When a stereo pair or a group is created, a previously active audio stream appears as paused in the track info area in the STR app

[shorty310]

Issue 1

Title: creating a stereo pair from speakers in standby state results in Preset Key 1's stream showing as paused for a couple of seconds.

Steps

Precondition: speakers are in standby state.

Click on Create stereo pair in the Multi-room screen.

For a couple of seconds, I see the Preset Key 4 highlighted and the track info area is telling me that the stream associated with Preset Key 4 is paused:

There are two runs of this in the log with identical results.

Version

v1.1.0

Log

str-diagnostic-ST10-v1.1.0-20261026-160213.zip

Is this works as designed? No audio is initiated and instead, the audio looks paused for a couple of seconds.

---

Issue 1

Title: creating a group from speakers in standby state results in Preset Key 1's stream showing as paused for an indefinite amount of time.

There are a couple runs of this in the log with identical results.

Version

v1.1.0

Log

str-diagnostic-ST10-v1.1.0-20261026-161412.zip

[JRpersonal]

The speaker part is on purpose. A pair or group made from standby wakes the master, the firmware resumes its last station, and since v1.1.0 STR stops it again before you hear it. A pair goes back to standby about 10 seconds later. A group can't, because it falls apart when its master goes to standby, so it stays awake on a stopped station.

What the app showed was wrong. It had no way to say "stopped", so a stopped speaker looked paused on Key 1, with the old song title still up. In the next release it says "stopped" with a stop symbol, drops the old title, and no key is lit.

[JRpersonal]

v1.1.1 is out with the fix: https://github.com/JRpersonal/streborn/releases/tag/v1.1.1 (build: https://github.com/JRpersonal/streborn/actions/runs/40409910415)

Tell me if that was it.

[shorty310]

Verification on v1.1.1 - test passed for both stereo pair creation and group creation.

Steps

1. Select the Bose 1 speaker and click on Preset Key 6 to start streaming the Jazz Lounge station.
2. Click on the Standy button.
3. Create a group consisting of Bose 1, Bose (Grace Left) and Bose (Grace Right).

The STR app shows this at this point:

4. Select Bose (Grace Left) speaker ad click on Preset Key 6 to start streaming Synchronicity.
5. Click on Create stereo pair with Bose (Grace left) being the main speaker.

The STR app shows this at this point:

Log

str-diagnostic-ST10-v1.1.1-20261027-144729.zip