Pico-Examples

Example firmware for the DMX Core Pico and Pico 2.

Examples

• Blink - Blinks the various LEDs and outputs
• DmxRepeater - Reads DMX frames from port A, outputs to port B
• DmxTriggerOutput - Reads DMX frames from port A, channel 1-4 drives digital output 1-4
• InputTriggerDmx - Outputs DMX frames on port A. Digital input 1 sets all DMX channels to either 255 or 0
• UartInput - Set up UART via PIO for RX and TX

Build Instructions (Windows)

• Open the `Pico - Developer Command Prompt'. Navigate to the folder of the example.
• Run build.bat, which will make the example using CMake.
• Hold down BOOTSEL and power the DMX Core Pico/Pico2 to a power source/USB.
• Copy the xxxxxx.uf2 file from the build folder under the example to the RPi-Boot volume
• Enjoy

Note that you can also flash the Pico/Pico2 using a Raspberry Pi DebugProbe connected to the SWD debug port, however it's harder to reach with the enclosure on.

Documentation: https://docs.dmxcore.com/dmx-core-pico-2/