Docs review and the district simulators plan
- Home, Node-Lite, DCC-EX, LocoNet Adapter, Architecture, RocNet on the Mesh, Module and
Layout Files: brought up to date (GCA101 stage 2, lite servers and failover, turnouts
on DCC-EX, sensors as RocNet, the module editor, O6 answered); two broken anchors and
the Node-Lite button table fixed.
- New page District Simulators and Train Tracking: the plan, steps 1 to 5 built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LocoNet adapter: panels as an occupancy display (--show-sensors), simulated detectors; dispatcher loco count per district
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LocoNet adapter: LocoNet over UDP, stage 2 on an Intellibox I, turnouts as the command station
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LocoNet adapter: the node releases a slot as COMMON with its own speed steps
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Serial LocoNet interface, Intellibox I stage 2 and the node file as TOML
LocoNet adapter: the serial interface (--loconet-serial) with the settings
for the Intellibox I's RS232 port, a LocoBuffer-USB and the Intellibox II;
the status now matches the slot owners; stage 2 uses the Intellibox I
(65000) with its config file and first bench steps; L-Q4 answered, L-Q3
partly; new L-Q8 (the Intellibox's own controls on LocoNet) and L-Q9 (its
fast clock). The release byte was given as B5 slot 03, which is FREE: COMMON
is 13, and the code's bug is noted.
Module and layout files: the node file is implemented as a TOML config file
(--config). DCC-EX adapter: node ids MacBook, RaspberryPi and Windows, and
the config file. Home and FRED pages: status and defaults.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
LocoNet adapter: loco transfer onto the slot master, Rocrail findings, address range
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Record the node as LocoNet slot master and the dual-track simulation
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hive-Rail commands the fast clock; add implementation status
RocNet on the Mesh §7 now has Hive-Rail as clock master (decision
R11), an implementation status table and the stage 1 setup over
LocoNet TCP. The LocoNet Adapter documents slot 123 as recorded from
Rocrail with JMRI's encoding, and what is implemented. Home shows the
current focus with its state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Power is per district, with a global emergency stop
Adds decision R10: on, off and emergency stop switch only the
receiving district. The only layout-wide action is the explicit
global emergency stop, a RocNet halt on rn/cs/all. Updates routing,
the LocoNet mapping, diagrams, Home and the architecture spec, and
marks the FRED page's layout-wide power section as superseded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Make RocNet the mesh protocol and defer FRED support
- New page RocNet on the Mesh: RocNet frames on routed Zenoh keys,
global power, halt and short reporting, fast clock, loco commands,
devices, edge adapters, dashboard, stage 1 test with Rocrail,
decisions R1-R9 and open questions, based on the official RocNet
protocol page.
- New page LocoNet Adapter: LocoNet centrals and module LocoNet
devices as an edge adapter translating to RocNet, with the LocoNet
message reference and the stage 2 Intellibox test.
- The LocoNet distributed master page becomes FRED Throttles and the
Distributed Master, marked deferred.
- Architecture, Home and the RocNet compatibility page point to the
new structure; FRED support becomes roadmap phase 8.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>