nerd-deck 0.6.0

What's changed

Everything since v0.5.1.

Features

• GPU and busiest program on System, disk activity on Storage (684777a)
  The System tab's RAM and swap share one memory card, and the freed slot
  shows the discrete GPU (NVIDIA via nvidia-smi, or AMD): usage, temperature
  and VRAM, left alone while it's powered down. PCs without one show the
  busiest program instead. Storage cards show each disk's read and write rates.
• colour the CPU temperature by configurable thresholds (aa01fc8)
  The System tab shows the CPU temperature orange from display.temp_warm
  and red from display.temp_hot, set on the settings window's Device page.
  The clock now sits on the left under the gauge and the temperature on the
  right, so neither moves as the other changes width.
• preset button actions, URL buttons and coloured tab icons (df33fd2)
  The button editor picks what a button does from ready-made actions (the
  default buttons' and a few more), opening a URL, or running any program;
  it's still saved as the button's command. The image note goes. On the deck
  and in settings, the System tab's icon is the logo's bars, and each tab's
  icon takes its own colour while open.
• choose how long the deck stays on while the PC is away (8344f5b)
  display.off_after (minutes, up to an hour, 0 never) replaces the on/off
  off_when_away. The settings window also writes [display] as a real
  section before the buttons, and turns the inline table an earlier build
  wrote into one.
• tab order, start tab, brightness and power saving for the deck (a9e354f)
  A Deck tabs page in the settings window sets the order of the deck's tabs,
  and the Device page's display settings now work: the tab it opens on,
  brightness, dimming when idle and turning off while the PC is away. They go
  to the deck in a new display message (protocol v6), which keeps them in
  flash so they apply from power-on.

Chores

• release: 0.6.0 (b043502)

Full diff: v0.5.1...v0.6.0