Docs review and the district simulators plan
- Home, Node-Lite, DCC-EX, LocoNet Adapter, Architecture, RocNet on the Mesh, Module and
Layout Files: brought up to date (GCA101 stage 2, lite servers and failover, turnouts
on DCC-EX, sensors as RocNet, the module editor, O6 answered); two broken anchors and
the Node-Lite button table fixed.
- New page District Simulators and Train Tracking: the plan, steps 1 to 5 built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Signals: new pages Signal Faces and Choosing and Placing Signals; sensors as RocNet
- Signal Faces: every DB LED signal Hive-Rail draws, each aspect pictured, as faces and
panel tiles, with the Viessmann models and the one-red option.
- Choosing and Placing Signals: which signal goes where and what it shows, as SpDrS60
panels (two animated), Ks, shunting, the common mistakes, which Viessmann models to buy,
wiring them with MobaLedLib, and the sources (Ril 301, EBO §14, Wikipedia, Viessmann,
MobaLedLib).
- Architecture §2.2: RocNet for what a RocNet tool should understand, JSON for Hive-Rail's
own state; RocNet on the Mesh §9: nodes report their detectors as RocNet sensor reports.
- Home and Module and Layout Files link and use the new signal tiles.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Docs: global go and the GLOBAL state line, lite node heartbeat fields, dispatcher keys, Home focus
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Loco register, slot translation and the LocoNet buffer
FRED page section 14: the loco register by address, throttle numbers
for throttle buses, slot ownership per LocoNet connection with
translation, how a FRED gets and keeps a loco (dispatch, reconnect,
purge, knob check), the Rocrail slot server finding, and dispatch as
the next step. README-level status on Home and RocNet on the Mesh.
Node board page: the LocoNet buffer as built.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Dispatcher screen and slot sync check
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Update status: DCC-EX on the 2021 board, node board in progress
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Record the node as LocoNet slot master and the dual-track simulation
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Use the [DCC-EX] log tag in the dashboard description
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add the DCC-EX adapter page and the Rocrail clock test
New DCC-EX Adapter page: connection, commands and replies, overload
reporting from the EX-CommandStation source, the fast clock and the
recorded ESP32 transcript. RocNet on the Mesh records the Rocrail
fast clock test and the updated implementation status. The
architecture spec notes the known DCC-EX overload token.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Hive-Rail commands the fast clock; add implementation status
RocNet on the Mesh §7 now has Hive-Rail as clock master (decision
R11), an implementation status table and the stage 1 setup over
LocoNet TCP. The LocoNet Adapter documents slot 123 as recorded from
Rocrail with JMRI's encoding, and what is implemented. Home shows the
current focus with its state.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Power is per district, with a global emergency stop
Adds decision R10: on, off and emergency stop switch only the
receiving district. The only layout-wide action is the explicit
global emergency stop, a RocNet halt on rn/cs/all. Updates routing,
the LocoNet mapping, diagrams, Home and the architecture spec, and
marks the FRED page's layout-wide power section as superseded.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Make RocNet the mesh protocol and defer FRED support
- New page RocNet on the Mesh: RocNet frames on routed Zenoh keys,
global power, halt and short reporting, fast clock, loco commands,
devices, edge adapters, dashboard, stage 1 test with Rocrail,
decisions R1-R9 and open questions, based on the official RocNet
protocol page.
- New page LocoNet Adapter: LocoNet centrals and module LocoNet
devices as an edge adapter translating to RocNet, with the LocoNet
message reference and the stage 2 Intellibox test.
- The LocoNet distributed master page becomes FRED Throttles and the
Distributed Master, marked deferred.
- Architecture, Home and the RocNet compatibility page point to the
new structure; FRED support becomes roadmap phase 8.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>