Smarter Pipes, Better Control

Choose a tag to compare

@CptGummiball CptGummiball released this 16 Nov 19:01

1.4.1 follows directly on 1.3.0; there was no public 1.4.0. Everything below is new compared with 1.3.0.

Worlds from 1.3.0 load without any conversion: the save format only gains new optional keys, and ports
without them behave as in 1.3.0 (upgrade test 1.3.0 → 1.4.1 passed on all ten files). Two things change in existing worlds: see
"Crafters are never emptied" and "Gaseous fluids of other mods" below.
Mods built against the Pipster API keep working: the API is unchanged (pipster-api-1). Client and
server must use the same Pipster version, as before.

Supported Minecraft versions

1.4.1 is made for Minecraft 1.21.1, 1.21.11, 26.1.2, 26.2 and 26.3, each for Fabric and
NeoForge, as in 1.3.0. There are ten files, one per Minecraft version and loader, for example
pipster-1.4.1+mc1.21.1-fabric.jar or pipster-1.4.1+mc26.1.2-neoforge.jar. No file covers
several Minecraft versions.

Minecraft 26.3 now needs Fabric API 0.165.2+26.3 or newer, or NeoForge 26.3.0.100 or newer. WTHIT and the
library GuideMe (needed by Powah!) need these builds. The other versions need the same loader builds as in 1.3.0.

If you play on another Minecraft version, Pipster 1.2.0 stays available for 1.21.1 to 26.3 and
keeps working. Builds for further versions only come back if enough players ask for them; please
say so in the issue tracker.

New

The first four points are based on feedback from a modpack team.

Quicker wrench controls

Action with the Conduit Wrench Effect
Right-click a port next mode: insert, extract, both, off (an accept port: accept, off)
Sneak + right-click a port open the port screen
Left-click an arm disconnect it; left-click the same side of the centre again to reconnect
Sneak + left-click a port paste the active copy profile (see below)
Sneak + right-click an arm without a port disconnect or reconnect it, as before
Sneak + right-click the centre dismantle the pipe, as before
Sneak + right-click into the air select the next copy profile, as before
  • The action bar says what happened, for example "West: Extract".
  • The wrench no longer breaks pipes by left-click. A held left-click in creative mode acts only once.
  • Servers that prefer the old controls set wrenchClassicControls=true in config/pipster-server.properties.
    Then right-click opens the port screen and sneak + right-click on an arm disconnects it, as in 1.3.0;
    left-click does nothing.

Separate filters for insert and extract

A port in mode Both can have one filter for what goes into the block and another for what comes out.
The button under the card slots switches between "Filter: both" (one filter for both directions, as before),
"Filter: in" and "Filter: out". Sneak + click returns to one filter; the out list is then discarded.
The installed filter card unlocks both lists with the same number of rules. In the other modes the port has one
filter, as before.

Choose the face of the target block

Some blocks take items only on certain faces: a brewing stand takes ingredients only from the top. The new
button under the card slots ("Face: auto", "Face: top", "Face: bottom", "Face: north" ...) picks which face
of the target block the port uses. Click: next face, sneak + click: previous face. The tooltip names the block.
It is still the same block next to the pipe, with the same reach and the same claim check.
Jade and WTHIT show a face that is not the facing side.

Pasting a profile also installs the cards

A copy profile now remembers which filter card and whether a rule card the copied port had. Pasting it (Paste
button or sneak + left-click) moves matching cards from your inventory into the port. A card that is replaced
goes back to your inventory; if the inventory is full, it is dropped. Cards are never created, also not in
creative mode. If a card is missing, the settings are pasted anyway and the action bar names the missing card.
Profiles copied with 1.3.0 still paste their settings, without cards.

Card tooltips

The tooltip of the Precision Filter Card now says what it adds: keep an amount in the source, fill the target up
to an amount.

New integrations (all optional)

None of these mods is required. Without them, nothing changes.

  • JEI and REI: drag an item (item pipes) or a fluid (fluid and gas pipes) from the recipe viewer onto a
    filter field of the port screen to set it as the filter pattern.
    • Only the id is sent. The server checks the open port, your rights and that the id fits the pipe: items on
      item pipes, normal fluids on fluid pipes, gaseous fluids on gas pipes. No item is ever created.
    • Only fields that the installed filter card unlocks accept a drop.
    • Item components (enchantments, names) are not taken over by a drag; click with the item in your hand for
      that, as before.
  • WTHIT: looking at a pipe, tesseract or pulse amplifier shows the same information as with Jade. Channel
    names are shown only to players who have access to the channel.
  • Flan: pipes and tesseracts do not reach across a claim border unless both sides allow it with Flan's
    "piston border" flag. This is the rule Flan applies to pistons. It also works while the owner is offline.

Changed

  • Crafters are never emptied. A port at a crafter no longer takes items out of its crafting grid, in any mode
    (issue #2). The crafter has no output slot: when it crafts,
    it pushes the result out of its front. A port in Extract or Both at the crafter's front takes that result
    into the network; Insert and Both still fill the crafter.
    • Pipes now fill a crafter evenly, one item per slot, like a hopper. Until now a pipe put all items into the
      first free slot, so a crafter fed by a pipe could not craft. (Block tag #pipster:insert_one_by_one: items go
      into these blocks one at a time.)
    • The port screen says "Never emptied: takes only what
      the block pushes out" when a port at such a block is set to take items out.
    • For a crafter that is filled and emptied by the same pipe, use one port in Both at its front with separate
      filters (see above): "Filter: in" = the ingredients, "Filter: out" = the result. Automated tests on all ten
      files fill a crafter this way, let it craft and check that the result arrives and nothing is lost.
    • Existing worlds: an Extract or Both port at a crafter stops taking ingredients out of the grid after the
      update. The rule is the block tag #pipster:no_extract; a datapack can add other blocks to it or replace it
      with an empty list to get the 1.3.0 behaviour back.
    • Tesseract sides follow the same rule, and now also #pipster:energy_no_insert, which until now only applied
      to pipe ports.
  • Gaseous fluids of other mods travel in gas pipes. The fluid tag #pipster:gaseous now lists fluids that
    other mods model as gases: oxygen and hydrogen (Ad Astra), the gases and steams of Modern Industrialization, and
    the gases and helium plasma of Tech Reborn. The entries are optional, so the tag loads without these mods.
    • Existing worlds: such a fluid in the buffer of a fluid pipe becomes a locked entry after the update. It
      is kept, never lost, but no longer delivered by the fluid pipe. To keep the 1.3.0 behaviour, a datapack can
      replace the tag with an empty list.
  • Moving Pipster blocks with Carry On, Create contraptions or the Mekanism cardboard box: automated tests now
    move a pipe (with buffer and filter card) and a tesseract (with channel binding) the way these mods do.
    Buffers, cards and bindings move with the block, nothing is dropped or duplicated, and the network keeps working
    afterwards. Nothing had to change in Pipster for this.
  • CC: Tweaked: getPort and getPorts also report face (when the port uses another face than the facing
    side) and separateFilters (when a port in mode Both has separate filters).

Performance

1.4.1 adds port settings and integrations; the transport code only gained the face choice, the separate out filter
and the crafter rule. To check that, 1.3.0 and the development build of 1.4.1 without the crafter rule ran in
alternating order on 2026-11-14 on an Intel Core i7-13700H, scene
"50,000 pipes, 500 active ports" (8 rounds each on 1.21.1, 4 rounds each on 26.3; each run 1 minute warm-up and
5 minutes of measurement). Medians of Pipster's own time per tick:

Minecraft / loader Mean, 1.3.0 → 1.4.1 p95, 1.3.0 → 1.4.1
1.21.1 Fabric 2.73 → 2.75 ms 4.27 → 4.32 ms
1.21.1 NeoForge 2.60 → 2.50 ms 4.20 → 4.10 ms
26.3 Fabric 2.70 → 2.66 ms 4.28 → 4.27 ms
26.3 NeoForge 2.72 → 2.98 ms 4.69 → 4.89 ms

No measurable difference on any of the four: the differences stay within the spread between rounds, and the
+10 % on 26.3 NeoForge comes from a single round. The crafter rule was added afterwards (one block tag check when
a port looks up its target block) and was not measured separately. Details are on the wiki page
Performance. The numbers only apply to that hardware
and that test scene; they are no promise of 20 TPS on any hardware.

Compatibility

  • Built-in integrations: Jade, CC: Tweaked, Open Parties and Claims, FTB Chunks, FTB Teams and permission mods as
    in 1.3.0, now also JEI, REI, WTHIT and Flan, wherever they exist for the Minecraft version.
  • Every 1.4.1 file was started unchanged with the real partner mods of its Minecraft version (dedicated server,
    client and game tests): passed on 2026-11-16, 318 runs passed, none failed. As
    before, Open Parties and Claims is checked on the dedicated server, because...
Read more

Pipster 1.3.0

Choose a tag to compare

@CptGummiball CptGummiball released this 10 Nov 18:25

Pipster 1.3.0

Worlds from 1.2.0 load without any conversion: the save format and the block state names are
unchanged (tested on all five Minecraft versions, both loaders).
Mods built against the Pipster API keep working: the API is unchanged (pipster-api-1). Client and
server must use the same Pipster version, as before.

Supported Minecraft versions

1.3.0 is made for Minecraft 1.21.1, 1.21.11, 26.1.2, 26.2 and 26.3, each for Fabric and
NeoForge. There are ten files, one per Minecraft version and loader, for example
pipster-1.3.0+mc1.21.1-fabric.jar or pipster-1.3.0+mc26.1.2-neoforge.jar. No file covers
several Minecraft versions.

If you play on another Minecraft version, Pipster 1.2.0 stays available for 1.21.1 to 26.3 and
keeps working. Builds for further versions only come back if enough players ask for them; please
say so in the issue tracker.

New look

Pipes and cables have new models and textures. The tube shows the kind, the node and the flange
show the tier.

  • Kinds:
    • Item pipe: square copper tube.
    • Fluid pipe: round iron-grey tube.
    • Gas pipe: round petrol (dark teal) tube.
    • Energy cable: narrower square anthracite cable with fine insulation rings.
  • Tiers: the node (the chamfered cube in the middle) and the flange have the colour of the tier.
    • T1 Copper: copper
    • T2 Reinforced: gold
    • T3 Precision: emerald green
    • T4 Resonant: lapis blue
    • T5 Quantum: amethyst purple
    • T6 Singularity (energy only): redstone red
    • Creative cable: magenta with white bolts
  • Connections: a flange with four bolts only where a pipe meets a machine. Between two pipes
    there is a slim coupling. Open sides show only the node.
  • Pipes stay narrow shapes, never full blocks, and the hitbox follows the pipe.
  • Throughput, tiers, recipes and behaviour are unchanged.
  • In worlds from 1.2.0, pipe sides at machines get their flange on the first refresh.

Fixes

  • The status line of an open port screen now updates while the screen is open. Before, it only
    updated when the screen was opened or a card changed, so it could keep showing "offline" after a
    chunk had loaded.

Performance

1.3.0 only changes models, textures and the refresh of the port screen. The transport code did not
change in a way that matters for performance, so 1.3.0 was not measured again.

The latest numbers were measured with 1.2.0 on an Intel Core i7-13700H with 50,000 pipes and
500 active ports. Details are in the 1.2.0 changelog and on the wiki page
Performance. They only apply to that
hardware and that test scene; they are no promise of 20 TPS on any hardware.

Compatibility

  • The built-in integrations are the same as in 1.2.0 for these five Minecraft versions: Jade,
    CC: Tweaked, Open Parties and Claims, FTB Chunks, FTB Teams and permission mods, wherever they
    exist.

  • Every 1.3.0 file was started unchanged with the real partner mods of its Minecraft version
    (dedicated server, client and game tests). Same result as 1.2.0: 188 runs passed, none failed.

  • CC: Tweaked on NeoForge 26.3 still does not start on its own (an error in CC: Tweaked 1.120.3).
    Pipster's support is included and will work once CC: Tweaked is updated.

Beyond the Limits

Choose a tag to compare

@CptGummiball CptGummiball released this 31 Oct 11:37

Pipster 1.2.0 – Beyond the Limits

Worlds from 1.1.0 load without any conversion: the save format is unchanged and the new blocks only add new IDs (tested on 1.21.1 and 26.3, both loaders). Mods built against the Pipster API keep working: the API is unchanged. Client and server must use the same Pipster version, as before.

Note: supported Minecraft versions from Pipster 1.3.0 on

1.2.0 is the last version built for every Minecraft version from 1.21.1 to 26.3. From 1.3.0 on, Pipster is developed only for Minecraft 1.21.1, 1.21.11, 26.1.2, 26.2 and 26.3 (Fabric and NeoForge). These versions were chosen by how many players use them. Fewer versions mean much less work per release, so updates and fixes can come out faster.

If you play on another version, 1.2.0 stays available and keeps working. Builds for further versions only come back if enough players ask for them; please say so in the [issue tracker](https://github.com/CptGummiball/Pipster/issues).

New

  • Singularity Energy Cable (tier 6): 32,768,000 E/t per segment, eight times the Quantum cable. Energy only; there are no item, fluid or gas pipes of this tier.

    • Craft 8 empty Quantum Energy Cables around a Singularity Core into 8 Singularity cables, or use a Singularity Upgrade Bolt on a placed Quantum Energy Cable.
    • Singularity Core: 4 netherite ingots, 4 Quantum Cores and 1 nether star make 4 cores. One core makes 8 bolts.
  • Supercalifragilisticexpialidocious Energy Cable, creative only.

    • Practically unlimited: 1,000,000,000,000 E/t per segment. The limit is finite on purpose, so nothing can overflow.
    • It still uses the normal budgets: a thinner cable between two of these keeps its own limit.
    • No recipe, no upgrade path, and it drops nothing when broken, so it never reaches survival play. Energy buffered in a broken creative cable is lost.
    • Machines of other mods still decide how much they accept. NeoForge energy storage takes at most about 2.1 billion FE per call.
  • The Pulse Amplifier keeps its own pulse limit on the new cables: up to 64,000 E/t with eight capacitor banks and the default config. The cable no longer limits it there.

  • Fluid and gas pipes: filter field with suggestions. Type a name or an ID and pick a fluid or gas from the list, no filled container needed.

    • Use the arrow keys, Tab or Enter to pick, Esc to hide the list; the mouse works too.
    • Gas pipes list gaseous fluids, gases of the Pipster API and, with Mekanism (NeoForge 1.21.1), Mekanism chemicals. Each entry shows its type.
    • When two entries have the same name (for example "Oil" from two mods), each shows its mod in brackets.
    • # lists the fluid tags of the pipe's type. "Everything from " sets a rule for a whole mod.
    • The server checks every entry: a fluid pipe never takes a gas ID and the other way round.
    • Item pipes keep the plain text field.

Performance

Pipster does the same work in fewer steps: the budgets of a route are built once per route, the budgets of one transfer are booked in one call, and pipe buffers tell their neighbours about changes once per tick and pipe instead of after every single change. Throughput, limits and results are the same as in 1.1.0; chunks are still marked for saving at once.

Measured performance improvements compared to 1.1.0:

  • Minecraft 1.21.1 Fabric: 11% lower average tick time.
  • Minecraft 1.21.1 NeoForge: 10% lower average tick time.
  • Minecraft 26.3 Fabric: 11% lower average tick time.
  • Minecraft 26.3 NeoForge: No measurable change.

Pipster 1.1.0 Overcharge

Choose a tag to compare

@CptGummiball CptGummiball released this 26 Oct 13:53

Update recommended for everyone. Worlds from 1.0.0 load without any conversion (tested on 1.21.1 and
26.3, both loaders). Mods built against the Pipster API 1.0.0 keep working without an update: the
API is unchanged. Client and server must use the same Pipster version, as before.

Bug fixes

  • No more duplication with compacting drawers on Fabric. Pipster now moves resources in the
    usual Fabric order: probe the source, insert, then take out exactly what the target accepted. A
    round trip through real Storage Drawers compacting drawers now ends with exactly the value that
    went in (tested on both loaders on nine Minecraft versions from 1.21.1 to 26.3).
  • Blocks that do not undo a cancelled transfer correctly can no longer duplicate or lose
    anything.
    Pipster checks the source after a cancelled probe; if the amount changed, the port is
    paused ("Quarantined: faulty foreign handler") until you change its settings, and the problem is
    logged.
  • Blocks that push without naming a side now reach the pipe (for example Oritech's
    Schrödinger's Safe on Fabric), when the pipe has exactly one Extract/Both port of that kind there.
  • Cables of other mods notice a port that was switched to Extract later (for example Powah,
    Energized Power and Oritech energy cables): the neighbour gets one block update when a pipe side
    starts or stops accepting.
  • Storage that appears later is found. NeoForge: a side next to a block without storage watches
    for the block to offer one (for example after a Mekanism side configuration change or a storage
    upgrade). Fabric: such sides are checked again every few seconds, within the work budget.
  • NeoForge: handlers that never report changes are looked up again from time to time (for
    example drawer controllers), so ports do not get stuck on an old view.
  • NeoForge up to 1.21.8: item slots with large limits move at full speed (for example drawers
    and limited barrels), and every slot loop is bound to the work budget.

New compatibility

  • Mekanism chemicals (NeoForge 1.21.1, Mekanism 10.7): gas pipes move hydrogen, oxygen, steam,
    sodium, coolants, fuels and waste between Mekanism blocks. Radioactive chemicals are released as
    radiation when a pipe is broken and never travel in the dropped item.
  • Create Mechanical Arm (NeoForge 1.21.1, Create 6.0.10): the arm can target item pipe sides and
    puts items into the pipe through the normal budgets.
  • Tested with real partner mods (dedicated server, client and all game tests, including round
    trips of items, fluids and energy through their blocks with a check that nothing is lost or
    created):
    • Storage Drawers and Energized Power: 1.21.1, 1.21.4, 1.21.5, 1.21.8, 1.21.10, 1.21.11, 26.1.2,
      26.2 and 26.3, both loaders
    • Sophisticated Storage: NeoForge on the same versions; Fabric 1.21.1 (unofficial port)
    • Oritech: 1.21.1 both loaders; NeoForge 26.1.2 (beta)
    • Powah!: NeoForge 1.21.1; 26.1.2 (alpha)
    • Mekanism and Create: NeoForge 1.21.1
    • Applied Energistics 2 (also with Applied Mekanistics) and Immersive Machinery: start and run
      together with Pipster
  • Datapack tags: pipster:energy_no_insert (ports never push energy into these blocks; default:
    the Powah! reactor parts) and pipster:extract_warning (an Extract port at these blocks warns that
    it may pull storage media out; default: ME Drive, ME Chest, IO Port, QIO Drive Array).

New features

  • Energy Pulse Amplifier, Capacitor Bank and Pulse Coil. The amplifier takes energy evenly,
    stores it at 90 % efficiency and releases it for a short time at a higher rate than it takes. It
    never creates energy.
    • Front = output, every other side = input; the pulse respects the cable at the front.
    • Up to 8 Capacitor Banks around it add capacity and pulse power.
    • Modes Auto, Charge and Pulse (fired by redstone or the Fire button), adjustable pulse target,
      status Charging / Ready / Pulsing / Empty.
    • Spinning coil that glows during a pulse, charge lights, sparks and own sounds.
    • Defaults (server config): 1,000,000 E store + 1,000,000 E per bank, input 16,000 E/t, pulse
      32,000 E/t + 4,000 E/t per bank.
    • Breaking it keeps the energy in the item; creative pick-block never copies it.
    • Jade shows charge and status; CC: Tweaked can read it (getAmplifier()).
  • Accept port: a pipe side next to a block that pushes but offers no storage of its own (AE2
    Export Bus, Create funnels, Oritech item and fluid pipes) can be set to Accept in the normal
    port screen. It takes what the block pushes in and never pulls.
  • Fabric: energy ports in Extract or Both mode actively pull energy, like on NeoForge (config
    fabricEnergyPull, on by default). Generators that push to the wrong side or not at all now work.
    This changes existing Fabric worlds: an Extract port next to a battery now drains it.
  • New energy ports next to a block that only gives start in Extract mode. Saved ports are never
    changed.
  • Port hints: "Machine only gives: set this port to Extract" and the storage-media warning.
  • New logo and mod icon in the look of the QuantaNetwork (Pipster, QuantaVolt, QuantaWorks,
    QuantaRift).

Requirements and other changes

  • NeoForge minimum raised for 26.1.2 (26.1.2.122), 26.2 (26.2.0.93) and 26.3 (26.3.0.97, the first
    release after the betas), because current partner mods need these builds.
  • New config keys are added to an existing file with their defaults; existing keys keep their
    meaning.

Initial Release

Choose a tag to compare

@CptGummiball CptGummiball released this 01 Oct 11:10

This is the initial Release of the mod.