Welcome to my WhoIsHome scanner! This tool scans your home network with the tool arp-scan (only dependecy).

The new updated version of this script with a User Interface is available at https://github.com/DartLazer/WhoIsHomeUI

This tool requires ROOT priviliges because of ARP-SCAN

ABOUT THIS SCRIPT

After completing a scan of the desired IP-Range (specified in the config file) it will tell you wether your targets (also specified in the cfg file) are at home or not. A target is considered not at home if it misses more scans that the not_home_threshold (config file again). The reason I built it like this is because I discovered most Apple devices switch off Wi-Fi while not used for a while, and this way you prevent a lot of false not home triggers.

In my experience setting this value between 15-20 scans (15-20 minutes) prevents most false positives. At the moment the script is built this way so that when a target leaves- or comes home the specified email address in the config file will be sent an e-mail. You could also replace this function (email-sender) with something else you desire, like switching on- or off lights.

I built this as a project to expand my pyhton skills so any feedback is welcome. I will most likely improve on this project in the future.

INSTRUCTIONS Install dependecy sudo apt install arp-scanner

Before running first time edit the CFG file.

• file name reverse to the name of the 'database' storage file. (picke file) by default it will save to filename datastorage
• Set internet adapter (ifconfig in command to get the correct name)
• Set the ip-subrange (i.e. 192.168.2. (END WITH A DOT VERY IMPORTANT)
• set the ip min and max (lets say you want to scan 192.168.2.1 until 192.168.2.100 you set ip min to 1 and ip max to 100)
• The not-home threshold refers to how many scans (by default script scans every minute) a client can miss before it is set to 'not home'. This is due to most apple devices switch off Wi-Fi when in idle mode for a while and only occasionally come online. (in my experience settings this to 15-20 works fine.
• set the from and to email address and password
• set targets in the target section. Should be in format: name = macaddress(in AA:AA:AA:AA:AA:AA format)
• I run this program in the background with the following command: sudo python3 main.py > /dev/null 2>&1 &
• The program should automatically e-mail you upon arrivals/depatures. But if you want to check the current database run the script: database_checker.py this script will give you a terminal print of the current database.