OLED_96 (NRF52)

OLED_96 is a simple C library for working with SSD1306/SH1106 OLED displays when connected to the I2C bus. Tested on various ARM SBCs and Arduinos. The idea is to provide a simple interface for C programmers to make use of those low-cost OLED displays without having to read the data sheet or figure out I2C programming.

Written by Larry Bank Project started 1/15/2017 bitbank@pobox.com

How to use

To build example.c for nrf52832 you need:

1. Change the SDK_ROOT to your nRF5_SDK path.
2. Change if needed flash program in Makefile, the default option is ST-Link (openocd)

   openocd -f interface/stlink.cfg -f target/nrf52.cfg -c 'init_reset halt; program $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex verify; reset; exit'
   

   If you use J-Link (openocd) you need to change it to

    openocd -f interface/jlink.cfg -c "transport select swd" -f target/nrf52.cfg -c 'init_reset halt; program $(OUTPUT_DIRECTORY)/nrf52832_xxaa.hex verify; reset; exit'
   

3. Run make flash to build and flash.

The default parameters:

• OLED address 0x3c
• SDA_PIN 26 (P0.26)
• SCL_PIN 27 (P0.27)

These values can be changed in the oled96.h:

#define SCL_PIN 27
#define SDA_PIN 26

#define I2C_ADDR 0x3c

Latest Changes:

• Change the library to support NRF52 MCUs

Features:

• Efficient individual pixel drawing
• Small, Medium and large fonts (6x8, 8x8, 16x32)
• Invert and flip 180 options (entire display)
• Optional inverted text
• Brightness control
• Support for 64x32, 128x32, 128x64 and 132x64 (SH1106) displays
• Line draw function

---

If you find this code useful, please consider buying me a cup of coffee