This project is the Arduino IDE code for programming an M5StickC (ESP32 based) to monitor a TeamSpeak 3 server.
It is a port from my TeamSpeak-3-Monitor-ESP8266 project with changes made to take advantage of features of the M5StickC and the ESP32 in general.
It creates a simple web page accessed through port 90 on the device's IP address (accessible through a browser with an address like: 192.168.1.44:90 ) that shows the simple layout of the server's channels and the clients logged in to them. The M5StickC has a built in LED which is used for indicating that the server has people logged in. It also has a built in colour TFT display which is used to show a count of clients as well as the names of people who log in or out via a scrolling ticker-tape style message on the screen.
The new features added include the following:
- Device rotation detection. Flips the screen when the M5StickC is turned over.
- Smooth scroll messages. Instead of scrolling one character at a time it now scrolls pixel by pixel.
- Colour display instead of monochrome.
Planned features in comming updates:
- Dual core functionality to make the display and WiFi routines run on different cores.
- Screen off timer to save power. To wake up on button press or client number update from the server.
- A battery status indicator in the display.
How to use:
- Open up the Arduino IDE and chose from the file menu "Open..."
- Navigate to where you downloaded the Git project and in the folder "TeamSpeakMonitorM5StickC" select the .ino file of the same name as the folder.
- Go to the Globals.h tab and replace "your-ssid" with the ID of your WiFi connection and replace "your-pass" with the password.
- Further down in the file change telnetHost address to the address of your TS3 Server.
- Next edit the queryLogin and queryPass entries to match the credentials given to you by your TS3 server for remote queries. (See note below)
- Make sure the correct device is selected in the Tools menu and its correct COM port is selected.
- Compile and upload the sketch.
Note: If you do not have the serveradmin credentials for server queries that are given out by the server on first bootup after install (along with the server admin token) then an administrator can give remote query access to a user on the server, it will produce a password for them to use to login to the query server. Set queryLogin to the user name and queryPass to the password given.
Here is a photo of the M5StickC running the sketch:
